Products – Page 192 – Spoilers and Bodykits

Side Skirts for AU Ford Falcon Ute - XR Style (Tray Only)

$499.00

Side Skirts for AU Ford Falcon Ute - XR Style (Tray Only) If you're looking for 100% Australian made Side Skirts for AU Ford Falcon Ute in XR Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Side Skirts for AU Ford Falcon Ute - XR Style (Tray Only) Give your ute a whole new look with this pair of Tray side skirts! Tray ONLY side skirts - This is the skirt that goes in front of the rear wheels as indicated in picture (See other listing for Cabin skirts & Rear pods that go behind rear wheels) Supplied as a pair (Also available singularly) 100% Australian made Meant to be attached with urethane & small screws This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Front Bumper Bar Lip / Splitter for Honda Civic EG 3 Door Hatch (1992 - 1995 Models) - Spoilers and Bodykits Australia

Front Bumper Bar Lip / Splitter for Honda Civic EG 3 Door Hatch (1992 - 1995 Models)

$199.00

Front Bumper Bar Lip / Splitter for Honda Civic EG 3 Door Hatch (1992 - 1995 Models) If you're looking for a Front Bumper Bar Lip / Splitter for Honda Civic EG 3 Door Hatch then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style! Front Bumper Bar Lip / Splitter for Honda Civic EG 3 Door Hatch (1992 - 1995 Models) Give the front end of your Civic a completely new look with this TOUGH looking front bumper lip! Fits factory style front bumpers ONLY on Honda Civic EG Hatch 92-95 models Made of high quality injection plastic with a great looking satin black finish No need to paint - Can be installed as is - Save time & money over preparing a fibreglass lip (But you can paint it if you want it to match your cars colour) Easy installation - Supplied with fittings Please allow 2-3 days for handling BEFORE this item is shipped to you High quality durable finish (Surface may have a slight scuff mark from storage) Custom designed to suit this model Tough look plus increases your cars value Scroll up and Add to Cart Now

Rear Bumper Bar Diffuser for Honda Civic Sedan FD 8th Gen (2006 - 2012 Models) - Spoilers and Bodykits Australia

Rear Bumper Bar Diffuser for Honda Civic Sedan FD 8th Gen (2006 - 2012 Models)

$397.00

Rear Diffuser for Honda Civic Sedan FD 8th Gen (2006 - 2012 Models) If you're looking for a Rear Diffuser for Honda Civic Sedan FD 8th Gen then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Rear Diffuser for Honda Civic Sedan FD 8th Gen (2006 - 2012 Models) Give the rear end of your Civic a whole new look with this super TOUGH looking rear diffuser! Fits the factory bumper on: Civic sedan 2006-2012 - VTi / VTi-L / Sport / Limited Edition / Hybrid / 40th Anniversary Tough injection plastic construction High quality smooth satin black finish Supplied with fittings and brake light No need to paint - Can be installed as is - Save time & money over preparing a fibreglass one (But you can paint it if you want it to match your cars colour) Please allow 2-3 days for handling BEFORE this item is shipped to you High quality durable finish (Surface may have a slight scuff mark from storage) Custom designed to suit this model Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Front Grill for Mercedes Benz W204 C-Class Sedan / Wagon (2008 - 2012 Models) - Spoilers and Bodykits Australia

Front Grill for Mercedes Benz W204 C-Class Sedan / Wagon (2008 - 2012 Models)

$299.00

Front Grill for Mercedes Benz W204 C-Class Sedan / Wagon (2008 - 2012 Models) If you're looking for a Front Grill for Mercedes Benz W204 C-Class Sedan / Wagon then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Front Grill for Mercedes Benz W204 C-Class Sedan / Wagon (2008 - 2012 Models) Give the front end of your Mercedes a whole new look with this super TOUGH front grill! Fits 2008-2012 Mercedes Benz 2008-2012 C-Class sedan or wagon - C200 / C230 / C250 / C280 / C300 / C350 (NOTE: Does not fit C63 AMG) Replacement style grill - Mounts above bumper bar between head lights Tough black plastic construction Can be installed as is but should be prepped and painted for a better look Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Flares for PX1 / PX2 Ford Ranger - Set of 2 for Front Wheel Arches - Wrinkle Finish - Chunky Style (2012 - 2018 Models) - Spoilers and Bodykits Australia

