Products – Page 246 – Spoilers and Bodykits

Coilover Lowering Kit for Honda Accord CM4 / CM5 / CM6 Sedan (2003 - 2007)-Spoilers and Bodykits Australia

Coilover Lowering Kit for Honda Accord CM4 / CM5 / CM6 Sedan (2003 - 2007)

$569.00

Coilover Lowering Kit for Honda Accord CM4 / CM5 / CM6 Sedan (2003 - 2007) Lower your Accord’s stance and sharpen its handling with this coilover lowering kit. Designed for a mix of comfort and performance, it allows ride height adjustment while maintaining reliable everyday drivability. Coilover Lowering Kit for Honda Accord CM4 / CM5 / CM6 Sedan (2003 - 2007) Brand new aftermarket replacement part Adjustable ride height: 1" – 3" lowering range Front pillow ball top mounts for improved steering response and stability Spring preload adjustment: 7–10 mm Spring rates: Front 10 kg/mm (560 lbs/in), Rear 6 kg/mm (336 lbs/in) Twin-tube shock design for smooth and consistent damping Height can be adjusted while installed without affecting damper stroke Complete kit includes 2 front and 2 rear coilovers, plus adjustment tools Fully rebuildable for long-term serviceability High tensile performance springs tested over 600,000 cycles with less than 0.04% distortion Finished in blue for a premium look Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: Honda Accord VII 4-door Sedan (CM4/CM5/CM6) 2003-2007 Honda Accord VII 2-door Coupe (CM7/CM8) 2003-2007 Honda Inspire 2003-2007 (Japan market only)

Coilover Lowering Kit for Subaru Impreza WRX Sedan / Hatchback (2002 - 2007)-Spoilers and Bodykits Australia

Coilover Lowering Kit for Subaru Impreza WRX Sedan / Hatchback (2002 - 2007)

$689.00

Coilover Lowering Kit for Subaru Impreza WRX Sedan / Hatchback (2002 - 2007) Improve the stance and handling of your WRX with this coilover lowering kit. Designed for a balance of comfort and performance, it provides adjustable ride height and camber for precise setup. Coilover Lowering Kit for Subaru Impreza WRX Sedan / Hatchback (2002 - 2007) Brand new aftermarket replacement part Adjustable ride height for a lower centre of gravity and aggressive stance Front camber plates with pillow ball top mounts for sharper steering response and alignment adjustment Non-adjustable dampers, set for reliable everyday performance Adjustable spring preload for fine-tuned balance Spring rates: Front 8 kg/mm (448 lbs/in), Rear 7 kg/mm (392 lbs/in) Made from 6061 aluminium with T6 treatment for strength and reduced weight High tensile performance springs tested over 600,000 cycles with less than 0.04% distortion Rubber boots fitted to protect dampers from dirt and debris Includes 2 front coilovers, 2 rear coilovers, and spanner wrenches for adjustment Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: Impreza WRX Sedan/Hatchback 2008-2014 Impreza WRX Limited Sedan/Hatchback 2008-2014 Impreza WRX Premium Sedan/Hatchback 2008-2014

Coilover Lowering Kit for Subaru Impreza GDA / GD9 / GGA (2000 - 2007) & Saab 9-2X (2005 - 2007)-Spoilers and Bodykits Australia

Coilover Lowering Kit for Subaru Impreza GDA / GD9 / GGA (2000 - 2007) & Saab 9-2X (2005 - 2007)

$619.00

Coilover Lowering Kit for Subaru Impreza GDA / GD9 / GGA (2000 - 2007) & Saab 9-2X (2005 - 2007) Take control of your Subaru or Saab’s suspension with this adjustable coilover lowering kit. Designed to improve handling, stance, and steering response, it offers reliable performance for both daily driving and spirited use. Coilover Lowering Kit for Subaru Impreza GDA / GD9 / GGA (2000 - 2007) & Saab 9-2X (2005 - 2007) Brand new aftermarket replacement part Adjustable ride height: 1" – 3" lowering range Front pillow ball top mounts with camber plates for sharper steering response and alignment adjustment Rear pillow ball top mounts for added stability Spring preload adjustment: 7–10 mm Spring rates: Front 9 kg/mm (504 lbs/in), Rear 7 kg/mm (392 lbs/in) Twin-tube shock design for consistent damping and durability Height can be adjusted while installed without affecting damper stroke Complete kit includes 2 front coilovers, 2 rear coilovers, and adjustment tools Fully rebuildable for long-term serviceability High tensile performance springs tested over 600,000 cycles with less than 0.04% distortion Finished in blue for a premium look Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: SUBARU Impreza WRX 2000.08–2007.06 (GDA, GD9, GGA) SUBARU Impreza WRX STI 2000.10–2004.06 (GDB, Rim P.C.D. = 100) SUBARU Forester SG 2003–2008 SAAB 9-2X 2005–2007 (GGA, GGE)

