Lancer

Aftermarket Parts & Accessories for Mitsubishi Lancer

The Mitsubishi Lancer has earned a reputation for reliability and versatility across multiple generations. This collection features aftermarket parts and accessories suitable for a wide range of Lancer models.

From everyday replacement parts to functional and styling upgrades, these products are selected to support both standard road use and enthusiast builds.

Browse our aftermarket parts and accessories range for Mitsubishi Lancer's.

Read

Rear Boot Spoiler Wing for CH Mitsubishi Lancer 4 Door Sedan - EVO 8 Style - Spoilers and Bodykits Australia

Rear Boot Spoiler Wing for CH Mitsubishi Lancer 4 Door Sedan - EVO 8 Style

$649.00

Rear Spoiler Wing for CH Mitsubishi Lancer 4 Door Sedan - EVO 8 Style If you're looking for a Rear Spoiler Wing for CH Mitsubishi Lancer 4 Door Sedan in EVO 8 Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Rear Spoiler Wing for CH Mitsubishi Lancer 4 Door Sedan - EVO 8 Style Pump out the rear end of your Lancer with this large rear wing! Note: Fits CH Lancer 4-Door sedan ES / VR-X models only 100% Australian made Covers existing holes from standard spoiler Full one-piece design This product is made to order - Please see above for approx build time Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW

Out of Stock

Weather Shields for CE Mitsubishi Lancer Sedan (1996 - 2002 Models) - Spoilers and Bodykits Australia

Weather Shields for CE Mitsubishi Lancer Sedan (1996 - 2002 Models)

$119.00

Weather Shields for CE Mitsubishi Lancer Sedan (1996 - 2002 Models) *** NOTE: If the year model of your car is made in the beginning or ending year as what is listed for this model, then contact us BEFORE purchasing, as your car model may have changed during that year which may make these not fit (We need to know exact month & year of build date) *** If you're looking for a set of Weather Shields for CE Mitsubishi Lancer Sedan then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Weather Shields for CE Mitsubishi Lancer Sedan (1996 - 2002 Models) Supplied as a set of 4 Fits GLi / GLXi / GL / CE / CE 2 models High quality translucent black perspex plastic (These are NOT solid black in colour) Darkly tinted black yet extremely easy to see through Highly resistant to cracking and discolouring in the sunlight Ready to fit - Comes with 3M double sided tape on back of weather shields for easy installation Supplied with basic installation instructions Heavy duty UV resistant Reduces harsh sunlight and wind noise Minimises heat inside car when parked Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Rear Roof Fin Spoiler for Mitsubishi CJ / CF Lancer Sedan (2007 - 2017 Models) - Spoilers and Bodykits Australia

Rear Roof Fin Spoiler for Mitsubishi CJ / CF Lancer Sedan (2007 - 2017 Models)

$139.00

Rear Roof Fin Spoiler for Mitsubishi CJ / CF Lancer Sedan (2007 - 2017 Models) If you're looking for a Rear Roof Fin Spoiler for Mitsubishi CJ / CF Lancer Sedan then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style! Rear Roof Fin Spoiler for Mitsubishi CJ / CF Lancer Sedan (2007 - 2017 Models) Give the rear end of your Lancer a whole new look with this TOUGH looking roof fins spoiler! Fits Lancer sedan 2007 - 2017 - Active / ES / ES Sport / LX / Ralliart / SX / VR / VR-X / Evolution / MR models Made of high quality ABS injection plastic with a great looking satin black finish No need to paint - Can be installed as is - Save time & money over preparing a fibreglass spoiler (But you can paint it if you want it to match your cars colour) Easy installation - Meant to be attached with a strong adhesive like sikaflex / urethane and/or double sided tape (Not supplied) Outer lip tucks under factory roof plastic seal mould Please allow 2-3 days for handling BEFORE this item is shipped to you High quality durable finish (Surface may have a slight scuff mark from storage) Custom designed to suit this model Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the automotive world!

Out of Stock

Weather Shields for CH Mitsubishi Lancer EVO 7 / 8 / 9 - Spoilers and Bodykits Australia

Weather Shields for Mitsubishi Lancer CH Sedan (2003 - 2007 Models)

$119.00

Weather Shields for Mitsubishi Lancer CH Sedan (2003 - 2007 Models) *** NOTE: If the year model of your car is made in the beginning or ending year as what is listed for this model, then contact us BEFORE purchasing, as your car model may have changed during that year which may make these not fit (We need to know exact month & year of build date) *** If you're looking for a set of Weather Shields for Mitsubishi Lancer CH Sedan then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Weather Shields for Mitsubishi Lancer CH Sedan (2003 - 2007 Models) Fits CH / ES / VR-X / Exceed models High quality translucent black perspex plastic (These are NOT solid black in colour) Darkly tinted black yet extremely easy to see through Highly resistant to cracking and discolouring in the sunlight Ready to fit - Comes with 3M double sided tape on back of weather shields for easy installation Supplied with basic installation instructions Heavy duty UV resistant Reduces harsh sunlight and wind noise Minimises heat inside car when parked Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Out of Stock