Flares for PX1 / PX2 Ford Ranger - Set of 2 for Front Wheel Arches - Wrinkle Finish - Chunky Style (2012 - 2018 Models)

$369.00

Flares for PX1 / PX2 Ford Ranger - Set of 2 for Front Wheel Arches - Wrinkle Finish - Chunky Style (2012 - 2018 Models) If you're looking for a set of Flares for PX1 / PX2 Ford Ranger in Wrinkle Finish then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style! Flares for PX1 / PX2 Ford Ranger - Set of 2 for Front Wheel Arches - Wrinkle Finish - Chunky Style (2012 - 2018 Models) Pump out the size of your Ranger guards with these TOUGH looking wheel arch flares! Supplied as a set of 2 for the Front Wheel arches Made of high quality Polypropylene plastic with a great looking satin black WRINKLE finish (Higher quality & better fit than ABS plastic and easier to sand/paint) No need to paint if you don't want to - Can be installed as is - Save time & money over preparing & painting fibreglass flares (But you can paint them if you want them to match your cars colour) Supplied with rubber trim Needs to be screwed onto your guards through holes in face of flares Please allow 2-3 days for handling BEFORE this item is shipped to you High quality durable finish (Surface may have a slight scuff mark from storage) Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the automotive world!

Rear Boot Spoiler Wing for Nissan 350Z Z33 with LED Brake Light (2002 - 2008 Models) - Spoilers and Bodykits Australia

Rear Boot Spoiler Wing for Nissan 350Z Z33 with LED Brake Light (2002 - 2008 Models)

$499.00

Rear Boot Spoiler Wing for Nissan 350Z Z33 with LED Brake Light (2002 - 2008 Models) If you're looking for a Rear Boot Spoiler Wing for Nissan 350Z Z33 then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style! Rear Boot Spoiler Wing for Nissan 350Z Z33 with LED Brake Light (2002 - 2008 Models) Give the rear end of your 350Z a whole new look with this TOUGH looking boot spoiler! Fits Nissan 350Z 2002-2008 - Track / Touring / 35th Anniversary / Z33 models Made of high quality ABS plastic with a great looking satin black finish No need to paint - Can be installed as is - Save time & money over preparing a fibreglass spoiler (But you can paint it if you want it to match your cars colour) Supplied with LED brake light & fittings Easy installation - Has screw inserts for simple attachment Please allow 2-3 days for handling BEFORE this item is shipped to you High quality durable finish (Surface may have a slight scuff mark from storage) Custom designed to suit this model Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the automotive world!

Rear Boot Spoiler Wing for Subaru Impreza Sedan - Ducktail Style (2002 - 2007 Models) - Spoilers and Bodykits Australia

Rear Boot Spoiler Wing for Subaru Impreza Sedan - High Wing Style (2002 - 2007 Models)

$359.00

Rear Boot Spoiler Wing for Subaru Impreza Sedan - High Wing Style (2002 - 2007 Models) If you're looking for a Rear Boot Spoiler Wing for Subaru Impreza Sedan in High Wing Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style! Rear Boot Spoiler Wing for Subaru Impreza Sedan - High Wing Style (2002 - 2007 Models) Give the rear end of your Subaru a whole new look with this TOUGH looking boot spoiler! Fits Subaru Impreza 2002-2007 sedan - GX / R / RS / WRX / Club Spec / STi / S models Made of high quality ABS plastic with a great looking satin black finish No need to paint - Can be installed as is - Save time & money over preparing a fibreglass spoiler (But you can paint it if you want it to match your cars colour) Supplied with fittings Please allow 2-3 days for handling BEFORE this item is shipped to you High quality durable finish (Surface may have a slight scuff mark from storage) Custom designed to suit this model Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the automotive world!

