Products – Page 194 – Spoilers and Bodykits

Front Bumper Bar for R33 Nissan Skyline GTS / GTS-T Coupe / Sedan - TS Style - Spoilers and Bodykits Australia

Front Bumper Bar for R33 Nissan Skyline GTS / GTS-T Coupe / Sedan - TS Style

$699.00

Front Bumper Bar for R33 Nissan Skyline GTS / GTS-T Coupe / Sedan If you're looking for a Front Bumper Bar for R33 Nissan Skyline GTS / GTS-T Coupe / Sedan then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Front Bumper Bar for R33 Nissan Skyline GTS / GTS-T Coupe / Sedan - TS Style Give the front end of your R33 a whole new look with this TOUGH looking front bumper bar! 100% Australian made Suits R33 2 door coupe & 4 door sedan models Custom designed to suit this model Quality fibreglass construction Super strong build quality This product is made to order - Please see above for approx build time Note: Some trimming of reinforcement bar may be needed when fitting this bar (Not supplied with reo bar) Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

Bonnet Gas Struts for Toyota Landcruiser 100 Series FZJ / HDJ / HZJ (03/1998 - 2007 Models)

$89.00

Bonnet Gas Struts for Toyota Landcruiser 100 Series FZJ / HDJ / HZJ (03/1998 - 2007 Models) If you're looking for Bonnet Gas Struts for Toyota Landcruiser 100 Series then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet Gas Struts for Toyota Landcruiser 100 Series FZJ / HDJ / HZJ (03/1998 - 2007 Models) Make easy work of lifting your bonnet with these aftermarket bonnet gas struts! Supplied as a pair Suits 3/98-2007 FZJ, HDJ, HZJ100 Series & All models 6/98-2007 UZJ100 Easy installation Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Limited Stock - Scroll up and order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Rear Boot Spoiler for VN / VP Holden Commodore Sedan - VN Group A Style - Spoilers and Bodykits Australia

Rear Boot Spoiler for VN / VP Holden Commodore Sedan - VN Group A Style

$879.00

Rear Boot Spoiler for VN / VP Holden Commodore Sedan - VN Group A Style If you're looking for a Rear Boot Spoiler for VN Holden Commodore in Group A Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Rear Boot Spoiler for VN / VP Holden Commodore Sedan - VN Group A Style Give your Commodore a whole new look with this TOUGH looking rear spoiler! 100% Australian made This is a 3 piece spoiler - Includes the 2 pieces that sit on the outer rear quarter panel also This product is made to order - Please see above for approx build time Full fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW!

Tailgate Gas Struts for 80 Series Toyota Landcruiser / Lexus LX450 (05/1990 - 03/1998 Models) - Spoilers and Bodykits Australia

Tailgate Gas Struts for 80 Series Toyota Landcruiser / Lexus LX450 (05/1990 - 03/1998 Models)

$89.00

Tailgate Gas Struts for 80 Series Toyota Landcruiser / Lexus LX450 (05/1990 - 03/1998 Models) If you're looking for Tailgate Gas Struts for 80 Series Toyota Landcruiser / Lexus LX450 then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Tailgate Gas Struts for 80 Series Toyota Landcruiser / Lexus LX450 (05/1990 - 03/1998 Models) Replace your old worn out struts with these aftermarket tailgate gas struts! Suits 80 Series Toyota Landcruiser / LX450 (05/1990 - 03/1998 Models) Supplied as a pair Easy installation Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Limited Stock - Scroll up and order NOW!

