Products – Page 239 – Spoilers and Bodykits

Front Lower Control Arms with Ball Joints for Toyota Camry ACV36R / MCV36R (2002 - 2006)-Spoilers and Bodykits Australia

Front Lower Control Arms with Ball Joints for Toyota Camry ACV36R / MCV36R (2002 - 2006)

$159.00

Front Lower Control Arms with Ball Joints for Toyota Camry ACV36R / MCV36R (2002 - 2006) Restore your Camry’s suspension performance with this complete front lower control arm set. Designed as a direct replacement, it includes left and right arms with pre-installed ball joints and rubber bushings for durability, stability, and a smoother ride. Front Lower Control Arms with Ball Joints for Toyota Camry ACV36R / MCV36R (2002 - 2006) Brand new aftermarket replacement part Pre-fitted with premium ball joints and high-quality rubber bushings Dimension: 57 × 38 × 11cm Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Front Upper Adjustable Control Arms for Jeep Grand Cherokee WJ (1999 - 2004)-Spoilers and Bodykits Australia

Front Upper Adjustable Control Arms for Jeep Grand Cherokee WJ (1999 - 2004)

$169.00

Front Upper Adjustable Control Arms for Jeep Grand Cherokee WJ (1999 - 2004) These front upper adjustable control arms are built to handle lifted suspension setups while maintaining ride comfort and proper geometry. Strong, precise, and durable, they are ideal for restoring alignment and stability on lifted Jeep Grand Cherokee WJ models. Front Upper Adjustable Control Arms for Jeep Grand Cherokee WJ (1999 - 2004) Brand new aftermarket replacement part Designed for lifted ride heights from 0–8" Adjustable eye-to-eye length range: 360–455mm Constructed from high tensile strength carbon steel Premium polyurethane bushings for durability and reduced vibration Durable powder-coated finish for superior corrosion resistance Bushing inner diameter: 14mm (with 2 spare sleeves at 11mm included) Dimensions: 68 × 19 × 12cm Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Rear Upper Adjustable Camber Control Arms for Honda CRV-Spoilers and Bodykits Australia

Rear Upper Adjustable Camber Control Arms for Honda CRV

$129.00

Rear Upper Adjustable Camber Control Arms for Honda CRV Fine-tune your suspension setup with these rear upper adjustable camber control arms, designed to improve handling and extend tyre life on Honda CRV models. Built from durable steel with a powder-coated finish and fitted with hard rubber bushings, they provide reliable performance and easy on-car adjustment. Rear Upper Adjustable Camber Control Arms for Honda CRV Brand new aftermarket replacement part Adjustable camber range: -2° to +4° Easy turnbuckle-style adjustment without removing arms from the vehicle Constructed from strong steel with a corrosion-resistant powder-coated finish Hard rubber bushings deliver a more direct driving feel and stability Helps eliminate premature tyre wear caused by negative camber when lowering Set includes 2 arms (pair) Package dimensions: 41.2 × 16.7 × 11.5cm Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Adjustable Rear Lower Control Arms for Jeep Grand Cherokee WJ (1999 - 2004)-Spoilers and Bodykits Australia

Adjustable Rear Lower Control Arms for Jeep Grand Cherokee WJ (1999 - 2004)

$199.00

Adjustable Rear Lower Control Arms for Jeep Grand Cherokee WJ (1999 - 2004) Upgrade the suspension of your Jeep Grand Cherokee WJ with these adjustable rear lower control arms. Designed for strength and precision, they provide improved handling, suspension geometry, and long-lasting durability on and off the road. Adjustable Rear Lower Control Arms for Jeep Grand Cherokee WJ (1999 - 2004) Brand new aftermarket replacement part Adjustable length range: 16.9" to 20.47" (0–3.5" adjustment) Made from high-strength steel with a durable powder-coated finish Improves suspension geometry to reduce bump steer and enhance handling Helps prevent premature tire wear Suitable for street driving, track use, drift, and off-road applications Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Front Upper Adjustable Control Arms for Jeep Wrangler TJ (1997 - 2006) & Cherokee XJ-Spoilers and Bodykits Australia

Front Upper Adjustable Control Arms for Jeep Wrangler TJ (1997 - 2006) & Cherokee XJ