Bonnet Scoop for EA / EB / ED Ford Falcon - GT Style

$339.00

Bonnet Scoop for EA / EB / ED Ford Falcon - GT Style If you're looking for 100% Australian made Bonnet Scoop for EA / EB / ED Ford Falcon in GT Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet Scoop for EA / EB / ED Ford Falcon - GT Style Give your Falcon a whole new look with this tough looking bonnet scoop! Fits all EA / EB / ED Bonnets Does not have hole at front scoop opening (Its blanked off - However you can easily cut this out) Has embedded threaded bolts for attaching to bonnet (2x at back & 1x at front) 100% Australian made This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Bonnet Scoop for BA XR Ford Falcon - DJR Style

$329.00

Bonnet Scoop for BA XR Ford Falcon - DJR Style If you're looking for a Bonnet Scoop for BA XR Ford Falcon in DJR Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet Scoop for BA XR Ford Falcon - DJR Style Give your BA Falcon bonnet that finishing touch with this tough bonnet scoop 100% Australian made Can be mounted on top of the XR bonnet bulge of the BA XR Falcon if needed This product is made to order - Please see above for approx build time Custom designed to suit this model Full fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

Front Grill for VK Holden Commodore - Group A Style

$319.00

Front Grill for VK Holden Commodore - Group A Style If you're looking for a Front Grill for VK Holden Commodore in Group A Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Front Grill for VK Holden Commodore - Group A Style Give your Commodore a whole new look with this TOUGH looking front grill! 100% Australian made This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Carbon Fibre Rear Boot Lip Spoiler for BMW M4 F82 4 Series (2014 - 2015 Models) - Spoilers and Bodykits Australia

Carbon Fibre Rear Boot Lip Spoiler for BMW M4 F82 4 Series (2014 - 2015 Models)

$349.00

Carbon Fibre Rear Boot Lip Spoiler for BMW M4 F82 4 Series (2014 - 2015 Models) If you're looking for a Carbon Fibre Rear Boot Lip Spoiler for BMW M4 F82 4 Series then this is the one for you. Tough look, plus tough construction. Give your car that sleek aftermarket look and make it stand out from the crowd! Carbon Fibre Rear Boot Lip Spoiler for BMW M4 F82 4 Series (2014 - 2015 Models) Add that extra touch to your car with this sleek boot lip spoiler Made of REAL Carbon Fibre - Made with a consistent weave & high quality clear coating Has 3M double sided tape on back of spoiler - See Important Note Below Super easy to fit - No modification or cutting required Please allow 1-3 days for handling BEFORE this item is shipped out to you Tough look plus increases your cars value Limited Stock - Add to Cart Now! Important note: Prior to fitting this product, ensure your vehicle is thoroughly washed and clean ensuring the mating surface you are fitting the product to is free from any GREASE / WAX / POLISH or any other contaminants. As surface preparation is very important, we recommend the use of a “Wash and Grease Remover” solution to be used on the mating surface as per directions on the solvent bottle you use. Failing to prepare the surface correctly, you risk the possibility of the product not adhering to the surface correctly & coming off. Be sure to sit this spoiler on your car BEFORE trying to stick it to your car. The double sided tape (provided on back of spoiler) and using some sikaflex/urethane (not supplied), can be used to stick the spoiler down. We also recommend screwing it down. When fitting, apply firm but not excessive pressure or weight. If you are in any way unsure of how to attach this to your vehicle, please get a professional to attach it. We will not be held liable for any fitment issues for how you or anyone else fits this spoiler or the item becoming unattached from your vehicle. Failing to follow these instructions will void any return or refund policy on the product.