Bonnet Gas Struts for BA / BF Ford Falcon

$89.00

Bonnet Gas Struts for BA / BF Ford Falcon If you're looking for Bonnet Gas Struts for BA / BF Ford Falcon then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Bonnet Gas Struts for BA / BF Ford Falcon Make easy work of lifting your bonnet with these aftermarket bonnet gas struts! Suits BA / BF Series Ford Falcon / Fairlane / Fairmont / FPV / XR6 / XR8 / GT / GTP Sedan, Wagon & Ute models Supplied as a pair Easy installation Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Limited Stock - Scroll up and order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Flares for Volkswagen Golf 5 (Set of 4) - Spoilers and Bodykits Australia

Flares for Volkswagen Golf 5 (Set of 4)

$259.00

Flares for Volkswagen Golf 5 (Set of 4) If you're looking for a set of Flares for Volkswagen Golf 5 (Set of 4) then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style! Flares for Volkswagen Golf 5 (Set of 4) Pump out the size of your VW Golf 5 guards with these TOUGH looking wheel arch flares! Supplied as a set of 4 Made of high quality Polypropylene plastic with a great looking smooth satin black finish (Higher quality than ABS plastic and easier to sand/paint) No need to paint if you don't want to - Can be installed as is - Save time & money over preparing & painting fibreglass flares (But you can paint them if you want them to match your cars colour) Due to the highly flexible nature of these flares, they can fit a variety of different car model guards - Easily trimmed to fit around different shaped guards, trims, bumpers etc Fits guard width from approx 630mm to 945mm & no need for a rubber trim seal Simple installation - Can be attached to car with urethane / double sided tape / screws etc Please allow 2-3 days for handling BEFORE this item is shipped to you High quality durable finish (Surface may have a slight scuff mark from storage) Tough look plus increases your cars value Scroll up and Add to Cart NOW!

Flares for Honda Integra DC2 / DC5 (Set of 4) (1993 - 2006 Models) - Spoilers and Bodykits Australia

Flares for Honda Integra DC2 / DC5 (Set of 4) (1993 - 2006 Models)

$259.00

Flares for Honda Integra DC2 / DC5 (Set of 4) (1993 - 2006 Models) If you're looking for a set of Flares for Honda Integra DC2 / DC5 (Set of 4) then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style! Flares for Honda Integra DC2 / DC5 (Set of 4) (1993 - 2006 Models) Pump out the size of your Integra guards with these TOUGH looking wheel arch flares! Supplied as a set of 4 Made of high quality Polypropylene plastic with a great looking smooth satin black finish (Higher quality than ABS plastic and easier to sand/paint) No need to paint if you don't want to - Can be installed as is - Save time & money over preparing & painting fibreglass flares (But you can paint them if you want them to match your cars colour) Due to the highly flexible nature of these flares, they can fit a variety of different car model guards - Easily trimmed to fit around different shaped guards, trims, bumpers etc Fits guard width from approx 630mm to 945mm & no need for a rubber trim seal Simple installation - Can be attached to car with urethane / double sided tape / screws etc Please allow 2-3 days for handling BEFORE this item is shipped to you High quality durable finish (Surface may have a slight scuff mark from storage) Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the automotive world!

Flares for Nissan 180SX 2 Door Coupe (Set of 4) - Spoilers and Bodykits Australia

Flares for Nissan 180SX 2 Door Coupe (Set of 4)

$259.00

Flares for Nissan 180SX 2 Door Coupe (Set of 4) If you're looking for a set of Flares for Nissan 180SX 2 Door Coupe (Set of 4) then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style! Flares for Nissan 180SX 2 Door Coupe (Set of 4) Pump out the size of your Nissan 180SX guards with these TOUGH looking wheel arch flares! Supplied as a set of 4 Made of high quality Polypropylene plastic with a great looking smooth satin black finish (Higher quality than ABS plastic and easier to sand/paint) No need to paint if you don't want to - Can be installed as is - Save time & money over preparing & painting fibreglass flares (But you can paint them if you want them to match your cars colour) Due to the highly flexible nature of these flares, they can fit a variety of different car model guards - Easily trimmed to fit around different shaped guards, trims, bumpers etc Fits guard width from approx 630mm to 945mm & no need for a rubber trim seal Simple installation - Can be attached to car with urethane / double sided tape / screws etc Please allow 2-3 days for handling BEFORE this item is shipped to you High quality durable finish (Surface may have a slight scuff mark from storage) Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the automotive world!

