Bonnet Scoops

If you're looking for a bonnet scoop for your ride then you've come to the right place. Spoilers And Bodykits has a large range of bonnet scoops that will not only toughen up the look of your vehicle but can also be used functionally if needed. From Ford, Holden, Mitsubishi, Nissan, Toyota and many more, we've got you covered, take a look at the full range below!

Read

-16% sale

Bonnet Scoop for 100 Series Toyota Landcruiser - Spoilers And Bodykits Australia

Bonnet Scoop for 100 / 105 Series Toyota Landcruiser

$429.00 $505.00

Bonnet Scoop for 100 / 105 Series Toyota Landcruiser If you're looking for a Bonnet Scoop for 100 / 105 Series Toyota Landcruiser then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet Scoop for 100 / 105 Series Toyota Landcruiser Give your 4x4 some air flow and a new look with this TOUGH looking bonnet scoop! Large universal style bonnet scoop - Will fit most 4WD bonnets; We've had people fit these to Landcruiser's, D40 Navara's & many other 4x4's (Some models may need slight modification to suit any curve in a bonnet) 100% Australian made Approx measurements: Height 80mm, Depth/Length: 560mm, Width: 720mm For mounting, it has threaded inserts on underside of scoop moulded into it, to screw bolts into (Bolts supplied with scoop) Scoop has a flat bottom profile (Vent does not stick down past the flat bottom profile of scoop) This product is made to order - Please see above for approx build time Strong fibreglass construction Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW!

-13% sale

Bonnet Scoop for VE Holden Commodore - Spoilers and Bodykits Australia

Bonnet Scoop for VE Holden Commodore

$459.00 $525.00

Bonnet Scoop for VE Holden Commodore If you're looking for a Bonnet Scoop for VE Holden Commodore then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet Scoop for VE Holden Commodore Give the front end of your Commodore a whole new look with this super TOUGH looking bonnet scoop! This bonnet scoop has inner flange to screw & glue down onto your bonnet Vents are not 'cut out' - Although you can do this yourself Scoop measures approx: 90cm long x 60cm wide x 10cm high Will not fit Caprice models (Some modifications may make it fit though) 100% Australian made This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

-13% sale

Bonnet Scoop for Landcruiser / Patrol / Navara / BT-50 / Triton / Colorado / D-MAX / Amarok / Hilux - Spoilers and Bodykits Australia

Bonnet Scoop for Landcruiser / Patrol / Navara / BT-50 / Triton / Colorado / D-MAX / Amarok / Hilux

$379.00 $435.00

Bonnet Scoop for Landcruiser / Patrol / Navara / BT-50 / Triton / Colorado / D-MAX / Amarok / Hilux If you're looking for a 100% Australian made Bonnet Scoop for Landcruiser / Patrol / Navara / BT-50 / Triton / Colorado / D-MAX / Amarok / Hilux then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet Scoop for Landcruiser / Patrol / Navara / BT-50 / Triton / Colorado / D-MAX / Amarok / Hilux Pump out the front end of your 4x4 and give it some extra air flow with this TOUGH looking bonnet scoop! Fits most models with its universal design - Will fit most model 4x4 bonnets. We've had customers fit these to: GQ/GU Patrol's, 75/76/78/79/80/100 series Landcruiser's, Navara's, Hilux's, Triton's, Rodeo's, Ranger's, BT-50's and many more (Some models may need some slight sanding etc in places for a snug fit) Measures approx: 600mm wide (at front & rear) x 650mm long x 50mm high Built in threaded studs for easy installation 100% Australian made This product is made to order - Please see above for approx build time Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the automotive world!

-13% sale

Bonnet Scoop for VE Holden Commodore - Walky Style - Spoilers and Bodykits Australia

Bonnet Scoop for VE Holden Commodore - Walkinshaw Style

$549.00 $625.00

Bonnet Scoop for VE Holden Commodore - Walkinshaw Style If you're looking for a Bonnet Scoop for VE Holden Commodore in Walkinshaw Style then this is the one for you. SUPER Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet Scoop for VE Holden Commodore - Walkinshaw Style Give your Commodore a whole new look with this tough looking bonnet scoop! 100% Australian made Will not fit Caprice models (Some slight modifications may make it fit though) Has an inner frame on underside for mounting that has a return edge to glue with urethane and screws This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW!

-14% sale

Bonnet Scoop for VE Holden Commodore - 2 Inch Reverse Cowl Style

$409.00 $475.00

Bonnet Scoop for VE Holden Commodore - 2 Inch Reverse Cowl Style If you're looking for a Bonnet Scoop for VE Holden Commodore in 2 Inch Reverse Cowl then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet Scoop for VE Holden Commodore - 2 Inch Reverse Cowl Style Toughen up the front end of your VE with this popular 'retro' style reverse cowl bonnet scoop! 100% Australian made Approx 2 inches in height at rear Has reverse opening Meant to be attached to bonnet with urethane and small screws This product is made to order - Please see above for approx build time Custom designed to suit this model Super strong build quality Full fibreglass construction Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

-12% sale

Bonnet Scoop for VB / VC / VH / VK Holden Commodore Reverse Cowl - VH SS Group 3 Style - Spoilers and Bodykits Australia

Bonnet Scoop for VB / VC / VH / VK Holden Commodore Reverse Cowl - VH SS Group 3 Style

$419.00 $475.00

Bonnet Scoop for VB / VC / VH / VK Holden Commodore Reverse Cowl - VH SS Group 3 Style If you're looking for a Bonnet Scoop for VB / VC / VH / VK Holden Commodore Reverse Cowl in VH SS Group 3 Style then this is the one for you! Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet Scoop for VB / VC / VH / VK Holden Commodore Reverse Cowl - VH SS Group 3 Style Give your Commodore a whole new look with this tough looking bonnet scoop! 100% Australian made Has reverse opening at rear (Reverse cowl) Supplied with fittings - Mounts as per original (Screws into bonnet) Approx height of this bonnet scoop is 1 & 3/4 inches This product is made to order - Please see above for approx build time Custom designed to suit this model Super strong build quality Full fibreglass construction Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

-14% sale

Bonnet Scoop for VY / VZ Holden Commodore - 3 Inch Reverse Cowl

$409.00 $475.00

Bonnet Scoop for VY / VZ Holden Commodore - 3 Inch Reverse Cowl If you're looking for a Bonnet Scoop for VY / VZ Holden Commodore then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet Scoop for VY / VZ Holden Commodore - 3 Inch Reverse Cowl Toughen up the entire front end of your Commodore with this tough looking bonnet scoop! 100% Australian made Meant to be attached to bonnet with urethane and small screws If you have a bonnet garnish, scoop may need slight trimming around it This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

-13% sale

Bonnet Scoop for VY / VZ Holden Commodore - Walky Style - Spoilers and Bodykits Australia

Bonnet Scoop for VY / VZ Holden Commodore - Walkinshaw Style

$539.00 $615.00

Bonnet Scoop for VY / VZ Holden Commodore - Walkinshaw Style If you're looking for a Bonnet Scoop for VY / VZ Holden Commodore in Walkinshaw Style then this is the one for you. SUPER Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet Scoop for VY / VZ Holden Commodore - Walkinshaw Style Give your Commodore a whole new look with this tough looking bonnet scoop! 100% Australian made NOTE: For a VY bonnet a slight gap will need to be filled at rear where bonnet 'lines' are (At the point where bonnet scoop 'wings' kick out) Does not fit Statesman models Fittings & mesh supplied Meant to be attached to bonnet with screws - Has metal tabs on underside for where to put screws This product is made to order - Please see above for approx build time Full fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

-16% sale

Bonnet Scoop Louvre for VL Holden Commodore - Walkinshaw Style - Spoilers and Bodykits Australia

Bonnet Scoop Louvre for VL Holden Commodore - Walkinshaw Style

$199.00 $235.00

Bonnet Scoop Louvre for VL Holden Commodore - Walkinshaw Style If you're looking for a Bonnet Scoop Louvre for VL Holden Commodore in Walkinshaw Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet Scoop Louvre for VL Holden Commodore - Walkinshaw Style Fits into the Walkinshaw style bonnet scoop 100% Australian made This louvre is approx 640mm wide which fits the Walkinshaw scoop (Contact us with your measurements if unsure) Meant to be glued in at contact points on each side using urethane or similar This product is made to order - Please see above for approx build time Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

-13% sale

Bonnet Scoop for VY Holden Commodore - Reverse Cowl VK SS Style

$329.00 $375.00

Bonnet Scoop for VY Holden Commodore - Reverse Cowl VK SS Style If you're looking for a Bonnet Scoop for VY Holden Commodore in Reverse Cowl VK SS Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style! Bonnet Scoop for VY Holden Commodore - Reverse Cowl VK SS Style Toughen up the front end of your Commodore with this sleek bonnet scoop! 100% Australian made Made specifically for the VY Commodore bonnet Reverse cowl style (Opening at rear of scoop) Meant to be attached to bonnet with urethane and small screws (Has inner flange for this) Does not run full length of bonnet This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

-12% sale

Bonnet Scoop for VR / VS Holden Commodore - 2 Inch Reverse Cowl

$419.00 $475.00

Bonnet Scoop for VR / VS Holden Commodore - 2 Inch Reverse Cowl If you're looking for Bonnet Scoop for VR / VS Holden Commodore 2 Inch Reverse Cowl then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet Scoop for VR / VS Holden Commodore - 2 Inch Reverse Cowl Sleek low-line design to toughen up the front end of your VR / VS Commodore! 100% Australian made Meant to be attached to bonnet with urethane and small screws Covers full length of bonnet This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

-15% sale

Bonnet Scoop for GQ / GU Nissan Patrol - Spoilers And Bodykits Australia

Bonnet Scoop for GQ / GU Nissan Patrol

$449.00 $525.00

Bonnet Scoop for GQ / GU Nissan Patrol If you're looking for a Bonnet Scoop for GQ / GU Nissan Patrol then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet Scoop for GQ / GU Nissan Patrol Give your 4x4 some air flow and a new look with this TOUGH looking bonnet scoop! Large universal style bonnet scoop - Made to fit GQ / GU Patrols - May still need some slight modification - Will fit most 4WD bonnets; We've had people fit these to Landcruiser's, D40 Navara's & many other 4x4's (Some models may need slight modification to suit any curve in a bonnet) 100% Australian made Approx measurements: Height 80mm, Depth/Length: 560mm, Width: 720mm For mounting, it has threaded inserts on underside of scoop moulded into it, to screw bolts into (Bolts supplied with scoop) Scoop has a flat bottom profile (Vent does not stick down past the flat bottom profile of scoop) This product is made to order - Please see above for approx build time Strong fibreglass construction Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW!

-17% sale

Bonnet Scoop for VE Holden Commodore - Reverse Cowl - VK Retro Style - Spoilers and Bodykits Australia

Bonnet Scoop for VE Holden Commodore - Reverse Cowl - VK Retro Style

$339.00 $405.00

Bonnet Scoop for VE Holden Commodore - Reverse Cowl - VK Retro Style If you're looking for a Bonnet Scoop for VE Holden Commodore in VK Retro Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet Scoop for VE Holden Commodore - Reverse Cowl - VK Retro Style Toughen up the front end of your VE with this popular 'retro' style reverse cowl bonnet scoop! 100% Australian made Has reverse opening (Reverse cowl) Fits the contour of the VE bonnet perfectly Has threaded studs on underside of scoop to screw bolts into (Does not have inner flange to glue sikaflex / urethane on - It must be bolted to bonnet) Approx 75mm in height at rear opening (Approx only) This product is made to order - Please see above for approx build time Custom designed to suit this model Quality guaranteed Super strong build quality Full fibreglass construction Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

-20% sale

Bonnet Scoop for Hilux / Patrol / Landcruiser - Universal Design for Most Bonnets - Hilux Style - Spoilers and Bodykits Australia

Bonnet Scoop for Hilux / GQ/GU Patrol / Landcruiser - Universal Design for Most Bonnets - Hilux Style

$189.00 $235.00

Bonnet Scoop for Hilux / GQ/GU Patrol / Landcruiser - Universal Design for Most Bonnets - Hilux Style If you're looking for a Bonnet Scoop for your 4x4 then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style! Bonnet Scoop for Hilux / GQ/GU Patrol / Landcruiser - Universal Design for Most Bonnets - Hilux Style Give the front end of your 4x4 a whole new look with this sleek bonnet scoop! Small style bonnet scoop in Hilux style - Will fit most 4WD bonnets - Multi fit capability Made of high quality ABS injection plastic with a great looking satin black finish No need to paint - Can be installed as is - Save time & money over preparing a fibreglass scoop (But you can paint it if you want it to match your cars colour) Built in fin directs air down into your engine bay, keeping your engine cooler (Fin sticks out past the flat bottom profile of scoop) Easy installation - Supplied with template sheet to mark out exactly where to install scoop on your bonnet Has screw inserts in scoop to attach to bonnet Approx Measurements of Scoop: 370mm long x 345mm wide Approx Measurements of Vent: 265mm wide x 52mm high Please allow 2-3 days for handling BEFORE this item is shipped to you High quality durable finish (Surface may have a slight scuff mark from storage) Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the automotive world!