Cover Kit for PX 2 Ford Ranger - Carbon Fibre Style 6 Pieces (2015 - 2018) - Spoilers and Bodykits Australia

Cover Kit for PX2 Ford Ranger - Carbon Fibre Style (2015 - 2018)

$469.00

Cover Kit for PX2 Ford Ranger - Carbon Fibre Style (2015 - 2018) This kit includes: Mirror Covers (Pair) (Will fit the XL and base models but since those models do not have blinkers on the mirrors there will be a gap) Rear Tail Light Covers (Pair) Head Light Covers (Pair) Door Handle Covers (4) Fog Light Covers (Pair - Suits PX2 ONLY, does not fit WILDTRAK) Side Vent Covers If you're looking for a Cover Kit for PX2 Ford Ranger in Carbon Fibre Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Cover Kit for PX2 Ford Ranger - Carbon Fibre Style (2015 - 2018) Complete the look of your Ranger with this full 6 piece carbon fibre-look covers! Note: These are not made of carbon fibre - They are a carbon fibre look finish Attaches to mirrors with double sided tape (provided) Quality plastic construction Custom designed to suit this model Super strong build quality Tough look plus increases your cars value Scroll up and Add to Cart NOW! Important note: Prior to fitting this product, ensure your vehicle is thoroughly washed and clean ensuring the mating surface you are fitting the product to is free from any GREASE / WAX / POLISH or any other contaminants. As surface preparation is very important, we recommend the use of a “Wash and Grease Remover” solution to be used on the mating surface as per directions on the solvent bottle you use. Failing to prepare the surface correctly, you risk the possibility of the product not adhering to the surface correctly & coming off. When fitting, apply firm but not excessive pressure or weight. Failing to follow these instructions will void your warranty on the product.

Roof Spoiler for Nissan X-Trail - Sports Style (2001 - 2007 Models)

$479.00

Roof Spoiler for Nissan X-Trail - Sports Style (2001 - 2007 Models) If you're looking for a 100% Australian made Roof Spoiler for Nissan X-Trail then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Roof Spoiler for Nissan X-Trail - Sports Style (2001 - 2007 Models) Give your X-Trail a new look with this sleek roof spoiler! 100% Australian made Meant to be screwed onto original factory rails on top of roof at rear of vehicle This product is made to order - Please see above for approx build time Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW!

Rear Bumper Bar for VT / VX Holden Commodore Sedan - V8 Supercar Style

$829.00

Rear Bar for VT / VX Holden Commodore Sedan - V8 Supercar Style If you're looking for 100% Australian made Rear Bar for VT / VX Holden Commodore Sedan in V8 Supercar Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Rear Bar for VT / VX Holden Commodore Sedan - V8 Supercar Style Transform the look of your Commodore with this SUPER TOUGH rear bumper bar in Supercar style! 100% Australian made NOTE! This bumper bar does not mount to factory mounting points as they are just like the V8 Supercar bars that have quick-release mounts (You must fabricate your own mounting brackets) Will not fit a Monaro This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Rear Bumper Bar for VN / VP / VR / VS Holden Commodore Ute

$729.00

Rear Bar for VN / VP / VR / VS Holden Commodore Ute If you're looking for 100% Australian made Rear Bar for VN / VP / VR / VS Holden Commodore Ute then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Rear Bar for VN / VP / VR / VS Holden Commodore Ute Give your pride and joy a whole new look with this tough looking rear bumper bar! 100% Australian made This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Tail Lights for VL Holden Commodore Calais Sedan (1986 - 1988 Models) - Spoilers and Bodykits Australia

Tail Lights for VL Holden Commodore Sedan - Calais Style

$269.00

Tail Lights for VL Holden Commodore Sedan - Calais Style If you're looking for a set of Tail Lights for VL Holden Commodore Sedan in Calais Style then this is the one for you. Tough look and cool design. Give your car that aftermarket look and style. Tail Lights for VL Holden Commodore Sedan - Calais Style Replace your old worn out lights with these top quality aftermarket replacement tail lights! Supplied as a pair (Left & Right) Uses your existing globes Simple 'Plug & Play' installation (however if you're unfamiliar with working on vehicles, we recommend an auto electrician for installation) Please allow 2-3 days for handling before this item is shipped to you Shipping Australia Wide Scroll up and Order NOW Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Bonnet Scoop for VR / VS Holden Commodore - 4 Inch Reverse Cowl