Rear Roof Fin Spoiler for Subaru Impreza Sedan (2014 - 2017 Models) - Spoilers and Bodykits Australia

Rear Roof Fin Spoiler for Subaru Impreza Sedan (2014 - 2017 Models)

$109.00

Rear Roof Fin Spoiler for Subaru Impreza Sedan (2014 - 2017 Models) If you're looking for a Rear Roof Fin Spoiler for Subaru Impreza Sedan then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style! Rear Roof Fin Spoiler for Subaru Impreza Sedan (2014 - 2017 Models) Give the rear end of your Subaru a whole new look with this TOUGH looking roof fins spoiler! Fits Subaru Impreza - WRX / STi / R / RX / RS / 2.0i / Premium / 2.0i-L / 2.0i-S / G4 models Made of high quality ABS injection plastic with a great looking satin black finish No need to paint - Can be installed as is - Save time & money over preparing a fibreglass spoiler (But you can paint it if you want it to match your cars colour) Easy installation - Meant to be attached with a strong adhesive like sikaflex / urethane and/or double sided tape (Not supplied) Covers and fits over factory antenna Please allow 2-3 days for handling BEFORE this item is shipped to you High quality durable finish (Surface may have a slight scuff mark from storage) Custom designed to suit this model Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the automotive world!

Rear Boot Bobtail Spoiler for BMW E30 Coupe & 4 Door Sedan - M1 Style - Spoilers and Bodykits Australia

Rear Boot Bobtail Spoiler for BMW E30 Coupe & 4 Door Sedan - M1 Style

$369.00

Rear Boot Bobtail Spoiler for BMW E30 Coupe & 4 Door Sedan - M1 Style If you're looking for a Rear Boot Bobtail Spoiler for BMW E30 Coupe & 4 Door Sedan then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style! Rear Boot Bobtail Spoiler for BMW E30 Coupe & 4 Door Sedan - M1 Style Give the rear end of your BMW a whole new look with this TOUGH looking boot spoiler! Fits all BMW E30 Series Coupes & 4 Door Sedans Made of high quality ABS plastic with a great looking satin black finish No need to paint - Can be installed as is - Save time & money over preparing a fibreglass spoiler (But you can paint it if you want it to match your cars colour) Please allow 2-3 days for handling BEFORE this item is shipped to you High quality durable finish (Surface may have a slight scuff mark from storage) Custom designed to suit this model Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the automotive world!

Rear Window Roof Spoiler for Honda Jazz (2008 - 2014 Models) - Spoilers and Bodykits Australia

Rear Window Roof Spoiler for Honda Jazz (2008 - 2014)

$289.00

Rear Window Roof Spoiler for Honda Jazz (2008 - 2014) If you're looking for a Rear Window Roof Spoiler for Honda Jazz then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style! Rear Window Roof Spoiler for Honda Jazz (2008 - 2014) Give the rear end of your Honda Jazz a whole new look with this TOUGH looking roof spoiler! Fits Honda Jazz 2008-2014 GLi / Hybrid / Vibe / Vibe-S / VTi / VTi-S models Made of high quality ABS plastic with a great looking satin black finish No need to paint - Can be installed as is - Save time & money over preparing a fibreglass spoiler (But you can paint it if you want it to match your cars colour) Easy installation - Fits with screws & brackets (provided) and can fit over factory spoiler High quality durable finish (Surface may have a slight scuff mark from storage) Custom designed to suit this model Tough look plus increases your cars value Scroll up and Add to Cart NOW

Out of Stock

Rear Window Roof Spoiler for Honda Accord Euro Sedan CL9 (2004 - 2008 Models) - Spoilers and Bodykits Australia

Rear Window Roof Spoiler for Honda Accord Euro Sedan CL9 (2004 - 2008 Models)