Rear Window Roof Spoiler for CH Mitsubishi Lancer EVO 7 / 8 / 9 Sedan (2003 - 2008 Models) - Spoilers and Bodykits Australia

Rear Window Roof Spoiler for CH Mitsubishi Lancer EVO 7 / 8 / 9 Sedan (2003 - 2008 Models)

$189.00

Rear Window Roof Spoiler for CH Mitsubishi Lancer EVO 7 / 8 / 9 Sedan (2003 - 2008 Models) If you're looking for a Rear Window Roof Spoiler for Mitsubishi Lancer EVO 7 / 8 / 9 Sedan then this is the one for you. Tough look, plus tough construction. Give your car that sleek aftermarket look and make it stand out from the crowd! Rear Window Roof Spoiler for CH Mitsubishi Lancer EVO 7 / 8 / 9 Sedan (2003 - 2008 Models) Fits sedan ES / LS / VR / VR-X models Customise your pride and joy with this sleek & stylish roof spoiler Dark translucent black in colour - Dark enough for a near black look but can still easily see through it Made of extremely durable & high quality UV resistant acrylic No need to paint Easy installation - Has 3M double sided tape on back of spoiler for easy attachment to car Supplied with spoiler is: 3M brand double sided tape, prep pads, tube of 3M tape primer & basic installation instructions Please allow 1-3 days for handling BEFORE this item is shipped out to you Super TOUGH look plus increases your cars value Limited Stock - Add to Cart Now! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world! Important note: Prior to fitting this product, ensure your vehicle is thoroughly washed and clean ensuring the mating surface you are fitting the product to is free from any GREASE / WAX / POLISH or any other contaminants. As surface preparation is very important, we recommend the use of a “Wash and Grease Remover” solution to be used on the mating surface as per directions on the solvent bottle you use. Failing to prepare the surface correctly, you risk the possibility of the product not adhering to the surface correctly & coming off. Be sure to sit this spoiler on your car BEFORE trying to stick it to your car. The double sided tape (provided on back of spoiler) and using some sikaflex/urethane (not supplied), can be used to stick the spoiler down. When fitting, apply firm but not excessive pressure or weight. If you are in any way unsure of how to attach this to your vehicle, please get a professional to attach it. We will not be held liable for any fitment issues for how you or anyone else fits this spoiler or the item becoming unattached from your vehicle. Failing to follow these instructions will void any return or refund policy on the product.

Rear Bumper Bar Skirt / Diffuser for CJ Mitsubishi Lancer Sedan - Twin Exhaust Outlets (09/2007 - 2018 Models) - Spoilers and Bodykits Australia

Rear Bumper Bar Skirt / Diffuser for CJ Mitsubishi Lancer Sedan - Twin Exhaust Outlets (09/2007 - 2018 Models)

$449.00

Rear Skirt / Diffuser for CJ Mitsubishi Lancer Sedan - Twin Exhaust Outlets (09/2007 - 2018 Models) If you're looking for a Rear Skirt / Diffuser for CJ Mitsubishi Lancer Sedan with Twin Exhaust Outlets then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Rear Skirt / Diffuser for CJ Mitsubishi Lancer Sedan - Twin Exhaust Outlets (09/2007 - 2018 Models) Give the rear end of your Lancer a whole new look with this rear skirt diffuser! Rear bar needs cutting to allow for second exhaust outlet (Meant to be attached to the bottom of your rear bumper bar using urethane & screws) Fits all CJ Sedan models (VRX etc) One exhaust hole can be filled in if you only want it to suit a single exhaust (Contact us for this - Costs extra) 100% Australian made This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Out of Stock

Weather Shields for Mitsubishi CJ / CF Lancer Sedan (2007 - 2017 Models) - Spoilers and Bodykits Australia

Weather Shields for Mitsubishi CJ / CF Lancer Sedan (2007 - 2017)

$119.00

Weather Shields for Mitsubishi CJ / CF Lancer Sedan (2007 - 2017) If you're looking for a set of Weather Shields for Mitsubishi CJ / CF Lancer Sedan then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Weather Shields for Mitsubishi CJ / CF Lancer Sedan (2007 - 2017) Supplied as a set of 4 High quality translucent black perspex plastic (These are NOT solid black in colour) Darkly tinted black yet extremely easy to see through Highly resistant to cracking and discolouring in the sunlight Ready to fit - Comes with 3M double sided tape on back of weather shields for easy installation Supplied with basic installation instructions Heavy duty UV resistant Reduces harsh sunlight and wind noise Minimises heat inside car when parked Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW

Out of Stock

Rear Window Roof Spoiler for CE Mitsubishi Lancer Sedan (1996 - 2000 Models) - Spoilers and Bodykits Australia

Rear Window Roof Spoiler for CE Mitsubishi Lancer Sedan (1996 - 2000 Models)