$409.00

Bonnet Scoop for VR / VS Holden Commodore - 4 Inch Reverse Cowl If you're looking for Bonnet Scoop for VR / VS Holden Commodore 4 Inch Reverse Cowl then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet Scoop for VR / VS Holden Commodore - 4 Inch Reverse Cowl Sleek low-line design to toughen up the front end of your VR / VS Commodore! 100% Australian made Meant to be attached to bonnet with urethane and small screws Covers full length of bonnet This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Bonnet Gas Struts for EA / EB / ED / EF / EL Ford Falcon (1988 - 1998 Models)

$89.00

Bonnet Gas Struts for EA / EB / ED / EF / EL Ford Falcon (1988 - 1998 Models) If you're looking for Bonnet Gas Struts for EA / EB / ED / EF / EL Ford Falcon then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet Gas Struts for EA / EB / ED / EF / EL Ford Falcon (1988 - 1998 Models) Make easy work of lifting your bonnet with these aftermarket bonnet gas struts! Suits EA / EB / ED / EF / EL Ford Falcon / Fairmont (1988 - 1998 Models) Supplied as a pair Easy installation Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Limited Stock - Scroll up and order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Out of Stock

Flares for Mazda RX 2 / RX 3 / RX 4 2 Door Coupe (Set of 4) - Spoilers and Bodykits Australia

Flares for Mazda RX2 / RX3 / RX4 2-Door Coupe (Set of 4)

$259.00

Flares for Mazda RX 2 / RX 3 / RX 4 2-Door Coupe (Set of 4) If you're looking for a set of Flares for Mazda RX 2 / RX 3 / RX 4 2-Door Coupe (Set of 4) then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style! Flares for Mazda RX 2 / RX 3 / RX 4 2-Door Coupe (Set of 4) Pump out the size of your Mazda RX guards with these TOUGH looking wheel arch flares! Supplied as a set of 4 Made of high quality Polypropylene plastic with a great looking smooth satin black finish (Higher quality than ABS plastic and easier to sand/paint) No need to paint if you don't want to - Can be installed as is - Save time & money over preparing & painting fibreglass flares (But you can paint them if you want them to match your cars colour) Due to the highly flexible nature of these flares, they can fit a variety of different car model guards - Easily trimmed to fit around different shaped guards, trims, bumpers etc Fits guard width from approx 630mm to 945mm & no need for a rubber trim seal Simple installation - Can be attached to car with urethane / double sided tape / screws etc Please allow 2-3 days for handling BEFORE this item is shipped to you High quality durable finish (Surface may have a slight scuff mark from storage) Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the automotive world!

Rear Boot Spoiler for EF / EL Ford Falcon Sedan with LED Brake Light - EL XR6 Style-Spoilers and Bodykits Australia

Rear Boot Spoiler for EF / EL Ford Falcon Sedan with LED Brake Light - EL XR6 Style

$489.00

Rear Boot Spoiler for EF / EL Ford Falcon Sedan with LED Brake Light - EL XR6 Style If you're after an Australian made Rear Boot Spoiler for EF / EL Ford Falcon Sedan with LED Brake Light in EL XR6 Style, this is the perfect choice. Designed with a tough, durable construction, it not only enhances protection but also gives your car a bold aftermarket look and style. Rear Boot Spoiler for EF / EL Ford Falcon Sedan with LED Brake Light - EL XR6 Style Give your Falcon a whole new look with this TOUGH looking boot spoiler This is the smaller 3-leg XR6 standard style spoiler (Larger XR8 spoiler also available - see other listing for this) 100% Australian made Fits all EF / EL Falcon Sedan models Includes LED brake light Spoiler has steel plate in base of legs to screw and bolt into This product is made to order - Please see above for approx build time Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart Now

Rear Tailgate Roof Spoiler for VN / VP / VR / VS Holden Commodore Wagon - Spoilers and Bodykits Australia