Coilover Lowering Kit for Nissan Silvia S13 / 180SX / 200SX / 240SX - Adjustable (1989 - 1994)-Spoilers and Bodykits Australia

Coilover Lowering Kit for Nissan Silvia S13 / 180SX / 200SX / 240SX - Adjustable (1989 - 1994)

$559.00

Coilover Lowering Kit for Nissan Silvia S13 / 180SX / 200SX / 240SX - Adjustable (1989 - 1994) Upgrade your S13 suspension with this adjustable coilover lowering kit, designed to improve handling, stance, and steering response. Perfect for both daily driving and spirited use, it offers a balance of comfort and performance. Coilover Lowering Kit for Nissan Silvia S13 / 180SX / 200SX / 240SX - Adjustable (1989 - 1994) Brand new aftermarket replacement part Adjustable ride height: 1" – 3" lowering range Front pillow ball top mounts with camber plates for sharper steering response and alignment adjustment Rear standard rubber top mounts for a smoother, more forgiving ride Spring preload adjustment: 7–10 mm Spring rates: Front 8 kg/mm (448 lbs/in), Rear 7 kg/mm (392 lbs/in) Twin-tube shock design for reliable damping and consistent ride quality Height can be adjusted on the car without affecting damper stroke Complete kit includes 4 shocks, 4 springs, and adjustment tools Fully rebuildable for long-term serviceability High tensile performance springs tested over 600,000 cycles with less than 0.04% distortion Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: Nissan S13 240SX 1989-1994 (USA) Nissan S13 200SX 1989-1993 (Europe) Nissan S13 Silvia 1988-1993 (Japan) Nissan S13 180SX 1989-1999 (Japan) Nissan S13 Sileighty 1998 (Japan)

Coilover Lowering Kit for BMW 3 Series E90 / E91 (2006 - 2013)-Spoilers and Bodykits Australia

Coilover Lowering Kit for BMW 3 Series E90 / E91 (2006 - 2013)

$629.00

Coilover Lowering Kit for BMW 3 Series E90 / E91 (2006 - 2013) Give your BMW 3 Series a sharper stance and improved handling with this adjustable coilover lowering kit. Designed for a balance of comfort and performance, it allows ride height tuning while maintaining reliable shock performance. Coilover Lowering Kit for BMW 3 Series E90 / E91 (2006 - 2013) Brand new aftermarket replacement part Adjustable ride height: 1" – 3" lowering range Front pillow ball top mounts for improved steering response and reduced noise Rear installation requires reuse of OE top mounts Spring preload adjustment: 7–10 mm Spring rates: Front 10 kg/mm (560 lbs/in), Rear 8 kg/mm (448 lbs/in) Twin-tube shock design for efficient damping and consistent ride quality Height can be adjusted without removing coilovers from the car Non-adjustable dampers – set for balanced comfort and handling High tensile performance springs tested over 600,000 cycles with less than 0.04% distortion Includes adjustment wrenches for easy setup Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Out of Stock

Coilover Lowering Kit for Honda Civic EK - Adjustable (1996 - 2000)-Spoilers and Bodykits Australia

Coilover Lowering Kit for Honda Civic EK - Adjustable (1996 - 2000)

$589.00

Coilover Lowering Kit for Honda Civic EK - Adjustable (1996 - 2000) Improve the stance and handling of your Honda Civic EK with this adjustable coilover kit. Offering ride height control and precision-tuned springs, it provides a balance of comfort and performance for everyday driving and spirited use. Coilover Lowering Kit for Honda Civic EK - Adjustable (1996 - 2000) Brand new aftermarket replacement part Complete set includes 2x front and 2x rear coilovers with adjustment wrenches Adjustable ride height: 1" – 3" lowering range Spring rates: 8kg/mm (front), 5kg/mm (rear) Coilover lengths: front 365–410mm, rear 435–480mm Twin tube shock design with preload adjustment range of 7–10mm Standard rubber top mounts front and rear for a smooth, forgiving ride Separate height adjustment that does not affect damper stroke Can be adjusted while fitted to the vehicle High-tensile springs tested to 600,000 cycles with less than 0.04% distortion Gold body with black springs for a sport-inspired look Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: Honda Civic EC ED EE EF Rear Fork Type Bracket Model Only (EC8, EC9, ED2-ED7, EE1-EE5, EE9, EF1-EF5, EF9) (1988-1991) Honda CR-X ED EE EF Rear Fork Type Bracket Model Only (ED8, ED9, EE6, EE8, EF6-EF8) (1988-1991) Honda Civic EG EH EJ Rear Fork Type Bracket Model Only (EG3-EG9, EH1-EH5, EH8, EH9, EJ1-EJ3) (1992-1995) Honda CR-X del Sol EG1 Rear Fork Type Bracket Model Only (1992-1995) Honda Civic EJ EK EM Rear Fork Type Bracket Model Only (EJ5-EJ9, EK1-EK5, EK8, EK9, EM1) (1996-2000) Acura Integra DA DB Rear Fork Type Bracket Model Only (1990-1993) Acura Integra DC2 DC4 Rear Fork Type Bracket Model Only (1994-2001)