$189.00

Rear Window Roof Spoiler for CE Mitsubishi Lancer Sedan (1996 - 2000 Models) If you're looking for a Rear Window Roof Spoiler for CE Mitsubishi Lancer Sedan then this is the one for you. Tough look, plus tough construction. Give your car that sleek aftermarket look and make it stand out from the crowd! Rear Window Roof Spoiler for CE Mitsubishi Lancer Sedan (1996 - 2000 Models) Customise your pride and joy with this sleek & stylish roof spoiler! Dark translucent black in colour - Dark enough for a near black look but can still easily see through it Made of extremely durable & high quality UV resistant acrylic No need to paint Easy installation - Has 3M double sided tape on back of spoiler for easy attachment to car Supplied with spoiler is: 3M brand double sided tape, prep pads, tube of 3M tape primer & basic installation instructions Please allow 1-3 days for handling BEFORE this item is shipped out to you Super TOUGH look plus increases your cars value Limited Stock - Add to Cart Now! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world! Important note: Prior to fitting this product, ensure your vehicle is thoroughly washed and clean ensuring the mating surface you are fitting the product to is free from any GREASE / WAX / POLISH or any other contaminants. As surface preparation is very important, we recommend the use of a “Wash and Grease Remover” solution to be used on the mating surface as per directions on the solvent bottle you use. Failing to prepare the surface correctly, you risk the possibility of the product not adhering to the surface correctly & coming off. Be sure to sit this spoiler on your car BEFORE trying to stick it to your car. The double sided tape (provided on back of spoiler) and using some sikaflex/urethane (not supplied), can be used to stick the spoiler down. When fitting, apply firm but not excessive pressure or weight. If you are in any way unsure of how to attach this to your vehicle, please get a professional to attach it. We will not be held liable for any fitment issues for how you or anyone else fits this spoiler or the item becoming unattached from your vehicle. Failing to follow these instructions will void any return or refund policy on the product.

Rear Window Roof Spoiler for CJ Mitsubishi Lancer EVO Sedan (2007 - 2017 Models) - Spoilers and Bodykits Australia

Rear Window Roof Spoiler for CJ Mitsubishi Lancer EVO Sedan (2007 - 2017 Models)

$199.00

Rear Window Roof Spoiler for CJ Mitsubishi Lancer EVO Sedan (2007 - 2017 Models) If you're looking for a Rear Window Roof Spoiler for CJ Mitsubishi Lancer EVO Sedan then this is the one for you. Tough look, plus tough construction. Give your car that sleek aftermarket look and make it stand out from the crowd! Rear Window Roof Spoiler for CJ Mitsubishi Lancer EVO Sedan (2007 - 2017 Models) Customise your pride and joy with this sleek & stylish roof spoiler Fits CJ Mitsubishi Lancer EVO Sedan models: Evolution / Ralliart / GSR / LX / Active / ES / SX / VR-X / Black edition Dark translucent black in colour - Dark enough for a near black look but can still easily see through it Made of extremely durable & high quality UV resistant acrylic No need to paint Easy installation - Has 3M double sided tape on back of spoiler for easy attachment to car Supplied with spoiler is: 3M brand double sided tape, prep pads, tube of 3M tape primer & basic installation instructions Please allow 1-3 days for handling BEFORE this item is shipped out to you Super TOUGH look plus increases your cars value Limited Stock - Add to Cart Now! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world! Important note: Prior to fitting this product, ensure your vehicle is thoroughly washed and clean ensuring the mating surface you are fitting the product to is free from any GREASE / WAX / POLISH or any other contaminants. As surface preparation is very important, we recommend the use of a “Wash and Grease Remover” solution to be used on the mating surface as per directions on the solvent bottle you use. Failing to prepare the surface correctly, you risk the possibility of the product not adhering to the surface correctly & coming off. Be sure to sit this spoiler on your car BEFORE trying to stick it to your car. The double sided tape (provided on back of spoiler) and using some sikaflex/urethane (not supplied), can be used to stick the spoiler down. When fitting, apply firm but not excessive pressure or weight. If you are in any way unsure of how to attach this to your vehicle, please get a professional to attach it. We will not be held liable for any fitment issues for how you or anyone else fits this spoiler or the item becoming unattached from your vehicle. Failing to follow these instructions will void any return or refund policy on the product.

Out of Stock

Keyless Ignition Start Switch Knob Cap for CJ / CF Mitsubishi Lancer (2008 - 2017) / Outlander (2007 - 2013)-Spoilers and Bodykits Australia

Keyless Ignition Start Switch Knob Cap for CJ / CF Mitsubishi Lancer (2008 - 2017) / Outlander (2007 - 2013)

$39.00

Keyless Ignition Start Switch Knob Cap for CJ / CF Mitsubishi Lancer (2008 - 2017) / Outlander (2007 - 2013) Replace a worn or broken start/stop switch cap with this direct-fit keyless ignition knob. Designed to match the original part, it restores full control over your engine’s ignition function with simple installation. Keyless Ignition Start Switch Knob Cap for CJ / CF Mitsubishi Lancer (2008 - 2017) / Outlander (2007 - 2013) Brand new aftermarket replacement part Controls ignition start/stop function – designed to match the original factory setup Compatible with part numbers: 4408A167, 4408A031 Made from durable plastic and metal Cap dimensions: 3 x 3.4 cm (1.18" x 1.34") Direct replacement Ready to install - Professional installation recommended (no fitting instructions included) Built tough for long-lasting performance Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Harmonic Balancer for VE / VF Holden Commodore HSV / Statesman WM / WN LS2 / LS3 / L76 / L77 / L98-Spoilers and Bodykits Australia