$239.00

Rear Window Roof Spoiler for Honda Accord Euro Sedan CL9 (2004 - 2008 Models) If you're looking for a Rear Window Roof Spoiler for Honda Accord Euro Sedan CL9 then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style! Rear Window Roof Spoiler for Honda Accord Euro Sedan CL9 (2004 - 2008 Models) Give the rear end of your Honda Accord a whole new look with this TOUGH looking roof spoiler! Fits Honda Accord Euro - Limited Edition / Luxury / Sport / Tourer / CL9 models Made of high quality ABS plastic with a great looking satin black finish No need to paint - Can be installed as is - Save time & money over preparing a fibreglass spoiler (But you can paint it if you want it to match your cars colour) Easy installation - Meant to be attached with a strong adhesive like sikaflex / urethane and/or double sided tape (Not supplied) Please allow 2-3 days for handling BEFORE this item is shipped to you High quality durable finish (Surface may have a slight scuff mark from storage) Custom designed to suit this model Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the automotive world!

Out of Stock

LED Tail Lights with Sequential Indicators & White DRL Bar for VE Holden Commodore Sedan - Spoilers and Bodykits Australia

LED Tail Lights with Sequential Indicators & White DRL Bar for VE Holden Commodore Sedan

$669.00

LED Tail Lights with Sequential Indicators & White DRL Bar for VE Holden Commodore Sedan If you're looking for a set of LED Tail Lights with Sequential Indicators & White DRL Bar for VE Holden Commodore Sedan then this is the one for you. Great design and super high quality. Give your car that aftermarket look and style. LED Tail Lights with Sequential Indicators & White DRL Bar for VE Holden Commodore Sedan Give your VE rear end a whole new look with these sleek, modern tail lights! Top quality aftermarket tail lights Full LED design - No need to swap any globes over from your old lights Suits VE Series 1 & 2 2006-2013 Omega / SS / SSV / SV6 sedan models Note: Will NOT fit Berlina & Calais models Supplied as a pair (Left & Right) Clear outer lens and black inner background, White LED Running light bar (lights up red), LED Brake light, LED Indicator light & awesome LED sequential indicators that flash from one side to the other Plug & Play - No wiring modification needed – Plugs straight into factory wiring Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Tough look plus increases your cars value Very Limited Stock - Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, Specials, New Parts and all the latest in the Automotive World!

Tail Lights for Holden Barina SB 3 Door - Chrome (04/1994 - 07/2001 Models)

$109.00

Tail Lights for Holden Barina SB 3 Door - Chrome (04/1994 - 07/2001 Models) *** FREE Delivery Australia Wide on This Item! *** If you're looking for a set of Tail Lights for Holden Barina SB 3 Door then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Tail Lights for Holden Barina SB 3 Door - Chrome (04/1994 - 07/2001 Models) Premium quality aftermarket replacement tail lights Supplied as a pair (Left & Right) (Also available separately - Contact us for this) No wiring modification needed – Plugs straight into factory wiring Give your car that new look & increase your cars value Please allow 2-3 days for handling BEFORE this item is shipped to you Very Limited Stock - Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the Automotive world!

Tail Lights for Tabletop Steel Tray for PJ / PK Ford Ranger Ute (12/2006 - 09/2011 Models) - Spoilers and Bodykits Australia

Tail Lights for Tabletop Steel Tray for PJ / PK Ford Ranger Ute (12/2006 - 09/2011 Models)

$97.00

Tail Lights for Tabletop Steel Tray for PJ / PK Ford Ranger Ute (12/2006 - 09/2011 Models) *** FREE Delivery Australia Wide on This Item! *** If you're looking for a set of Tail Lights for Tabletop Steel Tray for PJ / PK Ford Ranger Ute then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Tail Lights for Tabletop Steel Tray for PJ / PK Ford Ranger Ute (12/2006 - 09/2011 Models) Premium quality aftermarket replacement tail lights Supplied as a pair (Left & Right) (Also available separately - Contact us for this) Plugs straight into factory wiring (Some models may have different plug in which case you just rewire to suit new plug) Give your car that new look & increase your cars value Please allow 2-3 days for handling BEFORE this item is shipped to you Very Limited Stock - Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the Automotive world!

