VN / VP / VG – Spoilers and Bodykits

Weather Shields for VN / VP / VR / VS Holden Commodore Ute / Sedan / Wagon (Clip On Style) - Spoilers and Bodykits Australia

Weather Shields for VN / VP / VR / VS Holden Commodore Ute / Sedan / Wagon (Clip On Style)

$127.00 $165.00

Weather Shields for VN / VP / VR / VS Holden Commodore Ute / Sedan / Wagon (Clip On Style) If you're looking for a set of Weather Shields for VN / VP / VR / VS Holden Commodore Ute / Sedan / Wagon then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Weather Shields for VN / VP / VR / VS Holden Commodore Ute / Sedan / Wagon (Clip On Style) Supplied as a set of 2 (For Left & Right front doors) NOTE: These weather shields are a clip on style with brackets Fits all HSV / Clubsport / Acclaim / Berlina / Executive / S / SS / Vacationer / Olympic High quality translucent black perspex plastic (These are NOT solid black in colour) Darkly tinted black yet extremely easy to see through Highly resistant to cracking and discolouring in the sunlight Ready to fit - Supplied with basic installation instructions Heavy duty UV resistant Reduces harsh sunlight and wind noise Minimises heat inside car when parked Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

-15% sale

LED Brake Light for VP SS Holden Commodore Rear Spoiler (395mm Length) (Red) - Spoilers and Bodykits Australia

LED Brake Light for VP SS Holden Commodore Rear Spoiler (395mm Length) (Red)

$159.00 $185.00

LED Brake Light for VP SS Holden Commodore Rear Spoiler (395mm Length) (Red) *** NOTE: This tail light can fit numerous other spoilers and lights. See pictures for measurements *** If you're looking for a LED Rear Brake Light for VP SS Holden Commodore Spoiler then this is the one for you. Tough look, plus tough construction, give your car that aftermarket look and style. LED Brake Light for VP SS Holden Commodore Rear Spoiler (395mm Length) (Fits Many Other Models) NOTE: Please check the above pictures for the measurements of this light to make sure it is the same as the one you need (Contact us with a photo and measurements of your light if you're unsure) Can be used on numerous other spoilers Red lens and lights up red Measures approx: Length 395mm Ready to fit Super strong build quality Limited Stock - Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

-6% sale

Infill Panels for VG / VP / VR / VS Holden Commodore Ute Tray / Tub - Spoilers and Bodykits Australia

Infill Panels for VG / VP / VR / VS Holden Commodore Ute Tray Tub

$469.00 $495.00

Infill Panels for VG / VP / VR / VS Holden Commodore Ute Tray Tub If you're looking for 100% Australian made Infill Panels for VG / VP / VR / VS Holden Commodore Ute Tray / Tub then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Infill Panels for VG / VP / VR / VS Holden Commodore Ute Tray Tub Polish off your ute rear tub with these sleek looking infill panels! Covers up the whole sides & rear where all the tie down points are for a smooth look on the rear tub Supplied as 2x side pieces and 1x rear piece (Also available separately - Contact us for this) 100% Australian made Each piece has duvets in them where you drill and bolt them to the car using the original bolts off car This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

-15% sale

Front Bumper Bar Lip for VN / VP Holden Commodore - SS Style - Spoilers and Bodykits Australia

Front Bumper Bar Lip for VP Holden Commodore - SS Style

$399.00 $465.00

Front Bumper Bar Lip for VP Holden Commodore - SS Style If you're looking for 100% Australian made Front Bumper Bar Lip for VP Holden Commodore in SS Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Front Bumper Bar Lip for VP Holden Commodore - SS Style Polish off the front end of your VP Commodore with this sleek looking front bumper bar lip! Meant to be attached to the bottom of the standard front bumper bar with urethane & small screws 100% Australian made NOTE: VN & VP SS style front lips are different between the two models and are NOT interchangeable (To see front lip for VN models, see other listing) This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

-13% sale

Front Grill for VP Holden Commodore - Single Slot

$319.00 $365.00

Front Grill for VP Holden Commodore - Single Slot If you're looking for a Front Grill for VP Holden Commodore then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Front Grill for VP Holden Commodore - Single Slot Replace the ugly standard grill with this single slot grill! Fits ONLY onto a VP Commodore with a Senator or GTS type front bar Straight swap over 100% Australian made This product is made to order - Please see above for approx build time Full fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