Front Coilover Lowering Struts for VT / VX / VY / VZ Holden Commodore-Spoilers and Bodykits Australia

Front Coilover Lowering Struts for VT / VX / VY / VZ Holden Commodore

$779.00

Front Coilover Lowering Struts for VT / VX / VY / VZ Holden Commodore Upgrade the front suspension of your Commodore with these height-adjustable coilover struts. Designed for improved stance and handling, they provide a balance of comfort and performance for street use and spirited driving. Front Coilover Lowering Struts for VT / VX / VY / VZ Holden Commodore Brand new aftermarket replacement part Adjustable ride height: 1" – 3" lowering range Requires reuse of OE top mounts (no top mounts included) Spring preload adjustment: 7–10 mm Front spring rate: 7 kg/mm (392 lbs/in) Twin-tube shock design for consistent performance and improved efficiency Height can be adjusted while installed without affecting damper stroke High tensile performance springs tested over 600,000 cycles with less than 0.04% distortion Gold body with black spring finish Includes adjustment spanners for easy setup Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: Holden Commodore Third Generation 1997-2007 Holden Commodore VT / VT II Sedan/Wagon 1997-2000 Holden VX Commodore Berlina/Calais Sedan/Wagon 2000-2002 Holden VY Commodore Sedan/Wagon 2002-2004 Holden VZ Commodore Sedan/Wagon 2004-2007

Coilover Lowering Kit for VE Holden Commodore Sedan / Wagon / Ute (2006 - 2013)-Spoilers and Bodykits Australia

Coilover Lowering Kit for VE Holden Commodore Sedan / Wagon / Ute (2006 - 2013)

$619.00

Coilover Lowering Kit for VE Holden Commodore Sedan / Wagon / Ute (2006 - 2013) Give your VE Commodore the perfect balance of stance and performance with this adjustable coilover lowering kit. Designed to improve handling and appearance, it offers ride height adjustability along with durable construction for everyday driving or spirited use. Coilover Lowering Kit for VE Holden Commodore Sedan / Wagon / Ute (2006 - 2013) Brand new aftermarket replacement part Adjustable ride height: 1" – 3" lowering range for a lower centre of gravity and aggressive stance Twin-tube shock design for consistent performance across different road conditions Requires factory OE top mounts (front and rear) for installation Spring preload adjustment: 7–10 mm Spring rates: Front 7 kg/mm (392 lbs/in), Rear 11 kg/mm (616 lbs/in) Spring lengths: Front 200 mm, Rear 185 mm Coilover lengths: Front 430–510 mm, Rear 405–445 mm CNC-machined aluminium top mounts and lockers for strength and weight savings Heavy-duty steel lower mounts for long-lasting durability High tensile performance springs tested over 600,000 cycles for proven reliability Long rubber boots included to protect dampers from dirt and debris Corrosion-resistant finish with anodised aluminium and powder-coated carbon steel parts Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: Holden Commodore VE Sedan 2006-2013 Holden Commodore VE Wagon 2008-2013 Holden Commodore VE Ute 2007-2013

Coilover Lowering Kit for Subaru Impreza GDB / GG - Adjustable Height (2000 - 2007)-Spoilers and Bodykits Australia

Coilover Lowering Kit for Subaru Impreza GDB / GG - Adjustable Height (2000 - 2007)

$769.00

Coilover Lowering Kit for Subaru Impreza GDB / GG - Adjustable Height (2000 - 2007) Give your Subaru Impreza a sharper stance and improved handling with this adjustable coilover kit. Designed for street use, it offers ride height adjustment and front camber plates to fine-tune steering response and alignment. Coilover Lowering Kit for Subaru Impreza GDB / GG - Adjustable Height (2000 - 2007) Brand new aftermarket replacement part Complete set includes 2x front and 2x rear coilovers with adjustment tools Adjustable ride height: 1" – 3" lowering range Front camber plate top mounts for improved steering precision and alignment control Pillow ball top mounts for sharper response and reduced noise Spring rates: 9kg/mm (front), 7kg/mm (rear) Twin tube shock design with preload adjustment range of 7–10mm Separate ride height adjustment that does not affect damper stroke Can be adjusted while fitted to the vehicle High-tensile springs tested to 600,000 cycles with less than 0.04% distortion Fully rebuildable design Golden finish with black springs Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: SUBARU IMPREZA WRX GDA GD9 GGA (2000.08-2007.06) SUBARU IMPREZA WRX STI GDB (2000.10-2004.06) – Rim P.C.D. = 100 Subaru Forester SG (2003-2008) SAAB 9-2X GGA GGE (2005-2007)

Out of Stock

Coilover Lowering Kit for Toyota Yaris - 24-Way Adjustable (2013 - 2017)-Spoilers and Bodykits Australia

Coilover Lowering Kit for Toyota Yaris - 24-Way Adjustable (2013 - 2017)

