Bonnets

Vehicle bonnets protect engine components while contributing to overall vehicle safety and styling. Damage from accidents, corrosion, or wear can affect fitment and appearance. This collection includes aftermarket bonnets designed as replacement panels for a wide range of vehicles.

Our bonnets are manufactured for correct alignment and structural integrity. Replacing a damaged bonnet restores vehicle appearance, safety, and proper panel fitment.

Explore our bonnets to restore factory-style fit and finish.

Read

Bonnet for VE Holden Commodore - Vented Sports Style (Road Legal Certified)

Bonnet for VE Holden Commodore - Vented Sports Style (Road Legal Certified) - Spoilers and Bodykits Australia

Bonnet for VE Holden Commodore - Vented Sports Style (Road Legal Certified)

$1,489.00

Bonnet for VE Holden Commodore - Vented - Vented Sports Style (Road Legal Certified) If you're looking for a 100% street legal Bonnet for VE Holden Commodore then this is the one for you. Get the cool air in and the hot air out. Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet for VE Holden Commodore - Vented Sports Style (Road Legal Certified) Pump out the front of your VE Commodore with this super TOUGH looking bonnet! Vented to allow your engine to breathe and improve performance Fits series 1 & 2 model VE Commodores (Including Calais & Berlina models) Note: Will NOT fit Caprice / Statesman or Series 3 (E3) models 100% Street Legal in all States and Territories Supplied with Road Legal Certification letter (Just supply us with your VIN & Rego number when ordering so certification can be made up for your car) Proudly made in Australia Supplied with front bonnet catch & mesh for behind vents If your car has washer jets on the bonnet, then you will need to take them off your old bonnet and transfer them over. We provide some tubing for under the bonnet for this (but not the actual jets) This product is made to order - Please see above for approx build time Full fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW

Bonnet for VF Holden Commodore (Road Legal Certified) - Spoilers and Bodykits Australia

Bonnet for VF Holden Commodore (Road Legal Certified)

$1,489.00

Bonnet for VF Holden Commodore (Road Legal Certified) If you're looking for a 100% street legal Bonnet for VF Holden Commodore then this is the one for you. Get the cool air in and the hot air out. Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet for VF Holden Commodore - Camaro Style (Road Legal Certified) Pump out the front of your VF Commodore with this super TOUGH looking bonnet! Vented to allow your engine to breathe and improve performance Approx 30mm higher than a standard bonnet in the centre & weighs approx 12-14kg Vents are cut out and functional (See underside image) 100% Street Legal in all States and Territories Supplied with Road Legal Certification letter (Supply us with your VIN Number and Rego number) Proudly made in Australia Supplied with front bonnet catch & mesh for behind vents If your car has washer jets on the bonnet, then you will need to take them off your old bonnet and transfer them over. We provide some tubing for under the bonnet for this (but not the actual jets) This product is made to order - Please see above for approx build time Custom designed to suit this model Full fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW

Bonnet for VF Holden Commodore - Vented Sports Style (Road Legal Certified) - Spoilers and Bodykits Australia

Bonnet for VF Holden Commodore - Vented Sports Style (Road Legal Certified)

$1,489.00

Bonnet for VF Holden Commodore - Vented Sports Style (Road Legal Certified) If you're looking for a 100% street legal Bonnet for VF Holden Commodore then this is the one for you. Get the cool air in and the hot air out. Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet for VF Holden Commodore - Vented Sports Style (Road Legal Certified) Pump out the front of your VF Commodore with this super TOUGH looking bonnet! Vented to allow your engine to breathe and improve performance Approx 30mm higher than a standard bonnet in the centre & weighs approx 12-14kg 100% Street Legal in all States and Territories Supplied with Road Legal Certification letter (Just supply us with your VIN & Rego number when ordering so certification can be made up for your car) Proudly made in Australia Supplied with front bonnet catch & mesh for behind vents If your car has washer jets on the bonnet, then you will need to take them off your old bonnet and transfer them over. We provide some tubing for under the bonnet for this (but not the actual jets) Uses all the original mounting points This product is made to order - Please see above for approx build time Full fibreglass construction Custom designed to suit this model Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW

Bonnet for VL Holden Commodore (Fibreglass)

$1,239.00

Bonnet for VL Holden Commodore (Fibreglass) If you're after an Australian made Bonnet for VL Holden Commodore, this is the perfect choice. Designed with a tough, durable construction, it not only enhances protection but also gives your car a bold aftermarket look and style. Bonnet for VL Holden Commodore (Fibreglass) If your old steel bonnet has rusted out or is looking worse for wear, this full fibreglass copy of the standard one will do the trick 100% Australian made Fits all VL Commodore models Mounts as per factory mounting Has threaded inserts for bonnet hinges and the front locking pin Not ADR approved This product is made to order - Please see above for approx build time Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart Now

Bonnet for Volkswagen Golf MK5 / GTI / R32 3-Door / 5-Door (2003 - 2008)-Spoilers and Bodykits Australia

Bonnet for Volkswagen Golf MK5 / GTI / R32 3-Door / 5-Door (2003 - 2008)

$449.00

Bonnet for Volkswagen Golf MK5 / GTI / R32 3-Door / 5-Door (2003 - 2008) Steel replacement bonnet to suit Volkswagen Golf MK5, including GTI and R32 models, both 3-door and 5-door variants from 2003 to 2008. Built for a clean factory-style fit. Bonnet for Volkswagen Golf MK5 / GTI / R32 3-Door / 5-Door (2003 - 2008) Brand new aftermarket replacement part Manufactured from durable steel with a black finish Compatible with part number(s): VW005102A Direct replacement Ready to install - Professional installation recommended (no fitting instructions included) Built tough for long-lasting performance Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Bonnet for Volkswagen Polo 9N (2005 - 2010)

$589.00

Bonnet for Volkswagen Polo 9N (2005 - 2010) Restore your Polo’s front-end with this replacement bonnet, designed to fit 9N models from 2005 to 2010. A perfect fit for accident repairs or general panel replacement. Bonnet for Volkswagen Polo 9N (2005 - 2010) Brand new aftermarket replacement part Precision-formed to match original contours and mounting points Steel construction Designed to suit hatchback body style Compatible with part number(s): VW020102A Direct replacement Ready to install - Professional installation recommended (no fitting instructions included) Built tough for long-lasting performance Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Bonnet for VT VX Holden Commodore - VT Monaro Style (Road Legal Certified) - Spoilers And Bodykits Australia

Bonnet for VT / VU / VX Holden Commodore - Monaro Style (Road Legal Certified)

$1,489.00

Bonnet for VT / VU / VX Holden Commodore - Monaro Style (Road Legal Certified) If you're looking for a 100% street legal Bonnet for VT / VU / VX Holden Commodore in Monaro Style then this is the one for you. Get the cool air in and the hot air out. Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet for VT / VU / VX Holden Commodore - Monaro Style (Road Legal Certified) Pump out the front of your Commodore with this super TOUGH looking bonnet! Vented to allow your engine to breathe and improve performance Fits VT / VU / VX Commodores (Will not fit Monaro models) Approx 20-30mm higher than a standard bonnet in the centre so you can fit supercharger's etc Tough fibreglass construction - weighs approx 12-14kg - Lighter than a standard bonnet 100% Street Legal in all States and Territories Supplied with Road Legal Certification letter (Just supply us with your VIN & Rego number when ordering so certification can be made up for your car) Proudly made in Australia Supplied with front bonnet catch & mesh for behind vents If your car has washer jets on the bonnet, then you will need to take them off your old bonnet and transfer them over. We provide some tubing for under the bonnet for this (but not the actual jets) Uses all the original mounting points This product is made to order - Please see above for approx build time Custom designed to suit this model Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made item so please note that some adjustment etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW!