Harmonic Balancer for VE / VF Holden Commodore HSV / Statesman WM / WN LS2 / LS3 / L76 / L77 / L98

$249.00

Harmonic Balancer for VE / VF Holden Commodore HSV / Statesman WM / WN LS2 / LS3 / L76 / L77 / L98 If you're looking for an aftermarket replacement part for your vehicle then you've come to the right place. Whether your old gear is broken, worn out or you just want to freshen up your ride, this quality part will get the job done. Harmonic Balancer for VE / VF Holden Commodore HSV / Statesman WM / WN LS2 / LS3 / L76 / L77 / L98 Brand new aftermarket replacement part Ready to install Super strong build quality Shipping Australia Wide Note: Please see below for details & all models this item fits Compatibility with other Models: Chevrolet Camaro 2009 - , 6.2L, V8, 16V, OHV, MPFI, 321kW, EngCode: LS3 2010 - , 6.2L, V8, 16V, OHV, MPFI, 302kW, EngCode: L99 Corvette 1997 - 2004, 5.7L, V8, 16V, OHV, MPFI, C5, EngCode: LS1 2007 - 2004, 6.0L, V8, 16V, OHV, MPFI, C6, EngCode: LS2 2014 - , 6.2L, V8, 16V, OHV, MPFI, C7, 339kW, EngCode: LT1 Lumina Aug 2006 - Aug 2010, 6.0L, V8, 16V, OHV, MPFI, VE, EngCode: L98 GEN 4 Holden Berlina Aug 2006 - Jan 2010, 6.0L, V8, 16V, OHV, MPFI, VE, 270kW, EngCode: L98 Calais Aug 2006 - Oct 2008, 6.0L, V8, 16V, OHV, MPFI, VE, 270kW, EngCode: L98 Nov 2008 - Aug 2010, 6.0L, V8, 16V, OHV, MPFI, VE, 260kW, EngCode: L76 Sep 2010 - Apr 2013, 6.0L, V8, 16V, OHV, MPFI, VE II, 260kW, EngCode: L77 May 2013 - Sep 2015, 6.0L, V8, 16V, OHV, MPFI, VF, 260kW, EngCode: L77 Oct 2015 - Oct 2017, 6.2L, V8, 16V, OHV, MPFI, VF, 304kW, EngCode: LS3 Caprice Aug 2006 - Oct 2008, 6.0L, V8, 16V, OHV, MPFI, WM , 270kW, EngCode: L98 Nov 2008 - Aug 2010, 6.0L, V8, 16V, OHV, MPFI, WM , 270kW, EngCode: L76 Sep 2010 - Apr 2013, 6.0L, V8, 16V, OHV, MPFI, WM II, 260kW, EngCode: L77 May 2013 - , 6.0L, V8, 16V, OHV, MPFI, WN, 270kW, EngCode: L77 Commodore Aug 2006 - Aug 2010, 6.0L, V8, 16V, OHV, MPFI, VE, 270kW, EngCode: L98 GEN 4 Sep 2010 - Apr 2013, 6.0L, V8, 16V, OHV, VE, 270kW, EngCode: L77 May 2013 - Sep 2015, 6.0L, V8, 16V, OHV, MPFI, VF, 270kW, EngCode: L77 Oct 2015 - Oct 2017, 6.2L, V8, 16V, OHV, MPFI, VF, 304kW, EngCode: LS3 Statesman Aug 2006 - Aug 2010, 6.0L, V8, 16V, OHV, MPFI, WM , 270kW, EngCode: L98 HSV Clubsport Aug 2006 - Mar 2008, 6.0L, V8, 16V, OHV, MPFI, VE, EngCode: LS2 Apr 2008 - May 2013, 6.2L, V8, 16V, OHV, MPFI, VE, 317kW, EngCode: LS3 Sep 2010 - May 2013, 6.2L, V8, 16V, OHV, MPFI, VE LPG, 317kW, EngCode: LS3 Jun 2013 - Oct 2017, 6.2L, V8, 16V, OHV, MPFI, VF, 317kW, EngCode: LS3 Jun 2013 - Oct 2015, 6.2L, V8, 16V, OHV, MPFI, VF, R8, 325kW, EngCode: LS3 Oct 2014 - Oct 2017, 6.2L, V8, 16V, OHV, MPFI, VF, 325kW, EngCode: LS3 Oct 2016 - Oct 2017, 6.2L, V8, 16V, OHV, MPFI, VF, R8, 340kW, EngCode: LS3 Grange Mar 2007 - Mar 2008, 6.0L, V8, 16V, OHV, MPFI, WM , EngCode: LS2 Apr 2008 - May 2013, 6.2L, V8, 16V, OHV, MPFI, WM , 325kW, EngCode: LS3 Jun 2013 - Feb 2017, 6.2L, V8, 16V, OHV, MPFI, WN, 325kW, EngCode: LS3 GTS Aug 2006 - Mar 2008, 6.0L, V8, 16V, OHV, MPFI, VE, 307kW, EngCode: LS2 Apr 2008 - Aug 2009, 6.2L, V8, 16V, OHV, MPFI, VE, 317KW, EngCode: LS3 Sep 2009 - May 2013, 6.2L, V8, 16V, OHV, MPFI, VE, 325KW, EngCode: LS3 Sep 2010 - May 2013, 6.2L, V8, 16V, OHV, MPFI LPG, VE, 325KW, EngCode: LS3 Maloo Oct 2007 - Mar 2008, 6.0L, V8, 16V, OHV, MPFI, VE, 307kW, EngCode: LS2 Apr 2008 - May 2013, 6.2L, V8, 16V, OHV, MPFI, VE, 317kW, EngCode: LS3 Sep 2010 - May 2013, 6.2L, V8, 16V, OHV, MPFI LPG, VE, 317kW, EngCode: LS3 Jun 2013 - Oct 2015, 6.2L, V8, 16V, OHV, MPFI LPG, VF R8, 325kW, EngCode: LS3 Senator Aug 2007 - Mar 2008, 6.0L, V8, 16V, OHV, MPFI, VE, 307kW, EngCode: LS2 Apr 2008 - May 2013, 6.2L, V8, 16V, OHV, MPFI, VE, 317kW, EngCode: LS3 Package Contents: 1x Harmonic Balancer