-15% sale

Twin Vent Bonnet Scoop - Universal Design to Fit Most Bonnets

$319.00 $375.00

Twin Vent Bonnet Scoop - Universal Design to Fit Most Bonnets If you're looking for a Twin Vent Bonnet Scoop to Fit Most Bonnets then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Twin Vent Bonnet Scoop - Universal Design to Fit Most Bonnets Give your car's front end a whole new look with this TOUGH looking bonnet scoop! 100% Australian made Can be made to fit pretty much any model bonnet with some modification - Can use Sikaflex/Urethane to fill any small gaps (We've had customers fit these on Hilux's, VS Commodores and many more) Length: 70cm, Width: 67cm, Vent width: 55cm, Height: Approx 6cm Meant to be attached with urethane & small screws This product is made to order - Please see above for approx build time Full fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

-14% sale

Side Skirts for VR / VS Holden Commodore (Sedan & Wagon Available) - Spoilers and Bodykits Australia

Side Skirts for VN / VP / VR / VS Holden Commodore Sedan

$599.00 $695.00

Side Skirts for VN / VP / VR / VS Holden Commodore Sedan If you're looking for Side Skirts for VN / VP / VR / VS Holden Commodore Sedan then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Side Skirts for VN / VP / VR / VS Holden Commodore Sedan Give your Commodore a new look with these tough looking side skirts! 100% Australian made Supplied as a pair (Can also be bought singularly - Contact us for this) Each side skirt is a one piece design These skirts do not have an indentation for a badge Meant to be attached with urethane & small screws This product is made to order - Please see above for approx build time Custom designed to suit this model Full fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

-14% sale

Lower Lip Bodykit for VN / VP Holden Commodore Sedan - SS Style - Spoilers And Bodykits Australia

Lower Lip Bodykit for VN / VP Holden Commodore Sedan - SS Style

$1,419.00 $1,635.00

Lower Lip Bodykit for VN / VP Holden Commodore Sedan - SS Style *** NOTE: Please choose correct option above as to what model car you have; VN or VP (As the front & rear lips are different between the two models and are NOT interchangeable) *** This Lip Bodykit includes: Front Lower Lip Rear Lower Lip (One piece lip) Side Skirts (Pair - One piece skirts) If you're looking for a 100% Australian made Lower Lip Bodykit for VN / VP Holden Commodore Sedan in SS Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Lower Lip Bodykit for VN / VP Holden Commodore Sedan - SS Style Give your VN or VP a whole new sleek look with this lower lip bodykit! NOTE: Please choose correct option above as to what model car you have; VN or VP (As the front & rear lips are different between the two models and are NOT interchangable) Front and rear skirts attach to the bottom of your original bumpers - Use urethane and small screws to attach (Attach side skirts like this also) 100% Australian made This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

-8% sale

Guard Ticks for VN / VG / VP Holden Commodore - VN Group A Style - Spoilers and Bodykits Australia

Guard Flare Ticks for VN / VG / VP Holden Commodore - VN Group A Style (PAIR)

$199.00 $215.00

Guard Flare Ticks for VN / VG / VP Holden Commodore - VN Group A Style If you're looking for Guard Flare Ticks for VN / VG / VP Holden Commodore in VN Group A Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Guard Flare Ticks for VN / VG / VP Holden Commodore - VN Group A StyleAdd that extra touch to the guards on your Commodore with these sleek looking guard flare ticks! 100% Australian made Supplied as a pair for the front wheel arches (Also available separately) Meant to be stuck to the guards with urethane This product is made to order - Please see above for approx build time Full fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

-14% sale

Bonnet Scoop for VN / VG / VP Holden Commodore - VN Group A Style - Spoilers and Bodykits Australia

Bonnet Scoop for VN / VG / VP Holden Commodore - VN Group A Style

$359.00 $415.00

Bonnet Scoop for VN / VG / VP Holden Commodore - VN Group A Style If you're looking for a Bonnet Scoop for VN / VG / VP Holden Commodore in VN Group A Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet Scoop for VN / VG / VP Holden Commodore - VN Group A Style Give your Commodore a whole new look with this tough looking bonnet scoop! 100% Australian made This scoop is fully enclosed (Does not have any vents/openings) Can fit many different style bonnets with the same curve Has inserts in flange on underneath of scoop for mounting - Recommended to use urethane for an additional strong bond also This product is made to order - Please see above for approx build time Full fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

-17% sale