Bonnet for VT / VX / VU Holden Commodore Sedan / Ute / Wagon (1997 - 2002)

$469.00

Bonnet for VT / VX / VU Holden Commodore Sedan / Ute / Wagon (1997 - 2002) Replace your damaged or aging bonnet with this quality aftermarket panel, made to fit VT, VX, and VU Holden Commodore models across sedan, ute, and wagon body styles from 1997 to 2002. Bonnet for VT / VX / VU Holden Commodore Sedan / Ute / Wagon (1997 - 2002) Brand new aftermarket replacement part Suits sedan, ute, and wagon variants Steel construction Compatible with part number(s): HL061102 Direct replacement Ready to install - Professional installation recommended (no fitting instructions included) Built tough for long-lasting performance Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Bonnet for VY Holden Commodore - VT Monaro Style (Road Legal Certified) - Spoilers And Bodykits Australia

Bonnet for VY Holden Commodore - Monaro Style (Road Legal Certified)

$1,489.00

Bonnet for VY Holden Commodore - Monaro Style (Road Legal Certified) If you're looking for a 100% street legal Bonnet for VY Holden Commodore in Monaro Style then this is the one for you. Get the cool air in and the hot air out. Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet for VY Holden Commodore - Monaro Style (Road Legal Certified) Pump out the front of your Commodore with this super TOUGH looking bonnet! Vented to allow your engine to breathe and improve performance Fits VY Commodores (Will not fit Monaro models) Approx 20-30mm higher than a standard bonnet in the centre so you can fit supercharger's etc Weighs approx 12-14kg - Lighter than a standard bonnet 100% Street Legal in all States and Territories Supplied with Road Legal Certification letter (Just supply us with your VIN & Rego number when ordering so certification can be made up for your car) Proudly made in Australia Supplied with front bonnet catch & mesh for behind vents If your car has washer jets on the bonnet, then you will need to take them off your old bonnet and transfer them over. We provide some tubing for under the bonnet for this (but not the actual jets) Uses all the original mounting points This product is made to order - Please see above for approx build time Full fibreglass construction Custom designed to suit this model Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

Bonnet for VY Holden Commodore SS / SV6 (09/2002 - 08/2004)

$519.00

Bonnet for VY Holden Commodore SS / SV6 (09/2002 - 08/2004) This replacement bonnet is designed to suit VY Holden Commodore SS and SV6 models built between September 2002 and August 2004, restoring the original look and structural integrity of your front end. Bonnet for VY Holden Commodore SS / SV6 (09/2002 - 08/2004) Brand new aftermarket replacement part Engineered to match original contours and mounting points Compatible with part number(s): HL064102A Direct replacement Ready to install - Professional installation recommended (no fitting instructions included) Built tough for long-lasting performance Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Bonnet for VZ Holden Commodore (2004 - 2006)

$519.00

Bonnet for VZ Holden Commodore (2004 - 2006) This replacement bonnet is designed to suit VZ Holden Commodore models built from 2004 to 2006. It's a perfect solution for restoring the front-end appearance and structural strength of your vehicle. Bonnet for VZ Holden Commodore (2004 - 2006) Brand new aftermarket replacement part Full bonnet panel – precision-built for factory-style fit and contour Dimensions: 145cm (L) x 155cm (H) x 10cm (W), approx. weight 15kg Heavy-duty steel construction Compatible with part number(s): HL064102B Direct replacement Ready to install - Professional installation recommended (no fitting instructions included) Built tough for long-lasting performance Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Bonnet for VZ Holden Commodore - VT Monaro Style (Road Legal Certified) - Spoilers And Bodykits Australia

Bonnet for VZ Holden Commodore - Monaro Style (Road Legal Certified)