$1,059.00

Coilover Lowering Kit for Toyota Yaris - 24-Way Adjustable (2013 - 2017) Enhance the look and handling of your Toyota Yaris with this fully adjustable coilover lowering kit. Built for daily driving as well as spirited use, it offers precise ride height control and damping adjustment for a tailored driving experience. Coilover Lowering Kit for Toyota Yaris - 24-Way Adjustable (2013 - 2017) Brand new aftermarket replacement part Adjustable height lowering range: 1" – 3" 24-way adjustable damper force for comfort or performance tuning Pillow ball top mount design for sharper steering response and reduced noise Adjustable spring preload for a balanced ride setup Spring rates: Front 10 kg/mm (560 lbs/in), Rear 7 kg/mm (448 lbs/in) Made from 6061 aluminium with T6 treatment for strength and lightweight durability High tensile performance springs tested over 600,000 cycles with less than 0.04% distortion Rubber boots fitted to protect dampers from dirt and debris Includes 2 front coilovers, 2 rear coilovers, and spanner wrenches for easy adjustment Suitable for daily driving, spirited street use, track days, and drift setups Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Out of Stock

Coilover Lowering Kit for Dodge Caliber - Adjustable Height (2007 - 2012)-Spoilers and Bodykits Australia

Coilover Lowering Kit for Dodge Caliber - Adjustable Height (2007 - 2012)

$709.00

Coilover Lowering Kit for Dodge Caliber - Adjustable Height (2007 - 2012) Transform the handling and stance of your Dodge Caliber with this adjustable coilover lowering kit. Designed for both street and performance use, it allows you to fine-tune ride height and damping to suit your driving style. Coilover Lowering Kit for Dodge Caliber - Adjustable Height (2007 - 2012) Brand new aftermarket replacement part Adjustable ride height for a lower stance and improved handling 24-way adjustable damper force for customised comfort and performance Pillow ball top mount design for sharper steering response and reduced noise Adjustable spring preload for a balanced setup Spring rates: Front 10 kg/mm (560 lbs/in), Rear 8 kg/mm (448 lbs/in) Made from 6061 aluminium with T6 treatment for strength and reduced weight High tensile performance springs tested over 600,000 cycles with less than 0.04% distortion Rubber boots fitted to protect dampers from dirt and debris Complete kit includes 2 front and 2 rear coilovers for easy installation Suitable for daily driving, spirited street use, track days, and drift setups Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: Dodge Caliber (excluding SRT-4) 2007-2012 Jeep Compass (MK) FWD 2008-2017 Jeep Compass (MK) 4WD (without Off Road Package) 2008-2017 Jeep Patriot (MK) FWD 2008-2010

Coilover Lowering Kit for Mazda 3 BK / BL - Adjustable Height (2004 - 2013)-Spoilers and Bodykits Australia

Coilover Lowering Kit for Mazda 3 BK / BL - Adjustable Height (2004 - 2013)

$679.00

Coilover Lowering Kit for Mazda 3 BK / BL - Adjustable Height (2004 - 2013) Enhance the handling and stance of your Mazda 3 with this adjustable coilover kit. Designed for both daily driving and spirited weekend runs, it delivers sharper steering response, improved control, and a sportier look. Coilover Lowering Kit for Mazda 3 BK / BL - Adjustable Height (2004 - 2013) Brand new aftermarket replacement part Complete set includes 2x front and 2x rear coilovers with adjustment tools Adjustable ride height: 1" – 3" lowering range Spring rates: 10kg/mm (front), 7kg/mm (rear) Twin tube shock design with preload adjustment range of 7–10mm Pillow ball front top mounts for improved steering response and reduced noise Separate height adjustment that does not affect damper stroke Can be adjusted while fitted to the vehicle High-tensile performance springs tested to 600,000 cycles with less than 0.04% distortion Golden finish with black springs Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: Mazda 3 BK (2004-2009) Mazda 3 BL (2009-2013)

Out of Stock

Coilover Lowering Kit for Nissan Silvia S14 / 200SX / 240SX - Adjustable (1994 - 1998)-Spoilers and Bodykits Australia

Coilover Lowering Kit for Nissan Silvia S14 / 200SX / 240SX - Adjustable (1994 - 1998)