Out of Stock

LED Brake Light for Rear Spoiler (349mm) - Spoilers and Bodykits Australia

LED Brake Light for Rear Spoiler (349mm)

$159.00

LED Brake Light for Rear Spoiler (349mm) *** This tail light can fit numerous rear spoilers - See details below *** If you're looking for a LED Brake Light for a Rear Spoiler then this is the one for you. Tough look, plus tough construction, give your car that aftermarket look. LED Brake Light for Rear Spoiler High quality aftermarket replacement LED rear spoiler brake light Please check the length & amount of tabs your current light has to make sure it matches all details below (Send us a photo and measurements if you're unsure) Approx 349mm in length Has 2x mounting tabs Part no: LED3492 Can be used on numerous spoilers - Most EVO 4, 5 & 6 rear spoiler wings run this brake light Ready to fit Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with sales, new parts and all the goss in the bodykits world!

Front Lip for Subaru WRX GC8 - STI Type 2 Style (1998 - 2000 Models) - Spoilers and Bodykits Australia

Front Lip for Subaru WRX GC8 - STI Type 2 Style (1998 - 2000 Models)

$379.00

Front Lip for Subaru WRX GC8 - STI Type 2 Style (1998 - 2000 Models) If you're looking for a Front Lip for Subaru WRX GC8 - STI Type 2 Style then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look while improving performance. Front Lip for Subaru WRX GC8 - STI Type 2 Style (1998 - 2000 Models) This front lip attaches to the bottom of your stock front bumper bar Super tough Poly-Urethane construction Matt black in colour Front lip can be painted or left as is Supplied with all screws needed to fit Easy installation - Holes need to be drilled (Instructions NOT supplied - See BASIC instructions below) Please allow 2-3 days for handling BEFORE this item is shipped to you Custom designed to suit this model Quality guaranteed Tough look plus increases your cars value Scroll up and Order NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world! Please Note: Lips are not bent or folded when we send them out. However, if you do receive your lip and it's distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. These Polyurethane front lips have qualities that allows for bending and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting. We recommend a professional to install at all times but here’s a general installation guide: Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc). We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car. After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

Front Bumper Bar for Mazda RX 7 (Series 2) - Spoilers and Bodykits Australia

Front Lower Bumper Bar for Mazda RX7 Series 2

$599.00

Front Lower Bumper Bar for Mazda RX7 Series 2 If you're looking for a 100% Australian made Front Lower Bumper Bar for Mazda RX7 Series 2 then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style. Front Lower Bumper Bar for Mazda RX7 Series 2 Give your RX7 a whole new look with this TOUGH looking lower bumper bar! 100% Australian made This product is made to order - Please see above for approx build time Full fibreglass construction Super strong build quality Make sure to pre-fit this item before prepping/modifying/painting it Comes unpainted - Gel coat finish - Ready to prep & paint (Gel coat colour may be black, grey or white depending on materials at time of construction) This is a 100% hand made fibreglass item so please note that some adjustment, sanding, trimming etc may be applicable in preparing & fitting this item, especially when fitting to older vehicles or vehicles that have previously been in an accident Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Snorkel for BT50 Mazda (2007 - 2011) - Spoilers and Bodykits Australia

Snorkel for BT-50 Mazda (2007 - 2011)

$229.00

Snorkel for BT50 Mazda (2007 - 2011) If you're looking for a Snorkel for BT50 Mazda (2007 - 2011) then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look while improving performance. Snorkel for BT50 Mazda Suits 2007 - 2011 models Comes with all mounting hardware and internal pipes to fit Quality black plastic construction Custom designed to suit this model Super strong build quality Comes unpainted Tough look plus increases your cars value Scroll up and Add to Cart NOW! Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Cold Air Intake MAFLESS Kit to suit VE V8 6.0 & 6.2L Engines - 2007-2013 - Spoilers and Bodykits Australia