$1,489.00

Bonnet for VZ Holden Commodore - Monaro Style (Road Legal Certified) If you're looking for a 100% street legal Bonnet for VZ Holden Commodore in Monaro Style then this is the one for you. Get the cool air in and the hot air out. Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet for VZ Holden Commodore - Monaro Style (Road Legal Certified) Pump out the front of your Commodore with this super TOUGH looking bonnet! Vented to allow your engine to breathe and improve performance Fits VZ Commodores (Will not fit Monaro models) Approx 20-30mm higher than a standard bonnet in the centre so you can fit supercharger's etc Weighs approx 12-14kg - Lighter than a standard bonnet 100% Street Legal in all States and Territories Supplied with Road Legal Certification letter (Just supply us with your VIN & Rego number when ordering so certification can be made up for your car) Proudly made in Australia Supplied with front bonnet catch & mesh for behind vents If your car has washer jets on the bonnet, then you will need to take them off your old bonnet and transfer them over. We provide some tubing for under the bonnet for this (but not the actual jets) Uses all the original mounting points This product is made to order - Please see above for approx build time Full fibreglass construction Custom designed to suit this model Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

Bonnet with 2 Jet Holes for Toyota Echo Hatchback NCP10 3-Door / 5-Door (1999 - 2005)

$409.00

Bonnet with 2 Jet Holes for Toyota Echo Hatchback NCP10 3-Door / 5-Door (1999 - 2005) This replacement bonnet is designed specifically for Toyota Echo NCP10 hatchback models, featuring twin washer jet holes for compatibility with factory setup. A great option for replacing damaged or worn panels. Bonnet with 2 Jet Holes for Toyota Echo Hatchback NCP10 3-Door / 5-Door (1999 - 2005) Brand new aftermarket replacement part Precision fit with factory-style latch and hinge mounts Compatible with part number(s): TY202102A Direct replacement Ready to install - Professional installation recommended (no fitting instructions included) Built tough for long-lasting performance Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Bonnet with Hump for BA / BF Ford Falcon XR8 GT (10/2002 - 02/2008)

$959.00

Bonnet with Hump for BA / BF Ford Falcon XR8 GT (10/2002 - 02/2008) Give your Falcon a bold, aggressive look with this hump-style bonnet, designed to suit BA and BF XR8 GT models from 2002 to 2008. Perfect for performance builds or replacing a damaged original. Bonnet with Hump for BA / BF Ford Falcon XR8 GT (10/2002 - 02/2008) Brand new aftermarket replacement part Features integrated power bulge/hump for enhanced styling and clearance Designed to fit factory mounting points and maintain original panel gaps Compatible with part number(s): FD032102B Direct replacement Ready to install - Professional installation recommended (no fitting instructions included) Built tough for long-lasting performance Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Bonnet with Turbo / Vent Hole for Toyota Hilux Vigo 2WD / 4WD (06/2011 - 09/2015)

$389.00

Bonnet with Turbo / Vent Hole for Toyota Hilux Vigo 2WD / 4WD (06/2011 - 09/2015) This replacement bonnet with turbo/vent hole is designed to suit Toyota Hilux Vigo 2WD and 4WD models built from June 2011 to September 2015. It’s perfect for turbocharged variants, offering a factory-style fit and aggressive look. Bonnet with Turbo / Vent Hole for Toyota Hilux Vigo 2WD / 4WD (06/2011 - 09/2015) Brand new aftermarket replacement part Dimensions: 115cm (L) x 155cm (H) x 15cm (W) Heavy-duty steel construction Compatible with part number(s): TY549102B Direct replacement Ready to install - Professional installation recommended (no fitting instructions included) Built tough for long-lasting performance Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Bonnet with Turbo Hole for D22 Nissan Navara Series 3 (01/2000 - 12/2007)