$189.00

Front Upper Adjustable Control Arms for Jeep Wrangler TJ (1997 - 2006) & Cherokee XJ Upgrade your Jeep’s suspension with these front upper adjustable control arms, designed to improve geometry, handling, and durability. Built from high-strength steel with a powder-coated finish, they provide precise adjustment for lifted or modified setups, ensuring stability both on and off-road. Front Upper Adjustable Control Arms for Jeep Wrangler TJ (1997 - 2006) & Cherokee XJ Brand new aftermarket replacement part Powder-coated finish for corrosion resistance and long service life Adjustable design to improve suspension geometry and reduce bump steer Enhances handling, steering response, and tyre wear prevention Suitable for street, track, drift, and off-road use Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: Jeep Wrangler TJ (1997–2006) Jeep Cherokee XJ (1984–2001) Jeep Grand Cherokee ZJ (1993–1998) Jeep Grand Cherokee WJ (1999–2004)

Front & Rear Control Arms for Porsche 911 / Boxster-Spoilers and Bodykits Australia

Front & Rear Control Arms for Porsche 911 / Boxster

$119.00

Front & Rear Control Arms for Porsche 911 / Boxster Upgrade your Porsche’s suspension with these replacement control arms, designed to restore handling precision and improve suspension geometry for enhanced performance and stability. Front & Rear Control Arms for Porsche 911 / Boxster Brand new aftermarket replacement part Designed to improve suspension geometry by increasing camber gain and enhancing roll camber Provides smoother wheel travel and improved steering response Built to correct alignment geometry and reduce stress compared to factory units Compatible with part number(s): 99733105301, 99733105302, 99733105303 Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Front Upper Adjustable Control Arms for Jeep TJ / LJ / XJ / MJ-Spoilers and Bodykits Australia

Front Upper Adjustable Control Arms for Jeep TJ / LJ / XJ / MJ

$179.00

Front Upper Adjustable Control Arms for Jeep TJ / LJ / XJ / MJ These front upper adjustable control arms are engineered for strength and precision, making them ideal for lifted Jeep setups. Constructed from high tensile strength carbon steel with polyurethane bushings, they provide improved handling, reduced bump steer, and long-lasting durability on and off-road. Front Upper Adjustable Control Arms for Jeep TJ / LJ / XJ / MJ Brand new aftermarket replacement part Durable powder-coated finish for superior corrosion resistance Premium polyurethane bushings for improved performance and extended service life Enhances suspension geometry to reduce bump steer and premature tyre wear Suitable for street, off-road, track, or drift applications Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: Jeep Wrangler TJ (1997–2006) Jeep Cherokee XJ (1984–2001) Jeep Grand Cherokee ZJ (1993–1998) Jeep Grand Cherokee WJ (1999–2004)

Rear Upper & Lower Control Arms with Ball Joints for Jeep Grand Cherokee WJ (1999 - 2004)-Spoilers and Bodykits Australia

Rear Upper & Lower Control Arms with Ball Joints for Jeep Grand Cherokee WJ (1999 - 2004)

$419.00

Rear Upper & Lower Control Arms with Ball Joints for Jeep Grand Cherokee WJ (1999 - 2004) Restore stability and handling to your Jeep Grand Cherokee with this complete rear suspension control arm kit, designed as a direct-fit replacement with pre-assembled bushings and ball joints for easy installation. Rear Upper & Lower Control Arms with Ball Joints for Jeep Grand Cherokee WJ (1999 - 2004) Brand new aftermarket replacement part Original bolts must be reused during installation Package dimensions: 86 x 49 x 12 cm Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Package Contents: 1x Rear Upper Control Arm 1x Rear Upper Ball Joint 2x rear lower control arm

Front Upper Control Arms & Lower Wishbones for Mercedes Benz CLK Class-Spoilers and Bodykits Australia

Front Upper Control Arms & Lower Wishbones for Mercedes Benz CLK Class

$289.00

Front Upper Control Arms & Lower Wishbones for Mercedes Benz CLK Class Refresh your suspension with this complete front control arm and wishbone kit for Mercedes Benz CLK models. Designed for strength, precision, and long service life, this set includes both upper and lower control arms plus anti-roll bar drop links for a direct replacement solution. Front Upper Control Arms & Lower Wishbones for Mercedes Benz CLK Class Brand new aftermarket replacement part Sealed design for longevity and maintenance-free use Precision-machined to stringent tolerances for accurate fitment Black oxide and anodised surface treatment for enhanced corrosion resistance Full ball metal stud allows 360° smooth rotation for more responsive steering Rust-protected finish for extended service life Package dimensions: 42 × 29 × 14cm Compatible with part number(s): 203330011, 203330161, 2033303511, 203330391, 204330331, 2043304311, A203330011, A2033303911, A204330431, CMS10107, CMS10130, GS10130, MS101071, MS10130, RK620086, RK621955 Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: Mercedes-Benz C-Class W203 (2000–2007): Saloon Mercedes-Benz C-Class CL203 (2001–2008): Coupe Mercedes-Benz C-Class T-Model S203 (2001–2007): Estate Mercedes-Benz CLC-Class CL203 (2008–2011): Coupe Mercedes-Benz CLK A209 (2003–2010): Convertible Mercedes-Benz CLK C209 (2002–2009): Coupe