Cold Air Intake MAFLESS Kit to suit VE V8 6.0 & 6.2L Engines - 2007-2013

$769.00

Cold Air Intake MAFLESS Kit to suit VE V8 6.0 & 6.2L Engines - 2007-2013 >>> The VE Holden owner’s most popular choice when it comes to Over The Radiator Cold Air Intakes <<< If you're looking for a Cold Air Intake MAFLESS Kit to suit VE V8 6.0 & 6.2L Engines - 2007-2013 then this is the one for you. More POWER, Increased PERFORMANCE & Better ECONOMY is what is achieved by installing one of these V6 Orssom Performance Cold Air Intakes. Suits all Holden VE SS and SSV V8 Commodores including the Holden HSV variants fitted with the 6.0 and 6.2 litre LS2 and LS3 engines, L76 – L77 – L98. Here's what you get in this Cold Air Intake Kit: Top Intake Cover Lower Filter Housing K&N Air Filter re-washable ( Part No 33-2640 ) 1 Airflow Meter Seal 1 x Rubber Bellow 1 x Hose Clamp 3 x Speed Clips 3 x Phillips Head Screws 1 x 10mm Length Vacuum Breather Hose 1 x Right Angle Breather Pipe ( Optional use on some models Only ) Fitting Instructions And the great thing about these Cold Air Intakes are: NO laying back of radiator to fit the intake NO cutting or lengthening of any electrical wires NO cutting of any body panels to fit intake NO removing bumper bars to clean or replace air filters MAF fitment, (Must be fitted with the factory Air Flow Meter) Can be installed in about 30 minutes 12 months Manufacturers Replacement Warranty from purchase date, against faulty manufacturing (Failure to follow fitting instructions procedure will void warranty). You and your pride and joy are going to love the: Cooler air intake temperatures Increased air flow to your engine Increase in power and torque Excellent throttle response Improvement to your fuel economy Awesome induction sound OEM style for that stealth under bonnet appearance *** This kit does not include the Airflow Sensor, you MUST use your original factory unit *** Disclaimer: Orssom Performance Products are designed for off road use only. CAI Pty LTD & Conrod Motorsport Pty Ltd T/A Orssom Performance, accept no responsibility nor will be held liable for any damages caused to Vehicle engines / Vehicles / Property / Lose of life / Injury or Injury to others, as a result of fitment of these products. Please consider carefully if this product is for you before purchasing. Follow us on Facebook HERE to stay up to date with Sales, New parts and all the goss in the bodykits world!

Carbon Fibre Rear Boot Wing Spoiler for Subaru WRX STI VA Sedan - STI Style (2015 - 2021) - Spoilers And Bodykits Australia

Carbon Fibre Rear Boot Wing Spoiler for Subaru WRX STI VA Sedan - STI Style (2015 - 2021)

$799.00

Carbon Fibre Rear Boot Wing Spoiler for Subaru WRX STI VA Sedan - STI Style (2015 - 2021) If you're looking for a Carbon Fibre Rear Boot Wing Spoiler for Subaru WRX STI VA Sedan then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style! Carbon Fibre Rear Boot Wing Spoiler for Subaru WRX STI VA Sedan - STI Style (2015 - 2021) Give the rear of your WRX a whole new look with this TOUGH looking boot spoiler! Spoiler made of high quality real carbon fibre with gloss black plastic mounting feet Coated in a clear glossy anti-UV durable finish Easy fitment (Fitments and drilling template included. Drilling required) Custom designed to suit this model Tough look plus increases your cars value Shipping Australia Wide Order for your ride now

Carbon Fibre Rear Boot Wing Spoiler for CJ Mitsubishi Lancer EVO VRX Sedan - EVO X Style (2007 - 2018) - Spoilers And Bodykits Australia