$739.00

Coilover Lowering Kit for Nissan Silvia S14 / 200SX / 240SX - Adjustable (1994 - 1998) Upgrade your Silvia’s suspension with this fully adjustable coilover lowering kit, designed to improve handling, stance, and overall driving response. With adjustable ride height, damping, and camber settings, it’s the perfect choice for both spirited street driving and track use. Coilover Lowering Kit for Nissan Silvia S14 / 200SX / 240SX - Adjustable (1994 - 1998) Brand new aftermarket replacement part Height adjustable: 1" – 3" lowering range for a more aggressive stance and lower centre of gravity 24 levels of rebound damping adjustment for customised ride quality Pillow ball front top mounts with camber plates for improved steering feel and adjustment (front only) Standard rubber rear top mounts for comfort and impact absorption (rear only) Spring rates: Front 8 kg/mm (448 lbs/in), Rear 6 kg/mm (336 lbs/in) Spring lengths: Front 180 mm, Rear 255 mm Coilover lengths: Front 420–470 mm, Rear 550–700 mm Twin-tube shock design for reliable stroke and performance Separate ride height adjustment that does not affect damper stroke Pre-set spring preload: 7–10 mm Includes 4 shocks, 4 springs, and adjustment tools for complete installation High tensile performance springs tested over 600,000 cycles with less than 0.04% distortion Fully rebuildable for long-term serviceability Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: S14 Silvia 1994-1998 (Japan Market) S14 200SX Base Model / LE 1994-1998 (Europe / Australia / New Zealand Market) S14 240SX Base Model / LE / SE 1995-1998 (USA Market)

Coilover Lowering Kit for VT / VX / VY / VZ Holden Commodore / Statesman WH / WL / WK (1999 - 2007)-Spoilers and Bodykits Australia

Coilover Lowering Kit for VT / VX / VY / VZ Holden Commodore / Statesman WH / WL / WK (1999 - 2007)

$759.00

Coilover Lowering Kit for VT / VX / VY / VZ Holden Commodore / Statesman WH / WL / WK (1999 - 2007) Upgrade the suspension of your Commodore or Statesman with this height-adjustable coilover kit. Designed for sharper handling and a sportier stance, it offers improved control while maintaining everyday comfort. Coilover Lowering Kit for VT / VX / VY / VZ Holden Commodore / Statesman WH / WL / WK (1999 - 2007) Brand new aftermarket replacement part Adjustable ride height: 1" – 3" lowering range Spring rates: 7kg/mm (front), 13kg/mm (rear) Twin tube shock design with preload adjustment range of 7–10mm Separate height adjustment that does not affect damper stroke Can be adjusted while fitted to the vehicle High-tensile performance springs tested to 600,000 cycles with less than 0.04% distortion Special surface treatment on springs to enhance performance and durability Height adjustment tools included Gold finish with black springs Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: Holden Commodore Third Generation (1997-2007) Holden Commodore VT / VT II Sedan Wagon (1997-2000) Holden VX Commodore Berlina Calais Sedan Wagon (2000-2002) Not suitable for VX Executive Sedan 3.8L V6 Holden VY Commodore Sedan Wagon (2002-2004) Holden VZ Commodore Sedan Wagon (2004-2007)

Out of Stock

Coilover Lowering Kit for Hyundai Veloster - Adjustable Damper (2013 - 2015)-Spoilers and Bodykits Australia

Coilover Lowering Kit for Hyundai Veloster - Adjustable Damper (2013 - 2015)

$1,379.00

Coilover Lowering Kit for Hyundai Veloster - Adjustable Damper (2013 - 2015) Improve the handling, stance, and responsiveness of your Hyundai Veloster with this adjustable coilover kit. Featuring ride height, camber, and damping adjustments, it offers a perfect balance of performance and comfort for street or spirited driving. Coilover Lowering Kit for Hyundai Veloster - Adjustable Damper (2013 - 2015) Brand new aftermarket replacement part Adjustable ride height: 1–3 inch lowering range for improved stance and lower centre of gravity 24-level rebound damping adjustment for fine-tuned comfort and performance Top mounts: Front pillow ball with camber plates | Rear requires OE top mounts (not included) Spring rate: Front 8 kg/mm | Rear 6 kg/mm Twin-tube shock design with 7–10mm spring preload for balanced ride quality Independent ride height adjustment without affecting damper stroke Camber plate top mounts reduce the need for a separate camber kit Pillow ball mounts for sharper steering response and reduced noise High-tensile springs tested over 600,000 cycles with distortion under 0.04% CNC-machined 6061-T6 billet aluminium components for lightweight strength and corrosion resistance Height adjustment tools included Fully rebuildable design Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Front Coilover Lowering Struts for VT / VX / VY / VZ Holden Commodore - Adjustable - Pair (1997 - 2006)-Spoilers and Bodykits Australia

Front Coilover Lowering Struts for VT / VX / VY / VZ Holden Commodore - Adjustable - Pair (1997 - 2006)