-16% sale

Bonnet Scoop for VT / VX Holden Commodore - 4 Inch Reverse Cowl - Spoilers and Bodykits Australia

Bonnet Scoop for VT / VU / VX Holden Commodore - 4 Inch Reverse Cowl

$369.00 $435.00

Bonnet Scoop for VT / VU / VX Holden Commodore - 4 Inch Reverse Cowl If you're looking for a Bonnet Scoop for VT / VU / VX Holden Commodore - 4 Inch Reverse Cowl then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet Scoop for VT / VU / VX Holden Commodore - 4 Inch Reverse Cowl Give your Commodore a whole new look with this tough looking bonnet scoop! 100% Australian made Shaped to exact shape of bonnet Meant to be attached to bonnet with urethane and small screws This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

-15% sale

Bonnet Scoop for XE / XF Ford Falcon - 4 Inch Reverse Cowl

$379.00 $445.00

Bonnet Scoop for XE / XF Ford Falcon - 4 Inch Reverse Cowl If you're looking for 100% Australian made Bonnet Scoop for XE / XF Ford Falcon then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet Scoop for XE / XF Ford Falcon - 4 Inch Reverse Cowl Give your Falcon a whole new look with this tough looking bonnet scoop! 100% Australian made Meant to be glued to bonnet with urethane and small screws This product is made to order - Please see above for approx build time Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

-14% sale

Bonnet Scoop for VE Holden Commodore - 4 Inch Reverse Cowl

$349.00 $405.00

Bonnet Scoop for VE Holden Commodore - 4 Inch Reverse Cowl If you're looking for a Bonnet Scoop for VE Holden Commodore then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet Scoop for VE Holden Commodore - 4 Inch Reverse Cowl Give your Commodore a whole new look with this tough looking bonnet scoop! 100% Australian made Meant to be attached to bonnet with urethane and small screws Will not fit Caprice models (Some modifications may make it fit though) This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

-39% sale

Bonnet Bulge for BA / BF Ford Falcon (Universal Design) - Spoilers and Bodykits Australia

Bonnet Bulge for BA / BF Ford Falcon

$269.00 $435.00

Bonnet Bulge for BA / BF Ford Falcon If you're looking for 100% Australian made Bonnet Bulge for BA / BF Ford Falcon then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet Bulge for BA / BF Ford Falcon (Universal Design) Give your bonnet some extra 'BULGE' without having to get a complete bonnet! Universal design - Can be made to fit a lot of different style bonnets 100% Australian made Note that this is a bonnet 'bulge' that is to be attached onto your existing bonnet (This is not a listing for an entire bonnet - See pictures indicating the item) This product is made to order - Please see above for approx build time Can be grafted onto your bonnet (This is a job you will want a professional to do) Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

-14% sale

Bonnet Scoop for VY / VZ Holden Commodore - 4 Inch Reverse Cowl

$409.00 $475.00

Bonnet Scoop for VY / VZ Holden Commodore - 4 Inch Reverse Cowl If you're looking for a Bonnet Scoop for VY / VZ Holden Commodore then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet Scoop for VY / VZ Holden Commodore - 4 Inch Reverse Cowl Toughen up the entire front end of your Commodore with this tough looking bonnet scoop! 100% Australian made Meant to be attached to bonnet with urethane and small screws If you have a bonnet garnish, scoop may need slight trimming around it This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Out of Stock -9% sale

Bonnet Scoop for PX 2 Ford Ranger (2015 - 2018 Models) - Spoilers and Bodykits Australia

Bonnet Scoop for PX2 / PX3 Ford Ranger (2015 - 2020 Models)

$347.00 $380.00

Bonnet Scoop for PX2 / PX3 Ford Ranger (2015 - 2020 Models) If you're looking for a Bonnet Scoop for PX2 / PX3 Ford Ranger then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet Scoop for PX2 / PX3 Ford Ranger (2015 - 2020 Models) Pump out the front end of your Ranger with this super TOUGH bonnet scoop! Quality black plastic construction Approx measurements of scoop: 720mm width at centre x 680mm width at rear x 600mm width at front x 1100mm length Note: This bonnet scoop won't fit properly if you have a bonnet protector - You need to trim the scoop slightly for it to fit Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Super strong build quality Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Important note: Prior to fitting this product, ensure your vehicle is thoroughly washed and clean ensuring the mating surface you are fitting the product to is free from any GREASE / WAX / POLISH or any other contaminants. As surface preparation is very important, we recommend the use of a “Wash and Grease Remover” solution to be used on the mating surface as per directions on the solvent bottle you use. Failing to prepare the surface correctly, you risk the possibility of the product not adhering to the surface correctly & coming off. We recommend you screw this scoop down too) When fitting, apply firm but not excessive pressure or weight. Failing to follow these instructions will void your warranty on the product.

