Bonnets – Spoilers and Bodykits

Bonnet for 150 Series Toyota Prado J150 (11/2009 - 10/2013)-Spoilers and Bodykits Australia

Bonnet for 150 Series Toyota Prado J150 (11/2009 - 10/2013)

$369.00

Bonnet for 150 Series Toyota Prado J150 (11/2009 - 10/2013) This replacement bonnet is designed to fit 150 Series Toyota Prado J150 models manufactured between November 2009 and October 2013. It’s perfect for restoring your Prado’s front-end structure and rugged, factory appearance. Bonnet for 150 Series Toyota Prado J150 (11/2009 - 10/2013) Brand new aftermarket replacement part Full bonnet panel – made to match original dimensions and mounting points Heavy-duty steel construction Compatible with part number(s): TY612102A Direct replacement Ready to install - Professional installation recommended (no fitting instructions included) Built tough for long-lasting performance Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Bonnet for 200 Series Toyota Landcruiser (08/2007 Onwards)

$729.00

Bonnet for 200 Series Toyota Landcruiser (08/2007 Onwards) This steel bonnet is designed to fit Toyota LandCruiser 200 Series models from August 2007 onwards. Built to match factory dimensions, it offers a reliable replacement for damaged or worn panels. Bonnet for 200 Series Toyota Landcruiser (08/2007 Onwards) Brand new aftermarket replacement part Dimensions: Approx. 160cm (L) x 155cm (H) x 15cm (W) Manufactured from high-strength steel with a black finish Compatible with part number(s): TY523102A Direct replacement Ready to install - Professional installation recommended (no fitting instructions included) Built tough for long-lasting performance Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Bonnet for 200 Series Toyota Landcruiser (Road Legal Certified) - Spoilers And Bodykits Australia

Bonnet for 200 Series Toyota Landcruiser - Fully Vented (Road Legal Certified)

$1,569.00

Bonnet for 200 Series Toyota Landcruiser - Fully Vented (Road Legal Certified) If you're looking for a 100% street legal Bonnet for 200 Series Toyota Landcruiser then this is the one for you. Get the cool air in and the hot air out. Tough look, plus tough construction. Give your car that aftermarket look while improving performance. Bonnet for 200 Series Toyota Landcruiser - Fully Vented Give your 200 Series a whole new look and keep the engine cooler with this TOUGH looking bonnet! Vented at front & rear to allow your engine to breathe and improve performance Bigger and higher than standard bonnet - Designed for top mount intercoolers Lighter than standard bonnet: Approx 13.5kg Front Vent width is approx 500mm 100% Street Legal in all States and Territories Supplied with Road Legal Certification letter (Supply us with your VIN Number and Rego number when ordering) Comes with bonnet catch, mesh and bolts (Must use your standard hinges) If your car has washer jets on the bonnet, then you will need to take them off your old bonnet and transfer them over. We provide some tubing for under the bonnet for this (but not the actual jets) Proudly made in Australia This product is made to order - Please see above for approx build time Custom designed to suit this model Full fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

Bonnet for 300C Chrysler Gen 1 - Hellcat Style (2005 - Early 2011 Models) (Road Legal Certified)

$1,489.00

Bonnet for 300C Chrysler Gen 1 - Hellcat Style (2005 - Early 2011 Models) (Road Legal Certified) *** NOTE: If the year model of your car is made in the beginning or ending year as what is listed for this model, then contact us BEFORE purchasing, as your car model may have changed during that year which may make these not fit (We need to know exact month & year of build date) *** If you're looking for a 100% street legal Bonnet for 300C Chrysler - Gen 1 in Hellcat Style then this is the one for you. Get the cool air in and the hot air out. Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet for 300C Chrysler Gen 1 - Hellcat Style (2005 - Early 2011 Models) (Road Legal Certified) Give your 300C front end an upgrade with this super tough looking bonnet! Will fit up to early-2011 models (Are your head lights the same as the images shown? If so, and the year model matches, then this bonnet should fit your car - If you're unsure, just message us) Vented to allow your engine to breathe and improve performance 100% Street Legal in all States and Territories Supplied with Road Legal Certification letter (Supply us with your VIN Number and Rego number) Proudly made in Australia Supplied with front bonnet catch & mesh for behind vents If your car has washer jets on the bonnet, then you will need to take them off your old bonnet and transfer them over. We provide some tubing for under the bonnet for this (but not the actual jets) This product is made to order - Please see above for approx build time Custom designed to suit this model Full fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

Bonnet for 300C Chrysler Gen 1 - Sports Style (2005 - Early 2011 Models) (Road Legal Certified) - Spoilers and Bodykits Australia