$369.00

Bonnet with Turbo Hole for D22 Nissan Navara Series 3 (01/2000 - 12/2007) Steel bonnet with turbo hole designed to suit Nissan Navara D22 Series 3 models from 2001 to December 2007. Finished in primer black and built for a factory-style fit on turbo-equipped variants. Bonnet with Turbo Hole for D22 Nissan Navara Series 3 (01/2000 - 12/2007) Brand new aftermarket replacement part Includes turbo hole opening – compatible with turbo models Made from durable steel with a black finish Compatible with part number(s): NS551102B Direct replacement Ready to install - Professional installation recommended (no fitting instructions included) Built tough for long-lasting performance Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Out of Stock

Bonnet with Turbo Hole for MK Mitsubishi Triton 2WD / 4WD (10/1996 - 06/2006)

$439.00

Bonnet with Turbo Hole for MK Mitsubishi Triton 2WD / 4WD (10/1996 - 06/2006) Turbo-style replacement bonnet to suit MK Mitsubishi Triton 2WD and 4WD models from October 1996 to June 2006. Features the raised turbo hole for compatibility with factory or aftermarket turbo setups. Bonnet with Turbo Hole for MK Mitsubishi Triton 2WD / 4WD (10/1996 - 06/2006) Brand new aftermarket replacement part Includes factory-style turbo hole for added clearance and airflow Matches original bonnet dimensions and mounting points Solid steel construction with protective anti-rust coating Compatible with part number(s): MB544102C Direct replacement Ready to install - Professional installation recommended (no fitting instructions included) Built tough for long-lasting performance Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Bonnet with Turbo Hole for Subaru Forester X / XS / XT SH (01/2008 - 12/2012)

$519.00

Bonnet with Turbo Hole for Subaru Forester X / XS / XT SH (01/2008 - 12/2012) Upgrade or replace your bonnet with this turbo-hole version, designed to suit SH-series Subaru Forester X, XS, and XT models from 2008 to 2012. Perfect for turbo conversions or replacing damaged panels on factory turbo models. Bonnet with Turbo Hole for Subaru Forester X / XS / XT SH (01/2008 - 12/2012) Brand new aftermarket replacement part Includes cutout for top-mount intercooler – ideal for turbocharged models Built to match original dimensions for seamless fit and appearance Steel construction Compatible with part number(s): SB523102B Direct replacement Ready to install - Professional installation recommended (no fitting instructions included) Built tough for long-lasting performance Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Bonnet with Turbo Hole for Subaru Impreza / WRX G3 4-Door (09/2008 - 02/2014) & 5-Door (08/2007 - 02/2014)

$839.00

Bonnet with Turbo Hole for Subaru Impreza / WRX G3 4-Door (09/2008 - 02/2014) & 5-Door (08/2007 - 02/2014) Steel bonnet with turbo hole opening designed to suit Subaru Impreza and WRX G3 models — 4-door from September 2008 to February 2014 and 5-door from August 2007 to February 2014. Built to match turbo-equipped models for a factory-style finish. Bonnet with Turbo Hole for Subaru Impreza / WRX G3 4-Door (09/2008 - 02/2014) & 5-Door (08/2007 - 02/2014) Brand new aftermarket replacement part Features factory-style turbo hole opening Made from strong steel with an unfinished black coating Approx. dimensions: 125cm (L) x 145cm (H) x 10cm (W), Weight: 15kg Compatible with part number(s): SB039102B Direct replacement Ready to install - Professional installation recommended (no fitting instructions included) Built tough for long-lasting performance Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Bonnet with Turbo Hole for Subaru Impreza WRX / STI G2 4-Door (09/2005 - 09/2008) & 5-Door (09/2005 - 07/2007)