Carbon Fibre Rear Boot Wing Spoiler for CJ Mitsubishi Lancer EVO / VRX Sedan - EVO X Style (2007 - 2018)

$779.00

Carbon Fibre Rear Boot Wing Spoiler for CJ Mitsubishi Lancer EVO / VRX Sedan - EVO X Style (2007 - 2018) If you're looking for a Carbon Fibre Rear Boot Wing Spoiler for CJ Mitsubishi Lancer EVO / VRX Sedan then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style! Carbon Fibre Rear Boot Wing Spoiler for CJ Mitsubishi Lancer EVO / VRX Sedan - EVO X Style (2007 - 2018) Give the rear of your Lancer a whole new look with this TOUGH looking boot spoiler! Made of high quality real carbon fibre Coated in a clear glossy anti-UV durable finish Easy fitment (Fitment bolts not included) Custom designed to suit this model Tough look plus increases your cars value Shipping Australia Wide Order for your ride now

Front Lower Bumper Bar Lip for R33 Nissan Skyline GTR - Series 3 Style (1995 - 1998) - Spoilers And Bodykits Australia

Front Lower Bumper Bar Lip for R33 Nissan Skyline GTR - Series 3 Style (1995 - 1998)

$1,129.00

Front Lower Bumper Bar Lip for R33 Nissan Skyline GTR - Series 3 Style (1995 - 1998) If you're looking for a Front Lower Bumper Bar Lip for R33 Nissan Skyline GTR then this is the one for you. Tough look, plus tough construction. Give your car that aftermarket look and style! Front Lower Bumper Bar Lip for R33 Nissan Skyline GTR - Series 3 Style (1995 - 1998) Give the front of your Skyline a whole new look with this TOUGH looking lower lip! Fits 1995 - 1998 R33 Nissan Skyline GTR models Made of high quality PP plastic Matt black in colour Easy fitment - Meant to be attached to the bottom of the standard front bumper with urethane & small screws (Not supplied) (Drilling required) High quality durable finish Custom designed to suit this model Tough look plus increases your cars value Shipping Australia Wide Scroll up and Order Now

Left Passenger Side LED Tail Light for Isuzu D-MAX - Tinted Red (09/2014 - 2019)

$139.00

Left Passenger Side LED Tail Light for Isuzu D-MAX - Tinted Red (09/2014 - 2019) Looking for a reliable aftermarket replacement part for your vehicle? You've come to the right place. Whether your existing component is damaged, showing signs of wear, or you’re simply looking to upgrade your ride, this high quality part is designed to deliver performance and durability you can count on. Left Passenger Side LED Tail Light for Isuzu D-MAX - Tinted Red (09/2014 - 2019) Brand new aftermarket part Red / Tinted lens Ready to install No fitting instructions provided - A qualified licensed professional is recommended for installation Strong build quality Shipping Australia Wide

192 193 194 195 196

Fast Local Dispatch

Tracked Shipping on Every Order

Easy 30 Day Returns

Free Returns on Faulty Items

Ph: 1300 362 376

Mon-Fri | 9am-5pm

Email: sales@spoilersandbodykits.com.au

✅ 28,000+ Orders Shipped Australia-Wide

✅ Serving Aussie Drivers since 2016

✅ Aussie-Owned & Operated

CATEGORIES Bodykit Parts Accessories Lighting Suspension Parts Steering Parts Engine Bay Parts Interior Parts Intake & Exhaust Parts Drivetrain Parts Body Parts Fuel System Parts Brake Parts Electrical Parts Climate Control Parts

INFO & SUPPORT FAQ's About Us Contact Us Shipping Customer Reviews Why Shop With Us Buy Now Pay Later Basic Fitting Guides Bundle Deals Become an Ambassador Earn Rewards Returns Terms & Conditions Privacy Policy

GET SOCIAL Follow us on Facebook