Bonnet for 300C Chrysler Gen 1 - Sports Style (2005 - Early 2011 Models) (Road Legal Certified)

$1,489.00

Bonnet for 300C Chrysler Gen 1 - Sports Style (2005 - Early 2011 Models) (Road Legal Certified) *** NOTE: If the year model of your car is made in the beginning or ending year as what is listed for this model, then contact us BEFORE purchasing, as your car model may have changed during that year which may make these not fit (We need to know exact month & year of build date) *** If you're looking for a 100% street legal Bonnet for 300C Chrysler then this is the one for you. Get the cool air in and the hot air out! Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet for 300C Chrysler Gen 1 - Sports Style (2005 - Early 2011 Models) (Road Legal Certified) Give your 300C front end an upgrade with this TOUGH looking bonnet! Will fit up to early-2011 models (Are your head lights the same as the images shown? If so, and the year model matches, then this bonnet should fit your car - If you're unsure, just message us) Large front vent to allow your engine to breathe better and improve performance Supplied with Road Legal Certification letter (Supply us with your VIN number and Registration number when ordering) Proudly made in Australia Supplied with front bonnet catch & mesh for behind vents If your car has washer jets on the bonnet, then you will need to take them off your old bonnet and transfer them over. We provide some tubing for under the bonnet for this (but not the actual jets) This product is made to order - Please see above for approx build time Custom designed to suit this model Full fibreglass construction Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

Bonnet for 300C Chrysler Gen 2 - Hellcat Style (2011 - 2019 Models) (Road Legal Certified) - Spoilers and Bodykits Australia

Bonnet for 300C Chrysler Gen 2 - Hellcat Style (2011 - 2019 Models) (Road Legal Certified)

$1,489.00

Bonnet for 300C Chrysler Gen 2 - Hellcat Style (2011 - 2019 Models) (Road Legal Certified) *** NOTE: IF THE YEAR MODEL OF YOUR CAR IS MADE IN THE BEGINNING OR ENDING YEAR AS WHAT IS LISTED FOR THIS MODEL, THEN CONTACT US BEFORE PURCHASING, AS YOUR CAR MODEL MAY HAVE CHANGED DURING THAT YEAR WHICH MAY MAKE THESE NOT FIT (WE NEED TO KNOW EXACT MONTH & YEAR OF BUILD DATE) *** If you're looking for a 100% street legal Bonnet for 300C Chrysler Gen 2 in Hellcat Style then this is the one for you. Get the cool air in and the hot air out. Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet for 300C Chrysler Gen 2 - Hellcat Style (2011 - 2019 Models) (Road Legal Certified) Give your 300C front end an upgrade with this TOUGH looking bonnet! Will fit 2011 - 2019 models (Are your head lights the same as the images shown? If so, and the year model matches, then this bonnet should fit your car - If you're unsure, just message us) Vented to allow your engine to breathe and improve performance 100% Street Legal in all States and Territories Supplied with Road Legal Certification letter (Supply us with your VIN Number and Rego number) Proudly made in Australia Supplied with front bonnet catch & mesh for behind vents If your car has washer jets on the bonnet, then you will need to take them off your old bonnet and transfer them over. We provide some tubing for under the bonnet for this (but not the actual jets) This product is made to order - Please see above for approx build time Custom designed to suit this model Full fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

Bonnet for 80 Series Toyota Landcruiser (Road Legal Certified) - Spoilers and Bodykits Australia

Bonnet for 80 Series Toyota Landcruiser (Road Legal Certified)

from $1,599.00

Bonnet for 80 Series Toyota Landcruiser (Road Legal Certified) If you're looking for a 100% street legal Bonnet for 80 Series Toyota Landcruiser then this is the one for you. Get the cool air in and the hot air out. Tough look, plus tough construction. Give your car that aftermarket look while improving performance. Bonnet for 80 Series Toyota Landcruiser Give your 80 Series a whole new look and keep the engine cooler with this TOUGH looking bonnet! Vented at front & rear to allow your engine to breathe and improve performance Bigger and higher than standard bonnet - Designed for top mount intercoolers Available with or without side vents in bonnet - Choose which option you want above when ordering (Most pictures shown are WITH side vents) Lighter than standard bonnet: Approx 13kg as opposed to factory weight of approx 20kg+ Front Vent width is approx 700mm 100% Street Legal in all States and Territories Supplied with Road Legal Certification letter (Supply us with your VIN Number and Rego number when ordering) Comes with bonnet catch, mesh and bolts (Must use your standard hinges) If your car has washer jets on the bonnet, then you will need to take them off your old bonnet and transfer them over. We provide some tubing for under the bonnet for this (but not the actual jets) Proudly made in Australia This product is made to order - Please see above for approx build time Custom designed to suit this model Full fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