$959.00

Bonnet with Turbo Hole for Subaru Impreza WRX / STI G2 4-Door (09/2005 - 09/2008) & 5-Door (09/2005 - 07/2007) Steel bonnet with turbo scoop opening designed to suit Subaru Impreza WRX/STI G2 models — 4-door from September 2005 to September 2008 and 5-door from September 2005 to July 2007. Perfect for turbo-equipped vehicles needing a replacement panel. Bonnet with Turbo Hole for Subaru Impreza WRX / STI G2 4-Door (09/2005 - 09/2008) & 5-Door (09/2005 - 07/2007) Brand new aftermarket replacement part Includes turbo hole opening for factory-style scoop Constructed from durable steel with a black finish Approx. dimensions: 135cm (L) x 145cm (H) x 15cm (W) Compatible with part number(s): SB038102B Direct replacement Ready to install - Professional installation recommended (no fitting instructions included) Built tough for long-lasting performance Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Bonnet with Turbo Hole for Toyota Hilux Ute 2WD / 4WD (02/2005 - 05/2011)

$409.00

Bonnet with Turbo Hole for Toyota Hilux Ute 2WD / 4WD (02/2005 - 05/2011) Heavy-duty replacement bonnet featuring a factory-style turbo scoop opening, made to suit Toyota Hilux 2WD and 4WD utes from February 2005 to May 2011. Perfect for turbo models requiring proper airflow and a clean OEM-style fit. Bonnet with Turbo Hole for Toyota Hilux Ute 2WD / 4WD (02/2005 - 05/2011) Brand new aftermarket replacement part Includes integrated turbo hole for compatibility with factory scoop Steel construction Compatible with part number(s): TY548102B Direct replacement Ready to install - Professional installation recommended (no fitting instructions included) Built tough for long-lasting performance Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Bonnet with Turbo Vent for Holden Rodeo RA Ute (10/2006 - 06/2012)

$509.00

Bonnet with Turbo Vent for Holden Rodeo RA Ute (10/2006 - 06/2012) Steel bonnet with integrated turbo vent to suit Holden Rodeo RA Ute models from October 2006 to June 2012. Designed for a seamless fit and ideal for turbo-equipped variants. Bonnet with Turbo Vent for Holden Rodeo RA Ute (10/2006 - 06/2012) Brand new aftermarket replacement part Made from high-strength steel with black finish Approx. dimensions: 110cm (L) x 145cm (H) x 10cm (W) Includes turbo vent opening for factory-style compatibility Compatible with part number(s): HL513102B Direct replacement Ready to install - Professional installation recommended (no fitting instructions included) Built tough for long-lasting performance Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Bonnet with Vent for Datsun 720 (1980 - 1985)

$409.00

Bonnet with Vent for Datsun 720 (1980 - 1985) Replace your old or damaged bonnet with this vented version made to suit Datsun 720 models from 1980 to 1985. Designed for a clean fit and added engine bay airflow. Bonnet with Vent for Datsun 720 (1980 - 1985) Brand new aftermarket replacement part Includes integrated bonnet vent for enhanced airflow and factory-style appearance Built to factory dimensions for easy fitment and alignment Steel construction Compatible with part number(s): NS542102A Direct replacement Ready to install - Professional installation recommended (no fitting instructions included) Built tough for long-lasting performance Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Bonnet without Badge Hole for Nissan Pulsar N16 Sedan Series 2 (05/2003 - 01/2006)

$369.00

Bonnet without Badge Hole for Nissan Pulsar N16 Sedan Series 2 (05/2003 - 01/2006) This replacement bonnet is designed to suit Nissan Pulsar N16 Series 2 Sedan models from May 2003 to January 2006, featuring a clean design with no badge hole. Perfect for restoring the front-end appearance without the need for emblem fitment. Bonnet without Badge Hole for Nissan Pulsar N16 Sedan Series 2 (05/2003 - 01/2006) Brand new aftermarket replacement part No badge hole – ideal for a clean, smooth bonnet finish Dimensions: 115cm (L) x 140cm (H) x 10cm (W), approx. weight 15kg Compatible with part number(s): NS020102B Direct replacement Ready to install - Professional installation recommended (no fitting instructions included) Built tough for long-lasting performance Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers