EVO 7 / 8 / 9 – Spoilers and Bodykits

-10% sale

Rear Boot Spoiler Wing for CH Mitsubishi Lancer 4 Door Sedan - EVO 8 Style - Spoilers and Bodykits Australia

Rear Boot Spoiler Wing for CH Mitsubishi Lancer 4 Door Sedan - EVO 8 Style

$649.00 $715.00

Rear Spoiler Wing for CH Mitsubishi Lancer 4 Door Sedan - EVO 8 Style *** Fits CH 4 Door Sedan Models Only *** If you're looking for a Rear Spoiler Wing for CH Mitsubishi Lancer 4 Door Sedan in EVO 8 Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Rear Spoiler Wing for CH Mitsubishi Lancer 4 Door Sedan - EVO 8 Style Pump out the rear end of your Lancer with this large rear wing! Fits CH Lancer 4 door sedan ES / VR-X models 100% Australian made Covers existing holes from standard spoiler Full one-piece design This product is made to order - Please see above for approx build time Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW!

Out of Stock -25% sale

Weather Shields for CH Mitsubishi Lancer EVO 7 / 8 / 9 - Spoilers and Bodykits Australia

Weather Shields for Mitsubishi Lancer CH Sedan (2003 - 2007 Models)

$117.00 $155.00

Weather Shields for Mitsubishi Lancer CH Sedan (2003 - 2007 Models) *** NOTE: If the year model of your car is made in the beginning or ending year as what is listed for this model, then contact us BEFORE purchasing, as your car model may have changed during that year which may make these not fit (We need to know exact month & year of build date) *** If you're looking for a set of Weather Shields for Mitsubishi Lancer CH Sedan then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Weather Shields for Mitsubishi Lancer CH Sedan (2003 - 2007 Models) Fits CH / ES / VR-X / Exceed models High quality translucent black perspex plastic (These are NOT solid black in colour) Darkly tinted black yet extremely easy to see through Highly resistant to cracking and discolouring in the sunlight Ready to fit - Comes with 3M double sided tape on back of weather shields for easy installation Supplied with basic installation instructions Heavy duty UV resistant Reduces harsh sunlight and wind noise Minimises heat inside car when parked Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Out of Stock -13% sale

Rear Window Roof Spoiler for CH Mitsubishi Lancer EVO 7 / 8 / 9 Sedan (2003 - 2008 Models) - Spoilers and Bodykits Australia

Rear Window Roof Spoiler for CH Mitsubishi Lancer EVO 7 / 8 / 9 Sedan (2003 - 2008 Models)

$189.00 $215.00

Rear Window Roof Spoiler for CH Mitsubishi Lancer EVO 7 / 8 / 9 Sedan (2003 - 2008 Models) If you're looking for a Rear Window Roof Spoiler for Mitsubishi Lancer EVO 7 / 8 / 9 Sedan then this is the one for you. Tough look, plus tough construction. Give your car that sleek aftermarket look and make it stand out from the crowd! Rear Window Roof Spoiler for CH Mitsubishi Lancer EVO 7 / 8 / 9 Sedan (2003 - 2008 Models) Fits sedan ES / LS / VR / VR-X models Customise your pride and joy with this sleek & stylish roof spoiler Dark translucent black in colour - Dark enough for a near black look but can still easily see through it Made of extremely durable & high quality UV resistant acrylic No need to paint Easy installation - Has 3M double sided tape on back of spoiler for easy attachment to car Supplied with spoiler is: 3M brand double sided tape, prep pads, tube of 3M tape primer & basic installation instructions Please allow 1-3 days for handling BEFORE this item is shipped out to you Super TOUGH look plus increases your cars value Limited Stock - Add to Cart Now! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world! Important note: Prior to fitting this product, ensure your vehicle is thoroughly washed and clean ensuring the mating surface you are fitting the product to is free from any GREASE / WAX / POLISH or any other contaminants. As surface preparation is very important, we recommend the use of a “Wash and Grease Remover” solution to be used on the mating surface as per directions on the solvent bottle you use. Failing to prepare the surface correctly, you risk the possibility of the product not adhering to the surface correctly & coming off. Be sure to sit this spoiler on your car BEFORE trying to stick it to your car. The double sided tape (provided on back of spoiler) and using some sikaflex/urethane (not supplied), can be used to stick the spoiler down. When fitting, apply firm but not excessive pressure or weight. If you are in any way unsure of how to attach this to your vehicle, please get a professional to attach it. We will not be held liable for any fitment issues for how you or anyone else fits this spoiler or the item becoming unattached from your vehicle. Failing to follow these instructions will void any return or refund policy on the product.

-12% sale

Front Lip for Mitsubishi Lancer EVO 8 (2003 - 2005 Models) - Spoilers and Bodykits Australia

Front Lip for Mitsubishi Lancer EVO 8 (2003 - 2005 Models)

$339.00 $385.00

Front Lip for Mitsubishi Lancer EVO 8 (2003 - 2005 Models) If you're looking for a Front Lip for Mitsubishi Lancer EVO 8 then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Front Lip for Mitsubishi Lancer EVO 8 (2003 - 2005 Models) This front lip attaches to the bottom of your original front bar Super tough Poly-Urethane construction Matt black in colour Front lip can be painted or left as is Supplied with all screws needed to fit Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

-28% sale

Oxygen Sensor for Mitsubishi Lancer EVO 8 - Pre-Cat (2004 - 2005) - Spoilers and Bodykits Australia

Oxygen Sensor for Mitsubishi Lancer EVO 8 - Pre-Cat (2004 - 2005)

$69.00 $95.00

Oxygen Sensor for Mitsubishi Lancer EVO 8 - Pre-Cat (2004 - 2005) If you're looking for aftermarket parts and accessories for your ride then you've come to the right place. Whether you want to freshen up your ride or your old gear is worn out, this quality part will get the job done. Give your car that aftermarket look and style. Oxygen Sensor for Mitsubishi Lancer EVO 8 - Pre-Cat (2004 - 2005) Brand new aftermarket replacement part Direct Replacement 4 Connector Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Shipping Australia Wide Make Model Series Year Engine Engine Code Location Mitsubishi Lancer EVO VIII 01/2004-07/2005 I4 2.0L 4G63T Pre-Cat Sensor Mitsubishi Pajero NP 06/2005-09/2006 V6 3.8L 6G75 Pre-Cat Sensor Left only Mitsubishi Pajero NS 10/2006-12/2008 V6 3.8L 6G75 2x Pre-Cat Sensor

-14% sale

Rear Boot Lip Spoiler for Mitsubishi Lancer EVO 8 - Spoilers and Bodykits Australia

Rear Boot Lip Spoiler for Mitsubishi Lancer EVO 8

$99.00 $115.00

Rear Boot Lip Spoiler for Mitsubishi Lancer EVO 8 If you're looking for a Rear Boot Lip Spoiler for Mitsubishi Lancer EVO 8 then this is the one for you. Tough look, plus tough construction. Give your car that sleek aftermarket look and make it stand out from the crowd! Rear Boot Lip Spoiler for Mitsubishi Lancer EVO 8 Add that extra touch to your car with this sleek boot lip spoiler Made of tough polyurethane - Because of the pliable, flexible material, this spoiler can be curved to fit your car easily Matt black in colour (Unpainted non-glossy finish) Has 3M double sided tape on back of spoiler - See Important Note Below PLEASE NOTE: This spoiler may come in a tube or rolled up in a package (Depends on your location). Because of the flexible material of this spoiler, this does NOT affect its final shape. Heating this spoiler up in the sun or with a heat gun or similar will allow this spoiler to mould to many different shapes. Please allow 1-3 days for handling BEFORE this item is shipped out to you Tough look plus increases your cars value Limited Stock - Add to Cart Now! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world! Important note: Prior to fitting this product, ensure your vehicle is thoroughly washed and clean ensuring the mating surface you are fitting the product to is free from any GREASE / WAX / POLISH or any other contaminants. As surface preparation is very important, we recommend the use of a “Wash and Grease Remover” solution to be used on the mating surface as per directions on the solvent bottle you use. Failing to prepare the surface correctly, you risk the possibility of the product not adhering to the surface correctly & coming off. Be sure to sit this spoiler on your car BEFORE trying to stick it to your car. DO NOT panic when you receive this spoiler thinking it is not the exact shape of your car. These spoilers are made to mould to all different shapes. So you must heat this item up out in the sun, with a heat gun or hair dryer which will make it nicely pliable to mould to the shape of your car. The double sided tape (provided on back of spoiler) and using some sikaflex/urethane (not supplied), can be used to stick the spoiler down. We also recommend screwing it down. When fitting, apply firm but not excessive pressure or weight. If you are in any way unsure of how to attach this to your vehicle, please get a professional to attach it. We will not be held liable for any fitment issues for how you or anyone else fits this spoiler or the item becoming unattached from your vehicle. Failing to follow these instructions will void any return or refund policy on the product.

Out of Stock -25% sale

Rear Roof Fin Spoiler for Mitsubishi Lancer EVO 7 / 8 / 9 Sedan - Carbon Fibre Look Style (2001 - 2008) - Spoilers and Bodykits Australia

Rear Roof Fin Spoiler for Mitsubishi Lancer EVO 7 / 8 / 9 Sedan - Carbon Fibre Look Style (2001 - 2008)

$239.00 $315.00

Rear Roof Fin Spoiler for Mitsubishi Lancer EVO 7 / 8 / 9 Sedan - Carbon Fibre Look Style (2001 - 2008) If you're looking for a Rear Roof Fin Spoiler for Mitsubishi Lancer EVO 7 / 8 / 9 Sedan in Carbon Fibre Look Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style! Rear Roof Fin Spoiler for Mitsubishi Lancer EVO 7 / 8 / 9 Sedan - Carbon Fibre Look Style (2001 - 2008) Give the rear of your car a whole new look with this TOUGH looking rear roof spoiler! Made of strong, high quality ABS plastic Carbon fibre look finish Easy fitment High quality durable finish Custom designed to suit this model Tough look plus increases your cars value Shipping Australia Wide Scroll up and Order NOW

-11% sale

Front Lip for Mitsubishi Lancer EVO 9 - RALLIART Style (2006 - 2007 Models)

$389.00 $435.00

Front Lip for Mitsubishi Lancer EVO 9 - RALLIART Style (2006 - 2007 Models) If you're looking for a Front Lip for Mitsubishi Lancer EVO 9 in RALLIART Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look while improving performance. Front Lip for Mitsubishi Lancer EVO 9 - RALLIART Style (2006 - 2007 Models) This front lip attaches to the bottom of your original front bar Super tough Poly-Urethane construction Matt black in colour Front lip can be painted or left as is Supplied with all screws needed to fit Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

-5% sale

Front Bumper Bar for Mitsubishi Lancer EVO 8 / EVO 9 - EVO 9 Style - Spoilers and Bodykits Australia

Front Bumper Bar for Mitsubishi Lancer EVO 8 / EVO 9 - EVO 9 Style

$739.00 $775.00

Front Bumper Bar for Mitsubishi Lancer EVO 8 / EVO 9 - EVO 9 Style If you're looking for a Front Bumper Bar for Mitsubishi Lancer EVO 8 / EVO 9 in EVO 9 Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Front Bumper Bar for Mitsubishi Lancer EVO 8 / EVO 9 - EVO 9 Style Give the front end of your Lancer a whole new look with this TOUGH looking front bumper bar! 100% Australian made Full 1 piece front bumper Custom designed to suit this model Quality fibreglass construction Super strong build quality This product is made to order - Please see above for approx build time Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

-13% sale

Front Bumper Bar for CH Mitsubishi Lancer - EVO 8 Style (Sedan Only) - Spoilers and Bodykits Australia

Front Bumper Bar for CH Mitsubishi Lancer Sedan - EVO 8 Style

$719.00 $825.00

Front Bumper Bar for CH Mitsubishi Lancer Sedan - EVO 8 Style *** Fits Sedan Models Only *** If you're looking for a Front Bumper Bar for CH Mitsubishi Lancer Sedan in EVO 8 Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Front Bumper Bar for CH Mitsubishi Lancer Sedan - EVO 8 Style Give your Lancer a whole new look with this TOUGH looking front bumper bar! 100% Australian made Fits Sedan models only Not supplied with mesh This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

-18% sale

Carbon Fibre Front Bumper Lip for Mitsubishi Lancer EVO 8 / MR (2003 - 2005) - Spoilers and Bodykits Australia

Carbon Fibre Front Bumper Lip for Mitsubishi Lancer EVO 8 / MR (2003 - 2005)

$649.00 $785.00

Carbon Fibre Front Bumper Lip for Mitsubishi Lancer EVO 8 / MR (2003 - 2005) If you're looking for a Carbon Fibre Front Bumper Lip for Mitsubishi Lancer EVO 8 / MR then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style! Carbon Fibre Front Bumper Lip for Mitsubishi Lancer EVO 8 / MR (2003 - 2005) Give the front of your car a whole new look with this TOUGH looking lower lip! Made of high quality real carbon fibre with fibreglass reinforced plastic Coated in a clear glossy anti-UV durable finish Easy fitment - Meant to be attached to the bottom of the standard front bumper with urethane & small screws (drilling required) Please allow 2-3 days for handling BEFORE this item is shipped to you High quality durable finish Custom designed to suit this model Tough look plus increases your cars value Shipping Australia Wide Scroll up and Order NOW

-18% sale

Carbon Fibre Front Bumper Lip for Mitsubishi Lancer EVO 8 / MR (2003 - 2005)

$649.00 $785.00

-8% sale

Front Bumper Bar for Mitsubishi Lancer EVO 7 - Spoilers and Bodykits Australia

Front Bumper Bar for Mitsubishi Lancer EVO 7

$599.00 $645.00

Front Bumper Bar for Mitsubishi Lancer EVO 7 If you're looking for a Front Bumper Bar for Mitsubishi Lancer EVO 7 then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Front Bumper Bar for Mitsubishi Lancer EVO 7 Give the front end of your Lancer a new look with this tough looking front bumper bar! 100% Australian made Does not include mesh This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Please make sure you pre-fit this item before prepping/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) Note that this is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW!

Huge Range of Awesome Gear

Shipping Aus-Wide

Easy 30 Day Returns

Awesome Customer Service

Ph: 1300 362 376

Mon-Fri (9am-5pm)

Email: sales@spoilersandbodykits.com.au

COLLECTIONS Roof Spoilers Weather Shields Bonnet Scoops Head Light Eyebrows All Lights Large Boot Spoilers Front Grills Bonnet Protectors Flares Bonnets Vents

INFO & SUPPORT FAQ's About Us Contact Us Shipping Customer Reviews Why Shop With Us Buy Now Pay Later Basic Fitting Guides Bundle Deals Become an Ambassador Earn Rewards Returns Terms & Conditions Privacy Policy

GET SOCIAL Follow us on Facebook