Bonnet for BA BF Ford Falcon - Vented (Road Legal Certified) - Spoilers And Bodykits Australia

Bonnet for BA / BF Ford Falcon - Vented (Road Legal Certified)

$1,489.00

Bonnet for BA / BF Ford Falcon - Vented (Road Legal Certified) If you're looking for a 100% street legal Bonnet for BA / BF Ford Falcon then this is the one for you. Get the cool air in and the hot air out! Bonnet for BA / BF Ford Falcon - Vented (Road Legal Certified) Give your Falcon a whole new look with this TOUGH looking vented bonnet! 100% Street Legal in all States and Territories Vented at front to get more air to your engine and improve performance Supplied with Road Legal Certification letter (Just supply us with your VIN and Registration number) Supplied with front bonnet catch & mesh for behind vents If your car has washer jets on the bonnet, then you will need to take them off your old bonnet and transfer them over. We provide some tubing for under the bonnet for this (but not the actual jets) Proudly made in Australia This product is made to order - Please see above for approx build time Custom designed to suit this model Full fibreglass construction Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

Bonnet for BMW 3 Series E46 Sedan (09/1998 - 10/2001)-Spoilers and Bodykits Australia

Bonnet for BMW 3 Series E46 Sedan (09/1998 - 10/2001)

$369.00

Bonnet for BMW 3 Series E46 Sedan (09/1998 - 10/2001) This replacement bonnet is designed for BMW 3 Series E46 sedan models built between September 1998 and October 2001, delivering a factory-style fit and finish for a seamless restoration. Bonnet for BMW 3 Series E46 Sedan (09/1998 - 10/2001) Brand new aftermarket replacement part Compatible with original latch and hinge components Steel construction Compatible with part number(s): BM006102A Direct replacement Ready to install - Professional installation recommended (no fitting instructions included) Built tough for long-lasting performance Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Bonnet for BMW 3 Series E46 Sedan 4-Door (2002 - 2005)

$649.00

Bonnet for BMW 3 Series E46 Sedan 4-Door (2002 - 2005) Premium replacement bonnet designed to fit BMW 3 Series E46 4-door sedan models from 2002 to 2005. Built for a seamless fit, making it an ideal solution for repairing front-end damage. Bonnet for BMW 3 Series E46 Sedan 4-Door (2002 - 2005) Brand new aftermarket replacement part Supplied in primer finish – ready for colour matching Fits Sedan model only (2 Door Coupe, Cabrio & Wagon models are different) Direct fitment with factory-style lines and latch points Made from strong metal with a primer black color Compatible with part number(s): BM008102A Direct replacement Ready to install - Professional installation recommended (no fitting instructions included) Built tough for long-lasting performance Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Bonnet for BMW X5 E53 3.0i / 4.4i / 4.6is / 3.0d (2000 - 2003)-Spoilers and Bodykits Australia

Bonnet for BMW X5 E53 3.0i / 4.4i / 4.6is / 3.0d (2000 - 2003)

$699.00

Bonnet for BMW X5 E53 3.0i / 4.4i / 4.6is / 3.0d (2000 - 2003) Replace your damaged or worn bonnet with this premium-quality panel, designed for a perfect fit and factory-style appearance on your BMW X5 E53. Bonnet for BMW X5 E53 3.0i / 4.4i / 4.6is / 3.0d (2000 - 2003) Brand new aftermarket replacement part Precision-formed for accurate fitment and clean alignment with body panels Compatible with part number(s): 41617008328 Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Out of Stock

Bonnet for CE Mitsubishi Lancer / Mirage 2-Door Coupe (06/1996 - 06/2003)

$499.00

Bonnet for CE Mitsubishi Lancer / Mirage 2-Door Coupe (06/1996 - 06/2003) Reliable replacement bonnet to suit CE Mitsubishi Lancer and Mirage 2-door coupe models built from June 1996 to June 2003. Perfect for restoring a clean factory look after accident damage or corrosion. Bonnet for CE Mitsubishi Lancer / Mirage 2-Door Coupe (06/1996 - 06/2003) Brand new aftermarket replacement part Built to match original bonnet shape and fitting points Steel construction Compatible with part number(s): MB034102 Direct replacement Ready to install - Professional installation recommended (no fitting instructions included) Built tough for long-lasting performance Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Bonnet for CE Mitsubishi Lancer / Mirage 2-Door Coupe (06/1996 - 06/2004)

$519.00

Bonnet for CE Mitsubishi Lancer / Mirage 2-Door Coupe (06/1996 - 06/2004) Replacement bonnet to suit CE Mitsubishi Lancer and Mirage 2-door coupe models from June 1996 to June 2004. Made for a precise fit and smooth, factory-style finish. Bonnet for CE Mitsubishi Lancer / Mirage 2-Door Coupe (06/1996 - 06/2004) Brand new aftermarket replacement part Direct bolt-on design using factory mounting points Heavy-duty steel construction with rust-resistant coating Compatible with part number(s): MB034102 Direct replacement Ready to install - Professional installation recommended (no fitting instructions included) Built tough for long-lasting performance Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Bonnet for CH Mitsubishi Lancer (07/2003 - 09/2007)

$449.00

Bonnet for CH Mitsubishi Lancer (07/2003 - 09/2007) Steel bonnet designed to fit Mitsubishi Lancer CH 4-door sedan models built between July 2003 and September 2007. A perfect replacement to restore your vehicle's original look. Bonnet for CH Mitsubishi Lancer (07/2003 - 09/2007) Brand new aftermarket replacement part Made from strong steel with a black finish Compatible with part number(s): MB037102A Direct replacement Ready to install - Professional installation recommended (no fitting instructions included) Built tough for long-lasting performance Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Bonnet for Chrysler 300C (2011 - 2015)-Spoilers and Bodykits Australia

Bonnet for Chrysler 300C (2011 - 2015)

$529.00

Bonnet for Chrysler 300C (2011 - 2015) This replacement bonnet is designed to suit Chrysler 300C models built from 2011 to 2015. A direct-fit panel that restores the vehicle’s factory appearance and structural integrity after damage. Bonnet for Chrysler 300C (2011 - 2015) Brand new aftermarket replacement part Dimensions: 150cm (L) x 170cm (H) x 20cm (W), approx. weight 20kg Heavy-duty steel construction Compatible with part number(s): CR032102A Direct replacement Ready to install - Professional installation recommended (no fitting instructions included) Built tough for long-lasting performance Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Bonnet for Chrysler Valiant Centura KB / KC (Fibreglass)

$1,559.00

Bonnet for Chrysler Valiant Centura KB / KC (Fibreglass) If you're after an Australian made Bonnet for Chrysler Valiant Centura KB / KC, this is the perfect choice. Designed with a tough, durable construction, it not only enhances protection but also gives your car a bold aftermarket look and style. Bonnet for Chrysler Valiant Centura KB / KC (Fibreglass) If your old steel bonnet has rusted out or is looking worse for wear, this full fibreglass copy of the standard one will do the trick 100% Australian made Fits all Valiant Centura KB / KC models Mounts as per factory mounting Has threaded inserts for bonnet hinges and the front locking pin (lighter bonnet springs are highly recommended due to the lighter weight of this bonnet, to ease pressure on the mounts etc) Not ADR approved This product is made to order - Please see above for approx build time Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart Now

Bonnet for CJ / CF Mitsubishi Lancer Sedan / Hatchback (09/2007 - 2017)

$589.00

Bonnet for CJ / CF Mitsubishi Lancer Sedan / Hatchback (09/2007 - 2017) Replacement bonnet to suit CJ and CF Mitsubishi Lancer sedan and hatchback models from September 2007 to 2017. Designed to match original factory fit and finish. Bonnet for CJ / CF Mitsubishi Lancer Sedan / Hatchback (09/2007 - 2017) Brand new aftermarket replacement part Compatible with part number(s):MB038102A Direct replacement Ready to install - Professional installation recommended (no fitting instructions included) Built tough for long-lasting performance Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Bonnet for CJ / CF Mitsubishi Lancer Sedan XA / ASX (2012 - 2017)

$679.00

Bonnet for CJ / CF Mitsubishi Lancer Sedan XA / ASX (2012 - 2017) This replacement bonnet is built to suit CJ and CF Mitsubishi Lancer Sedan, XA, and ASX models from 2012 to 2017. It’s a great option for restoring factory appearance and fit after front-end damage. Bonnet for CJ / CF Mitsubishi Lancer Sedan XA / ASX (2012 - 2017) Brand new aftermarket replacement part Full bonnet panel – designed to match factory contours and dimensions Durable steel construction, supplied ready for paint Direct replacement Ready to install - Professional installation recommended (no fitting instructions included) Built tough for long-lasting performance Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Bonnet for D40 Nissan Navara - MNT Thai Built Only (2005 - 2015)