-24% sale

Twin Vent Bonnet Scoop - Universal Design to Fit Most Bonnets

$309.00 $405.00

Twin Vent Bonnet Scoop - Universal Design to Fit Most Bonnets If you're looking for a Twin Vent Bonnet Scoop to Fit Most Bonnets then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Twin Vent Bonnet Scoop - Universal Design to Fit Most Bonnets Give your car's front end a whole new look with this TOUGH looking bonnet scoop! 100% Australian made Can be made to fit pretty much any model bonnet with some modification - Can use Sikaflex/Urethane to fill any small gaps (We've had customers fit these on Hilux's, VS Commodores and many more) Length: 70cm, Width: 67cm, Vent width: 55cm, Height: Approx 6cm Meant to be attached with urethane & small screws This product is made to order - Please see above for approx build time Full fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

-15% sale

Bonnet Scoop for VN / VG / VP Holden Commodore - VN Group A Style - Spoilers and Bodykits Australia

Bonnet Scoop for VN / VG / VP Holden Commodore - VN Group A Style

$339.00 $395.00

Bonnet Scoop for VN / VG / VP Holden Commodore - VN Group A Style If you're looking for a Bonnet Scoop for VN / VG / VP Holden Commodore in VN Group A Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet Scoop for VN / VG / VP Holden Commodore - VN Group A Style Give your Commodore a whole new look with this tough looking bonnet scoop! 100% Australian made This scoop is fully enclosed (Does not have any vents/openings) Can fit many different style bonnets with the same curve Has inserts in flange on underneath of scoop for mounting - Recommended to use urethane for an additional strong bond also This product is made to order - Please see above for approx build time Full fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

-15% sale

Universal Bonnet Scoop - Twin Opening

$339.00 $395.00

Universal Bonnet Scoop - Twin Opening If you're looking for a 100% Australian made Universal Bonnet Scoop with Twin Opening then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Universal Bonnet Scoop - Twin Opening Give your car's front end a whole new look with this TOUGH looking bonnet scoop! Fits most models - Get the cool air in and hot air out 100% Australian made Approx measurements: Width: 730mm, Length: 690mm, Height: 80mm Meant to be attached with urethane & small screws This product is made to order - Please see above for approx build time Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

-10% sale

Bonnet Scoop for PX 2 Ford Ranger - Vented (2015 - 2018 Models) - Spoilers and Bodykits Australia

Bonnet Scoop for PX2 / PX3 Ford Ranger - Vented (2015 - 2020 Models)

$347.00 $385.00

Bonnet Scoop for PX2 / PX3 Ford Ranger - Vented (2015 - 2020 Models) If you're looking for a Vented Bonnet Scoop for PX2 / PX3 Ford Ranger then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet Scoop for PX2 / PX3 Ford Ranger - Vented (2015 - 2020 Models) Pump out the front end of your Ranger with this super TOUGH bonnet scoop! Vented - Has vent at front (with mesh) and a vent at rear of scoop Quality black plastic construction Approx measurements of scoop: 720mm width at centre x 680mm width at rear x 600mm width at front x 1100mm length Approx measurements of front vent: 350mm long x 35mm width/height Note: This bonnet scoop won't fit properly if you have a bonnet protector - You need to trim the scoop slightly for it to fit Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Super strong build quality Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Important note: Prior to fitting this product, ensure your vehicle is thoroughly washed and clean ensuring the mating surface you are fitting the product to is free from any GREASE / WAX / POLISH or any other contaminants. As surface preparation is very important, we recommend the use of a “Wash and Grease Remover” solution to be used on the mating surface as per directions on the solvent bottle you use. Failing to prepare the surface correctly, you risk the possibility of the product not adhering to the surface correctly & coming off. We recommend you screw this scoop down too. When fitting, apply firm but not excessive pressure or weight. Failing to follow these instructions will void your warranty on the product.

1 2 3

Huge Range of Awesome Gear

Shipping Aus-Wide

Easy 30 Day Returns

Awesome Customer Service

Ph: 1300 362 376

Mon-Fri (9am-5pm)

Email: sales@spoilersandbodykits.com.au

COLLECTIONS Roof Spoilers Weather Shields Bonnet Scoops Head Light Eyebrows All Lights Large Boot Spoilers Front Grills