$869.00

Front Coilover Lowering Struts for VT / VX / VY / VZ Holden Commodore - Adjustable - Pair (1997 - 2006) Enhance the stance and handling of your Commodore with this pair of front adjustable coilover struts. Designed for performance and comfort, they allow you to fine-tune ride height and damping while retaining your original top mounts. Front Coilover Lowering Struts for VT / VX / VY / VZ Holden Commodore - Adjustable - Pair (1997 - 2006) Brand new aftermarket replacement part Includes: Front coilover struts with springs and shocks (OE front top mounts required, not included) Adjustable ride height: 1–3 inch lowering range for improved stance and handling 24-level rebound damping adjustment for comfort or performance driving Spring rate front: 7 kg/mm (392 lbs/in) Twin-tube shock design with 7–10mm preload for balanced ride quality Separate ride height adjustment without affecting damper stroke Dust boots fitted to protect damper seals and extend service life High-tensile springs tested over 600,000 cycles with distortion under 0.04% Components made from 6061-T6 billet aluminium for lightweight strength and corrosion resistance Steel shock bodies electroplated with zinc for long-lasting anti-corrosion protection Fully rebuildable design Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: Holden Commodore Third Generation 1997-2007 Holden Commodore VT / VT II Sedan/Wagon 1997-2000 Holden VX Commodore Berlina/Calais Sedan/Wagon 2000-2002 (Not fit VX Executive Sedan 3.8L V6) Holden VY Commodore Sedan/Wagon 2002-2004 Holden VZ Commodore Sedan/Wagon 2004-2007

Coilover Lowering Kit for Honda Civic FG1 / FG2 Coupe - 24-Way Adjustable (2006 - 2011)-Spoilers and Bodykits Australia

Coilover Lowering Kit for Honda Civic FG1 / FG2 Coupe - 24-Way Adjustable (2006 - 2011)

$659.00

Coilover Lowering Kit for Honda Civic FG1 / FG2 Coupe - 24-Way Adjustable (2006 - 2011) Upgrade your Civic FG1/FG2 Coupe with this 24-way adjustable coilover kit, designed to deliver sharper handling, improved stance, and all-round driving comfort. With height, damping, and camber adjustability, it’s ideal for both street and spirited use. Coilover Lowering Kit for Honda Civic FG1 / FG2 Coupe - 24-Way Adjustable (2006 - 2011) Brand new aftermarket replacement part Kit includes: 2 front coilovers, 2 rear coilovers (split rear shock absorber), and adjustment tools Adjustable ride height: 1–3 inch lowering range (not factory ride height) 24-way rebound and damping adjustment for tailored ride quality Front camber plates with pillow ball mounts for improved steering response Spring rate: Front 7 kg/mm (392 lbs/in) | Rear 6 kg/mm (336 lbs/in) Twin-tube shock design for efficient performance and reduced heat build-up Height adjustment possible without removing coilovers from the car High-tensile strength springs tested over 600,000 cycles with distortion under 0.04% Corrosion-resistant finish with long-lasting durability Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: HONDA CIVIC & Si VIII 2-door Coupe (FG1/FG2) 2006-2011 HONDA CIVIC & Si VIII 4-door Sedan (FA1/FA2/FA3/FA4/FA5, North America only) 2006-2011 HONDA CIVIC & Si VIII 4-door Sedan (FD1/FD2/FD3/FD4/FD6/FD7, International model) 2006-2011 Acura CSX 4-door Sedan (Canada) 2006-2011

Out of Stock

Coilover Lowering Kit for VF Holden Commodore Sedan - 24-Way Adjustable (2013 - 2017)-Spoilers and Bodykits Australia

Coilover Lowering Kit for VF Holden Commodore Sedan - 24-Way Adjustable (2013 - 2017)

$759.00

Coilover Lowering Kit for VF Holden Commodore Sedan - 24-Way Adjustable (2013 - 2017) Give your VF Commodore Sedan the ultimate suspension upgrade with this adjustable coilover kit. Designed to improve stance, handling, and comfort, it provides fine-tuned control for both daily driving and performance applications. Coilover Lowering Kit for VF Holden Commodore Sedan - 24-Way Adjustable (2013 - 2017) Brand new aftermarket replacement part Adjustable ride height: 25–75mm lowering range (depending on vehicle model) 24-level rebound damping adjustment for tailored comfort and performance Top mounts: Front standard rubber | Rear requires OE top mount Camber adjustment: Not available Spring rate: Front 8 kg/mm (448 lbs/in) | Rear 8 kg/mm (448 lbs/in) Spring length: Front 200mm | Rear 180mm Adjustable spring preload: 7–10mm recommended Twin-tube shock design for balanced handling and ride quality CNC-machined aluminium components for strength and reduced weight Heavy-duty steel lower mounts for reliability and durability Long rubber boots fitted to protect dampers from dust and wear High-tensile springs tested over 600,000 cycles with distortion under 0.04% Corrosion-resistant finish with anodised aluminium and powder-coated steel parts Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: Holden Commodore VF Sedan 2013-2017 Holden Commodore VF Wagon 2013-2017 Holden Commodore VF Ute 2013-2017

Coilover Lowering Kit for BMW 5 Series E60 525i / 530i / 545i / 550i Sedan - 24-Way Adjustable (2004 - 2010)-Spoilers and Bodykits Australia

Coilover Lowering Kit for BMW 5 Series E60 525i / 530i / 545i / 550i Sedan - 24-Way Adjustable (2004 - 2010)