Mass Air Flow Sensor Meter for CG / CJ Mitsubishi Lancer / Triton / Pajero / Outlander - Spoilers and Bodykits Australia

Mass Air Flow Sensor Meter for CG / CJ Mitsubishi Lancer / Triton / Pajero / Outlander

$79.00

Mass Air Flow Sensor Meter for CG / CJ Mitsubishi Lancer / Triton / Pajero / Outlander If you're looking for aftermarket parts and accessories for your ride then you've come to the right place. Whether you want to freshen up your ride or your old gear is worn out, this quality part will get the job done. Give your car that aftermarket look and style. Mass Air Flow Sensor Meter for CG / CJ Mitsubishi Lancer / Triton / Pajero / Outlander Brand new aftermarket replacement part With 4 Pins Connector Direct Replacement Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Shipping Australia Wide Compatible with part number(s): MR985187 Note: Please see table below for details & all models this item fits Make Model Series Year Engine Engine Code Body Style Mitsubishi Colt RG 2006-2008 1.5L 4G15T Convertible Mitsubishi Grandis BA 2004-2010 2.4L 4G69 MPV Mitsubishi Lancer CG,CH,CJ 2007-2013 2.0L 4B11 Sedan Mitsubishi Lancer CG,CH,CJ 2005-2008 2.4L 4G69 Sedan Mitsubishi Lancer CJ,CF 2007-2019 2.0L 4B11 Sportback Mitsubishi Outlander CU_W,ZE,ZF 2004-2006 2.4L 4G69 SUV Mitsubishi Outlander ZG,ZH 2006-2012 2.4L 4B12 SUV Mitsubishi Outlander ZG,ZH 2006-2012 3.0L 6B31 SUV Mitsubishi Pajero NS,NT,NW 2006-2013 3.8L 6G75 SUV Mitsubishi Triton ML,MN 2006-2008 3.5L 6G74 (SOHC 24V) Ute Mitsubishi Triton ML,MN 2006-2009 3.5L 6G74 (SOHC 24V) Platform/Chassis

Tail Lights for CE Mitsubishi Lancer EVO 4 / 5 / 6 - Black - Altezza Style (1995 - 2000 Models)

$299.00

Tail Lights for CE Mitsubishi Lancer EVO 4 / 5 / 6 - Black - Altezza Style (1995 - 2000 Models) If you're looking for a set of Tail Lights for CE Mitsubishi Lancer EVO 4 / 5 / 6 in Altezza Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Tail Lights for CE Mitsubishi Lancer EVO 4 / 5 / 6 - Black - Altezza Style (1995 - 2000 Models) Give the rear of your Lancer a whole new look with these TOUGH looking tail lights! Top quality plastic aftermarket tail lights Fits 1995-2000 CE Mitsubishi Lancer EVO 4 / 5 / 6 models Supplied as a pair (Left & Right) Clear outer lens & black inner background Uses your factory wiring & globes Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Tough look plus increases your cars value Limited Stock - Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Rear Bumper Bar Skirt Lip for CE Mitsubishi Lancer Coupe / Sedan - EVO 4 / 6 Style - Spoilers and Bodykits Australia

Rear Bumper Bar Skirt Lip for CE Mitsubishi Lancer Coupe / Sedan - EVO 5 / 6 Style

$469.00

Rear Skirt Lip for CE Mitsubishi Lancer Coupe / Sedan - EVO 5 / 6 Style If you're looking for a Rear Skirt Lip for CE Mitsubishi Lancer Coupe / Sedan in EVO 5 / 6 Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Rear Skirt Lip for CE Mitsubishi Lancer Coupe / Sedan - EVO 5 / 6 Style Give your Lancer a whole new look with this TOUGH looking rear bumper bar skirt! Fits standard sedan Lancer rear only 100% Australian made Meant to be attached to bottom of standard rear bumper bar with urethane & small screws This product is made to order - Please see above for approx build time Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW!