$539.00

Bonnet for D40 Nissan Navara - MNT Thai Built Only (2005 - 2015) This replacement bonnet is designed to suit Thai-built MNT D40 Nissan Navara models manufactured between 2005 and 2015. It’s built to match factory specifications and restore the front-end structure and style of your Navara. Bonnet for D40 Nissan Navara - MNT Thai Built Only (2005 - 2015) Brand new aftermarket replacement part Dimensions: 160cm (L) x 125cm (H) x 10cm (W) Constructed from high-strength steel Compatible with part number(s): NS552102B Direct replacement Ready to install - Professional installation recommended (no fitting instructions included) Built tough for long-lasting performance Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Bonnet for D40 Nissan Navara - VSK Spain Built Only (2005 - 2010)

$579.00

Bonnet for D40 Nissan Navara - VSK Spain Built Only (2005 - 2010) This replacement bonnet is designed specifically for Spain-built VSK D40 Nissan Navara models from 2005 to 2010. It’s a direct-fit solution made to restore the original structure and appearance of your vehicle’s front end. Bonnet for D40 Nissan Navara - VSK Spain Built Only (2005 - 2010) Brand new aftermarket replacement part Dimensions: 160cm (L) x 125cm (H) x 10cm (W), approx. weight 19kg Made from high-strength steel Compatible with part number(s): NS552102A Direct replacement Ready to install - Professional installation recommended (no fitting instructions included) Built tough for long-lasting performance Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Bonnet for Datsun 720 (1983 - 1985)

$329.00

Bonnet for Datsun 720 (1983 - 1985) Steel bonnet hood designed to suit Nissan 720 models from 1983 to 1985. This version is built without vent or hole openings, offering a clean and classic fit for restoration projects. Bonnet for Datsun 720 (1983 - 1985) Brand new aftermarket replacement part No vent or hole cutouts – clean bonnet style Constructed from durable steel Compatible with part number(s): NS543102A Direct replacement Ready to install - Professional installation recommended (no fitting instructions included) Built tough for long-lasting performance Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Bonnet for Dodge Caliber PM (07/2006 - 2012)-Spoilers and Bodykits Australia

Bonnet for Dodge Caliber PM (07/2006 - 2012)

$479.00

Bonnet for Dodge Caliber PM (07/2006 - 2012) Steel bonnet hood designed to suit Dodge Caliber PM models built between July 2006 and 2012. A strong and practical replacement to restore your vehicle’s front-end appearance. Bonnet for Dodge Caliber PM (07/2006 - 2012) Brand new aftermarket replacement part Manufactured from durable steel with a black finish Approx. dimensions: 104cm (L) x 160cm (H) x 15cm (W) Compatible with part number(s): DG045102A Direct replacement Ready to install - Professional installation recommended (no fitting instructions included) Built tough for long-lasting performance Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Bonnet for Dodge Nitro FE (2003 - 2011)

$589.00

Bonnet for Dodge Nitro FE (2003 - 2011) A direct replacement bonnet designed to suit Dodge Nitro FE models built between 2003 and 2011. Ideal for restoring your front end after damage or wear. Bonnet for Dodge Nitro FE (2003 - 2011) Brand new aftermarket replacement part Steel construction Designed to align with factory mounting points and hinges Compatible with part number(s): DG551102A Direct replacement Ready to install - Professional installation recommended (no fitting instructions included) Built tough for long-lasting performance Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Bonnet for Ford Courier PD (1996 - 1998)

$399.00

Bonnet for Ford Courier PD (1996 - 1998) Replacement bonnet designed to fit Ford Courier PD models from 1996 to 1998. Built to match factory specifications for a clean fit and easy installation. Bonnet for Ford Courier PD (1996 - 1998) Brand new aftermarket replacement part Designed for direct fitment with original bonnet mounts Constructed from high-strength steel with corrosion-resistant coating Compatible with part number(s): FD551102 Direct replacement Ready to install - Professional installation recommended (no fitting instructions included) Built tough for long-lasting performance Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

1 2 3

Huge Range of Awesome Gear

Shipping Aus-Wide

Easy 30 Day Returns

Awesome Customer Service

Ph: 1300 362 376

Mon-Fri (9am-5pm)

Email: sales@spoilersandbodykits.com.au

COLLECTIONS Roof Spoilers Weather Shields Bonnet Scoops Head Light Eyebrows All Lights Large Boot Spoilers Front Grills Bonnet Protectors Flares Bonnets Vents

INFO & SUPPORT FAQ's About Us Contact Us Shipping Customer Reviews Why Shop With Us Buy Now Pay Later Basic Fitting Guides Bundle Deals Become an Ambassador Earn Rewards Returns Terms & Conditions Privacy Policy

GET SOCIAL Follow us on Facebook