$799.00

Coilover Lowering Kit for BMW 5 Series E60 525i / 530i / 545i / 550i Sedan - 24-Way Adjustable (2004 - 2010) Transform the suspension of your BMW E60 with this 24-way adjustable coilover kit. Designed for precision handling, improved stance, and everyday comfort, it allows you to fine-tune your ride for street or performance driving. Coilover Lowering Kit for BMW 5 Series E60 525i / 530i / 545i / 550i Sedan - 24-Way Adjustable (2004 - 2010) Brand new aftermarket replacement part Adjustable ride height: 25–75mm lowering range (depending on vehicle model) 24-level rebound damping adjustment for custom ride quality Top mounts: Front pillow ball | Rear standard rubber Camber adjustment: Not available Spring rate: Front 10 kg/mm (560 lbs/in) | Rear 7 kg/mm (392 lbs/in) Spring length: Front 230mm | Rear 200mm | Inner diameter 70.5mm Adjustable spring preload: 7–10mm recommended Twin-tube shock design for balanced comfort and control CNC-machined aluminium top mounts and lockers for strength and reduced weight Heavy-duty steel lower mounts for long-lasting durability Long rubber boots fitted to protect dampers from dirt and debris High-tensile springs tested over 600,000 cycles with less than 0.04% distortion Corrosion-resistant finish with anodised aluminium and powder-coated steel parts Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Out of Stock

Coilover Lowering Kit for Porsche Cayenne - Adjustable Damper (2002 - 2010)-Spoilers and Bodykits Australia

Coilover Lowering Kit for Porsche Cayenne - Adjustable Damper (2002 - 2010)

$789.00

Coilover Lowering Kit for Porsche Cayenne - Adjustable Damper (2002 - 2010) Upgrade your Porsche Cayenne with this adjustable coilover kit, designed to deliver sharper handling, improved stance, and long-lasting performance. With customisable damping and ride height, it’s suitable for both spirited driving and daily use. Coilover Lowering Kit for Porsche Cayenne - Adjustable Damper (2002 - 2010) Brand new aftermarket replacement part Kit includes: 2 front coilovers and 2 rear coilovers Adjustable ride height for a sportier stance and lower centre of gravity 24-way adjustable damping for fine-tuned comfort and performance Spring rate: Front 20 kg/mm (1120 lbs/in) | Rear 8 kg/mm (448 lbs/in) Adjustable spring preload for stability and reduced body roll Pillow ball top mounts for improved steering response and reduced noise Components made from 6061-T6 aluminium for lightweight strength and durability High-tensile springs stress tested over 600,000 cycles with distortion under 0.04% Twin-tube shock inserts with rubber boots for protection against dirt and wear Suitable for daily driving, fast road use, track days, and drifting applications Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Out of Stock

Coilover Lowering Kit for Volkswagen Golf MK7 (2012 - 2020)-Spoilers and Bodykits Australia

Coilover Lowering Kit for Volkswagen Golf MK7 (2012 - 2020)

$729.00

Coilover Lowering Kit for Volkswagen Golf MK7 (2012 - 2020) Give your VW Golf MK7 improved handling, a sharper stance, and a smoother ride with this fully adjustable coilover kit. Designed with performance and durability in mind, it offers custom damping, ride height, and camber adjustments for the perfect setup. Coilover Lowering Kit for Volkswagen Golf MK7 (2012 - 2020) Brand new aftermarket replacement part Adjustable ride height for a sportier stance and lower centre of gravity 24-way adjustable damping for tailored comfort and performance Adjustable camber plates with pillow ball mounts for sharper steering response Spring rate: Front 6 kg/mm (336 lbs/in) | Rear 5 kg/mm (280 lbs/in) Adjustable pre-load spring tension for stability and reduced body roll Components made from 6061-T6 aluminium for lightweight strength and corrosion resistance High-tensile springs tested over 600,000 cycles with distortion under 0.04% Rubber boots fitted to protect dampers from dirt and wear Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: Audi A3/S3 (8V) Mk3 2015-2019 SEAT Leon Mk3 2012-2019 Skoda Octavia Mk3 2012-2019

Coilover Lowering Kit for Ford Mustang GT Convertible 4th Gen - 24-Way Adjustable (1994 - 2004)-Spoilers and Bodykits Australia

Coilover Lowering Kit for Ford Mustang GT Convertible 4th Gen - 24-Way Adjustable (1994 - 2004)