Out of Stock

Weather Shields for Mitsubishi Lancer CJ / CF Sportback Wagon (2008 - 2017 Models) - Spoilers and Bodykits Australia

Weather Shields for Mitsubishi Lancer CJ / CF Sportback Wagon (2008 - 2017 Models)

$119.00

Weather Shields for Mitsubishi Lancer CJ / CF Sportback Wagon (2008 - 2017 Models) *** NOTE: If the year model of your car is made in the beginning or ending year as what is listed for this model, then contact us BEFORE purchasing, as your car model may have changed during that year which may make these not fit (We need to know exact month & year of build date) *** If you're looking for a set of Weather Shields for Mitsubishi Lancer CJ / CF Sportback Wagon then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Weather Shields for Mitsubishi Lancer CJ / CF Sportback Wagon (2008 - 2017 Models) Supplied as a set of 4 Fits ES / LS / LX / Ralliart / Evolution / Platinum / Active / GSR / VR / VR-X / CJ CF models High quality translucent black perspex plastic (These are NOT solid black in colour) Darkly tinted black yet extremely easy to see through Highly resistant to cracking and discolouring in the sunlight Ready to fit - Comes with 3M double sided tape on back of weather shields for easy installation Supplied with basic installation instructions Heavy duty UV resistant Reduces harsh sunlight and wind noise Minimises heat inside car when parked Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Rear Boot Lip Spoiler for Mitsubishi CH Lancer 4 Door Sedan - Spoilers and Bodykits Australia

Rear Boot Lip Spoiler for Mitsubishi CH Lancer 4 Door Sedan

$119.00

Rear Boot Lip Spoiler for Mitsubishi CH Lancer 4 Door Sedan If you're looking for a Rear Boot Lip Spoiler for Mitsubishi CH Lancer 4 Door Sedan then this is the one for you. Tough look, plus tough construction. Give your car that sleek aftermarket look and make it stand out from the crowd! Rear Boot Lip Spoiler for Mitsubishi CH Lancer 4 Door Sedan Add that extra touch to your car with this sleek boot lip spoiler Made of tough polyurethane - Because of the pliable, flexible material, this spoiler can be curved to fit your car easily Matt black in colour (Unpainted non-glossy finish) Has 3M double sided tape on back of spoiler - See Important Note Below PLEASE NOTE: This spoiler may come in a tube or rolled up in a package (Depends on your location). Because of the flexible material of this spoiler, this does NOT affect its final shape. Heating this spoiler up in the sun or with a heat gun or similar will allow this spoiler to mould to many different shapes. Please allow 1-3 days for handling BEFORE this item is shipped out to you Tough look plus increases your cars value Limited Stock - Add to Cart Now! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world! Important note: Prior to fitting this product, ensure your vehicle is thoroughly washed and clean ensuring the mating surface you are fitting the product to is free from any GREASE / WAX / POLISH or any other contaminants. As surface preparation is very important, we recommend the use of a “Wash and Grease Remover” solution to be used on the mating surface as per directions on the solvent bottle you use. Failing to prepare the surface correctly, you risk the possibility of the product not adhering to the surface correctly & coming off. Be sure to sit this spoiler on your car BEFORE trying to stick it to your car. DO NOT panic when you receive this spoiler thinking it is not the exact shape of your car. These spoilers are made to mould to all different shapes. So you must heat this item up out in the sun, with a heat gun or hair dryer which will make it nicely pliable to mould to the shape of your car. The double sided tape (provided on back of spoiler) and using some sikaflex/urethane (not supplied), can be used to stick the spoiler down. We also recommend screwing it down. When fitting, apply firm but not excessive pressure or weight. If you are in any way unsure of how to attach this to your vehicle, please get a professional to attach it. We will not be held liable for any fitment issues for how you or anyone else fits this spoiler or the item becoming unattached from your vehicle. Failing to follow these instructions will void any return or refund policy on the product.