Rear Tailgate Roof Spoiler for VN / VP / VR / VS Holden Commodore Wagon

$359.00

Rear Tailgate Roof Spoiler for VN / VP / VR / VS Holden Commodore Wagon If you're looking for 100% Australian made Rear Tailgate Roof Spoiler for VN / VP / VR / VS Holden Commodore Wagon then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Rear Tailgate Roof Spoiler for VN / VP / VR / VS Holden Commodore Wagon Give your Commodore a whole new look with this sleek looking tailgate spoiler! Fits all VN / VP / VR / VS Commodore Wagons 100% Australian made Supplied with fittings This product is made to order - Please see above for approx build time Full fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Rear Boot Spoiler for VR / VS Holden Commodore Sedan - SS Style - Spoilers and Bodykits Australia

Rear Boot Spoiler for VR / VS Holden Commodore Sedan - SS Style

$449.00

Boot Spoiler for VR / VS Holden Commodore - SS Style If you're looking for 100% Australian made Boot Spoiler for VR / VS Holden Commodore in SS Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Boot Spoiler for VR / VS Holden Commodore - SS Style Give your Commodore a whole new look with this TOUGH looking rear spoiler! 100% Australian made Supplied with LED brake light 3 leg spoiler - 1 leg on each outer side & 1 smaller leg in the middle Has metal inserts in legs in which you drill to attach screws (NOT pre-drilled - Sit the spoiler on your boot and drill into the legs where you need the holes) This product is made to order - Please see above for approx build time Custom designed to suit this model Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW!

Out of Stock

Fog Lights for Mitsubishi Triton MN (2009 - 2015 Models)

$199.00

Fog Lights for Mitsubishi Triton MN (2009 - 2015 Models) If you're looking for a set of Fog Lights for Mitsubishi Triton MN then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Fog Lights for Mitsubishi Triton MN (2009 - 2015 Models) Top quality aftermarket replacement fog lights Complete kit - 2 fog lights (L & R), frames, wiring, fog light surrounds, hardware, bulbs Supplied as a pair (Left & Right) Easy installation (Some wiring modification may be needed) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Tough look plus increases your cars value Limited Stock - Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Upper Front Bumper Bar for VL Holden Commodore - Walkinshaw Style - Spoilers and Bodykits Australia

Upper Front Bumper Bar for VL Holden Commodore - Walkinshaw Style

$749.00

Upper Front Bumper Bar for VL Holden Commodore - Walkinshaw Style If you're looking for a Upper Front Bar for VL Holden Commodore in Walkinshaw Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Upper Front Bar for VL Holden Commodore - Walkinshaw Style Give the front end of your VL a whole new look with this upper bumper bar section! This is the upper front bar only (Can also supply the lower front skirt lip - See other listing) As per original parts 100% Australian made Has threaded inserts in bumper (If also purchasing the front lower lip, then you drill through it to put screws into these threaded inserts) This product is made to order - Please see above for approx build time Quality fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

190 191 192 193 194

Fast Local Dispatch

Tracked Shipping on Every Order

Easy 30 Day Returns

Free Returns on Faulty Items

Ph: 1300 362 376

Mon-Fri | 9am-5pm

Email: sales@spoilersandbodykits.com.au

✅ 28,000+ Orders Shipped Australia-Wide

✅ Serving Aussie Drivers since 2016

✅ Aussie-Owned & Operated

CATEGORIES Bodykit Parts Accessories Lighting Suspension Parts Steering Parts Engine Bay Parts Interior Parts Intake & Exhaust Parts Drivetrain Parts Body Parts Fuel System Parts Brake Parts Electrical Parts Climate Control Parts

INFO & SUPPORT FAQ's About Us Contact Us Shipping Customer Reviews Why Shop With Us Buy Now Pay Later Basic Fitting Guides Bundle Deals Become an Ambassador Earn Rewards Returns Terms & Conditions Privacy Policy

GET SOCIAL Follow us on Facebook