$689.00

Coilover Lowering Kit for Ford Mustang GT Convertible 4th Gen - 24-Way Adjustable (1994 - 2004) Unlock the full potential of your Mustang GT Convertible with this 24-way adjustable coilover kit. Engineered for performance and stance, it offers precision handling, a sportier look, and durability for both daily and spirited driving. Coilover Lowering Kit for Ford Mustang GT Convertible 4th Gen - 24-Way Adjustable (1994 - 2004) Brand new aftermarket replacement part Adjustable ride height: 1–3 inch lowering range for a lower centre of gravity and aggressive stance 24-way adjustable damping for fine-tuned comfort or performance Top mounts: Front camber plates with pillow ball design for improved steering response Spring rate: Front 8 kg/mm (448 lbs/in) | Rear 7 kg/mm (392 lbs/in) Spring length: Front 230mm | Rear 180mm Coilover length: Front 485–575mm | Rear 550–600mm Twin-tube shock design with 7–10mm spring preload for balanced ride quality CNC-machined aluminium top mounts and lockers for lightweight strength Heavy-duty steel lower mounts for long-lasting reliability High-tensile springs tested over 600,000 cycles with distortion under 0.04% Long rubber boots fitted to protect dampers from dirt and wear Corrosion-resistant finish with anodised aluminium and powder-coated steel parts Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: FORD Mustang Base SN95 Convertible/Coupe 1994-2004 FORD Mustang GT SN95 Convertible/Coupe 1994-2004 FORD Mustang SVT Cobra SN95 Convertible/Coupe 1994-2004

Coilover Lowering Kit for Ford Mustang 4th Gen - Adjustable Height (1994 - 2004)-Spoilers and Bodykits Australia

Coilover Lowering Kit for Ford Mustang 4th Gen - Adjustable Height (1994 - 2004)

$719.00

Coilover Lowering Kit for Ford Mustang 4th Gen - Adjustable Height (1994 - 2004) Enhance the stance and handling of your 4th Gen Mustang with this fully adjustable coilover kit. Offering customisable ride height, damping, and camber, it provides the perfect balance of performance, comfort, and durability. Coilover Lowering Kit for Ford Mustang 4th Gen - Adjustable Height (1994 - 2004) Brand new aftermarket replacement part Adjustable ride height: 1–3 inch lowering range for a lower centre of gravity and aggressive stance 24-way adjustable damping for comfort or performance driving Top mounts: Front camber plates with pillow ball design for sharper steering response Spring rate: Front 8 kg/mm (448 lbs/in) | Rear 7 kg/mm (392 lbs/in) Spring length: Front 230mm | Rear 180mm Coilover length: Front 485–575mm | Rear 550–600mm Twin-tube shock design with 7–10mm preload for balanced ride quality CNC-machined aluminium top mounts and lockers for lightweight strength Heavy-duty steel lower mounts for long-term durability High-tensile springs tested over 600,000 cycles with distortion less than 0.04% Long rubber boots fitted to protect dampers from dirt and wear Corrosion-resistant finish with anodised aluminium and powder-coated steel parts Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Coilover Lowering Kit for Jeep Compass MK & Patriot - 24-Way Adjustable (2007 - 2010)-Spoilers and Bodykits Australia

Coilover Lowering Kit for Jeep Compass MK & Patriot - 24-Way Adjustable (2007 - 2010)

$709.00

Coilover Lowering Kit for Jeep Compass MK & Patriot - 24-Way Adjustable (2007 - 2010) Give your Jeep Compass MK or Patriot a performance boost with this fully adjustable coilover kit. Designed for improved handling, ride comfort, and stance, it provides customisable damping, ride height, and durability for both daily driving and spirited use. Coilover Lowering Kit for Jeep Compass MK & Patriot - 24-Way Adjustable (2007 - 2010) Brand new aftermarket replacement part Adjustable ride height for a lower centre of gravity and sportier stance 24-way adjustable damper settings for a tailored ride in all driving conditions Adjustable spring preload for added stability and reduced body roll Pillow ball top mounts for sharper steering response and reduced noise High-tensile springs tested over 600,000 cycles with less than 0.04% distortion Components made from 6061-T6 aluminium for strength, lightweight design, and corrosion resistance Steel shock inserts with rubber boots to protect dampers from dirt and wear Complete coilover kit – a quick and effective upgrade for both looks and performance Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: Dodge Caliber (excluding SRT-4) 2007-2012 Jeep Compass (MK) FWD 2008-2017 Jeep Compass (MK) 4WD (without Off Road Package) 2008-2017 Jeep Patriot (MK) FWD 2008-2010

244 245 246 247 248

Fast Local Dispatch

Tracked Shipping on Every Order

Easy 30 Day Returns

Free Returns on Faulty Items

Ph: 1300 362 376

Mon-Fri | 9am-5pm

Email: sales@spoilersandbodykits.com.au

✅ 28,000+ Orders Shipped Australia-Wide

✅ Serving Aussie Drivers since 2016

✅ Aussie-Owned & Operated

CATEGORIES Bodykit Parts Accessories Lighting Suspension Parts Steering Parts Engine Bay Parts Interior Parts Intake & Exhaust Parts Drivetrain Parts Body Parts Fuel System Parts Brake Parts Electrical Parts Climate Control Parts

INFO & SUPPORT FAQ's About Us Contact Us Shipping Customer Reviews Why Shop With Us Buy Now Pay Later Basic Fitting Guides Bundle Deals Become an Ambassador Earn Rewards Returns Terms & Conditions Privacy Policy

GET SOCIAL Follow us on Facebook