Rear Boot Lip Spoiler for Mitsubishi CE Lancer Coupe (1996 - 2003 Models) - Spoilers and Bodykits Australia

Rear Boot Lip Spoiler for Mitsubishi CE Lancer Coupe (1996 - 2003 Models)

$119.00

Rear Boot Lip Spoiler for Mitsubishi CE Lancer Coupe (1996 - 2003 Models) If you're looking for a Rear Boot Lip Spoiler for Mitsubishi CE Lancer Coupe then this is the one for you. Tough look, plus tough construction. Give your car that sleek aftermarket look and make it stand out from the crowd! Rear Boot Lip Spoiler for Mitsubishi CE Lancer Coupe (1996 - 2003 Models) Add that extra touch to your car with this sleek boot lip spoiler Made of tough polyurethane - Because of the pliable, flexible material, this spoiler can be curved to fit your car easily Matt black in colour (Unpainted non-glossy finish) Has 3M double sided tape on back of spoiler - See Important Note Below PLEASE NOTE: This spoiler may come in a tube or rolled up in a package (Depends on your location). Because of the flexible material of this spoiler, this does NOT affect its final shape. Heating this spoiler up in the sun or with a heat gun or similar will allow this spoiler to mould to many different shapes. Please allow 1-3 days for handling BEFORE this item is shipped out to you Tough look plus increases your cars value Limited Stock - Add to Cart Now! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world! Important note: Prior to fitting this product, ensure your vehicle is thoroughly washed and clean ensuring the mating surface you are fitting the product to is free from any GREASE / WAX / POLISH or any other contaminants. As surface preparation is very important, we recommend the use of a “Wash and Grease Remover” solution to be used on the mating surface as per directions on the solvent bottle you use. Failing to prepare the surface correctly, you risk the possibility of the product not adhering to the surface correctly & coming off. Be sure to sit this spoiler on your car BEFORE trying to stick it to your car. DO NOT panic when you receive this spoiler thinking it is not the exact shape of your car. These spoilers are made to mould to all different shapes. So you must heat this item up out in the sun, with a heat gun or hair dryer which will make it nicely pliable to mould to the shape of your car. The double sided tape (provided on back of spoiler) and using some sikaflex/urethane (not supplied), can be used to stick the spoiler down. We also recommend screwing it down. When fitting, apply firm but not excessive pressure or weight. If you are in any way unsure of how to attach this to your vehicle, please get a professional to attach it. We will not be held liable for any fitment issues for how you or anyone else fits this spoiler or the item becoming unattached from your vehicle. Failing to follow these instructions will void any return or refund policy on the product.

Oxygen Sensor for Mitsubishi Lancer EVO 8 - Pre-Cat (2004 - 2005) - Spoilers and Bodykits Australia

Oxygen Sensor for Mitsubishi Lancer EVO 8 - Pre-Cat (2004 - 2005)

$69.00

Oxygen Sensor for Mitsubishi Lancer EVO 8 - Pre-Cat (2004 - 2005) If you're looking for aftermarket parts and accessories for your ride then you've come to the right place. Whether you want to freshen up your ride or your old gear is worn out, this quality part will get the job done. Give your car that aftermarket look and style. Oxygen Sensor for Mitsubishi Lancer EVO 8 - Pre-Cat (2004 - 2005) Brand new aftermarket replacement part Direct Replacement 4 Connector Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Shipping Australia Wide Compatible with part number(s): 250-24631 Make Model Series Year Engine Engine Code Location Mitsubishi Lancer EVO VIII 01/2004-07/2005 I4 2.0L 4G63T Pre-Cat Sensor Mitsubishi Pajero NP 06/2005-09/2006 V6 3.8L 6G75 Pre-Cat Sensor Left only Mitsubishi Pajero NS 10/2006-12/2008 V6 3.8L 6G75 2x Pre-Cat Sensor

Front Lip for Mitsubishi Lancer EVO 8 (2003 - 2005 Models) - Spoilers and Bodykits Australia

Front Lip for Mitsubishi Lancer EVO 8 (2003 - 2005 Models)

$339.00

Front Lip for Mitsubishi Lancer EVO 8 (2003 - 2005 Models) If you're looking for a Front Lip for Mitsubishi Lancer EVO 8 then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Front Lip for Mitsubishi Lancer EVO 8 (2003 - 2005 Models) This front lip attaches to the bottom of your original front bar Super tough Poly-Urethane construction Matt black in colour Front lip can be painted or left as is Supplied with all screws needed to fit Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

Front Bumper Bar for CJ Mitsubishi Lancer - EVO Style (Sedan & Sports Wagon Only)

$719.00

Front Bar for CJ Mitsubishi Lancer - EVO Style (Only Fits CJ Sedans & Sports Wagon) *** Please NOTE! This bar ONLY fits a standard Lancer. It does NOT fit an EVO *** If you're looking for a Front Bar for CJ Mitsubishi Lancer EVO Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Front Bar for CJ Mitsubishi Lancer EVO Style (Only Fits CJ Sedans and Sports Wagon) Give your Lancer a whole new look with this TOUGH looking front bumper bar! NOTE: This bar is made to fit a STANDARD Lancer, not an EVO Can be made to fit either a Sedan or Sports Wagon - Please choose which you want above when ordering 100% Australian made This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Front Bumper Bar for CE Mitsubishi Lancer Coupe - EVO 4 Style

$719.00

Front Bumper Bar for CE Mitsubishi Lancer Coupe - EVO 4 Style *** Fits 2 Door Coupes Only *** If you're looking for a Front Bumper Bar for CE Mitsubishi Lancer Coupe in EVO 4 Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Front Bumper Bar for CE Mitsubishi Lancer Coupe - EVO 4 Style Give your car's front end a whole new look with this tough looking front bumper bar! Will ONLY fit 2-door coupe models 100% Australian made Not supplied with driving lights or mesh that goes behind openings This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW

Left Passenger Side Door Mirror with Indicator for Mitsubishi Lancer CJ / CF - 5 Pins (2014 - 2017)-Spoilers and Bodykits Australia

Left Passenger Side Door Mirror with Indicator for Mitsubishi Lancer CJ / CF - 5 Pins (2014 - 2017)

$219.00

Left Passenger Side Door Mirror with Indicator for Mitsubishi Lancer CJ / CF - 5 Pins (2014 - 2017) Looking for a reliable aftermarket replacement part for your vehicle? You've come to the right place. Whether your existing component is damaged, showing signs of wear, or you’re simply looking to upgrade your ride, this high quality part is designed to deliver performance and durability you can count on. Left Passenger Side Door Mirror with Indicator for Mitsubishi Lancer CJ / CF - 5 Pins (2014 - 2017) Brand new aftermarket part Black finish Ready to install No fitting instructions provided - A qualified licensed professional is recommended for installation Strong build quality Shipping Australia Wide

Air Conditioning Blower Motor Resistor for Mitsubishi Lancer CJ / CY (2009 - 2014) / Outlander (2007 - 2013) - Spoilers and Bodykits Australia

Air Conditioning Blower Motor Resistor for Mitsubishi Lancer CJ / CY (2009 - 2014) / Outlander (2007 - 2013)

$49.00

Air Conditioning Blower Motor Resistor for Mitsubishi Lancer CJ / CY (2009 - 2014) / Outlander (2007 - 2013) If you're looking for aftermarket parts and accessories for your ride then you've come to the right place. Whether you want to freshen up your ride or your old gear is worn out, this quality part will get the job done. Give your car that aftermarket look and style. Air Conditioning Blower Motor Resistor for Mitsubishi Lancer CJ / CY (2009 - 2014) / Outlander (2007 - 2013) Brand new aftermarket replacement part For vehicles with automatic climate control Direct Replacement With 3 Pins Connector Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Shipping Australia Wide Compatible with part number(s): RU-691, 4P1685, 7802A006 Note: Please see table below for details & all models this item fits Make Model Year Engine Body Style Mitsubishi Lancer 2009-2014 All Sedan Mitsubishi Lancer 2009-2014 All Hatchback Mitsubishi Lancer 2010-2011 All Station Wagon Mitsubishi Lancer 2009-2014 All Sedan Mitsubishi Lancer 2009-2014 All Hatchback Mitsubishi Lancer 2010-2011 All Station Wagon Mitsubishi Outlander 2008-2013 All Sport Utility Mitsubishi Outlander 2007-2013 All Sport Utility

Oxygen Sensor for CH Mitsubishi Lancer & EVO 7 - Pre-Cat or Post-Cat - Spoilers and Bodykits Australia

Oxygen Sensor for CH Mitsubishi Lancer & EVO 7 - Pre-Cat or Post-Cat

$59.00

Oxygen Sensor for CH Mitsubishi Lancer & EVO 7 - Pre-Cat or Post-Cat If you're looking for aftermarket parts and accessories for your ride then you've come to the right place. Whether you want to freshen up your ride or your old gear is worn out, this quality part will get the job done. Give your car that aftermarket look and style. Oxygen Sensor for CH Mitsubishi Lancer & EVO 7 - Pre-Cat or Post-Cat Brand new aftermarket replacement part Direct Replacement 4 Connector Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Shipping Australia Wide Make Model Series Years Engine Engine Code Location Mitsubishi Galant HJ 12/1992-11/1994 2.0L 6A12 Pre-Cat Sensor Mitsubishi Lancer EVO VII 12/2000-11/2001 2.0LTurbo 4G63T Post-Cat Sensor Mitsubishi Lancer EVO VII 12/2001-12/2003 2.0LTurbo 4G63T Post-Cat Sensor Mitsubishi Lancer CH 8/2003-11/2005 2.0L 4G94 Pre-Cat Sensor Mitsubishi Lancer CH 8/2005-2007 2.4L 4G69 Post-Cat Sensor

1 2 3

Fast Local Dispatch

Tracked Shipping on Every Order

Easy 30 Day Returns

Free Returns on Faulty Items

CONTACT

Mon-Fri | 9am-5pm

✔ 28,000+ Orders Shipped Australia-Wide

✔ Serving Aussie Drivers since 2016

✔ Aussie-Owned & Operated

CATEGORIES Bodykit Parts Accessories Lighting Suspension Parts Steering Parts Engine Bay Parts Interior Parts Intake & Exhaust Parts Drivetrain Parts Body Parts Fuel System Parts Brake Parts Electrical Parts Climate Control Parts

INFO & SUPPORT FAQs Shipping & Delivery Returns & Refunds Basic Fitting Guides Contact Us About Us Why Choose Us Reviews Bundle Deals Buy Now Pay Later Earn Rewards Terms & Conditions Privacy Policy

GET SOCIAL Follow us on Facebook