Rear Upper & Lower Trailing Control Arms for Nissan Pathfinder / QX4-Spoilers and Bodykits Australia

Rear Upper & Lower Trailing Control Arms for Nissan Pathfinder / QX4

$229.00

Rear Upper & Lower Trailing Control Arms for Nissan Pathfinder / QX4 Restore handling and stability with this complete rear trailing control arm set for Nissan Pathfinder and Infiniti QX4. Built from high-strength steel with a durable powder-coated finish, this kit includes both upper and lower arms with pre-installed bushings for a direct replacement upgrade. Rear Upper & Lower Trailing Control Arms for Nissan Pathfinder / QX4 Brand new aftermarket replacement part Includes new rubber and 20# steel bushings for long service life Made from high-strength steel with powder-coated finish for durability and corrosion resistance Improves suspension geometry, reduces bump steer, and prevents premature tyre wear Enhances rear stability, handling, and ride comfort Package dimensions: 99 × 16 × 16cm Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Adjustable Rear Camber Control Arms for BMW E36 / E46 3 Series / X3 / Z4-Spoilers and Bodykits Australia

Adjustable Rear Camber Control Arms for BMW E36 / E46 3 Series / X3 / Z4

$119.00

Adjustable Rear Camber Control Arms for BMW E36 / E46 3 Series / X3 / Z4 This replacement turbo cartridge (CHRA) is designed to restore boost performance and reliability in Toyota Hilux and Prado models fitted with the 1KD-FTV 3.0L D4D diesel engine. Built for direct fitment, it offers a cost-effective solution to get your vehicle running at its best again. Adjustable Rear Camber Control Arms for BMW E36 / E46 3 Series / X3 / Z4 Brand new aftermarket replacement part Adjustable eye-to-eye length: 525–570mm (20.67"–22.44") Camber adjustment range: -1.0° to +3.0° Powder-coated finish for durability and corrosion resistance Rubber bushings ensure smooth ride comfort Bushing dimensions: Inner Ø12mm, width 55.5mm | Outer Ø32mm, width 32mm Includes M18×1.5 nuts for secure fitment Weight: 3.85kg per set Package dimensions: 62 × 13 × 8cm Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: BMW E36 (3-Series, 1992–1998): 318i, 318is, 318ic, 320i, 323i, 323ic, 323is, 325i, 325is, 325ic, 328i, 328is, 328ic, M3 (will not fit 318ti) BMW E46 (3-Series, 1999–2005): 320i, 323i, 323ci, 323cic, 325i, 325ci, 325cic, 325xi, 328i, 328ci, 328cic, 330i, 330ci, 330cic, M3 BMW E83 (X3, up to 2010): 2.5i, 2.5si, 3.0i, 3.0si BMW E85 & E86 (Z4): 2.5i, 2.5si, 3.0i, 3.0si, M-Roadster (will not fit M-Coupe) BMW E89 (Z4, 2009–present): 30i, 35i, 35is

Adjustable Rear Lower Control Arms for BMW E36 / E46 / E83 / E85 / E86 / E89-Spoilers and Bodykits Australia

Adjustable Rear Lower Control Arms for BMW E36 / E46 / E83 / E85 / E86 / E89

$109.00

Adjustable Rear Lower Control Arms for BMW E36 / E46 / E83 / E85 / E86 / E89 These adjustable rear lower control arms are designed to replace worn factory units and provide precise camber adjustment, improving suspension geometry and handling performance for BMW models. Adjustable Rear Lower Control Arms for BMW E36 / E46 / E83 / E85 / E86 / E89 Brand new aftermarket replacement part Manufactured from strong steel with durable rubber bushings for smooth ride comfort Powder-coated finish for corrosion resistance Adjustable eye-to-eye length: 525–570mm Camber adjustment: -1.0° to +3.0° Bushing dimensions: Inner Ø 12mm / width 55.5mm Bushing dimensions: Outer Ø 32mm / width 32mm Includes M18x1.5 nuts for installation Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Adjustable Rear Lower Control Arms for Mini Cooper R50 / R52 / R53 (2002 - 2013)-Spoilers and Bodykits Australia

Adjustable Rear Lower Control Arms for Mini Cooper R50 / R52 / R53 (2002 - 2013)

$99.00

Adjustable Rear Lower Control Arms for Mini Cooper R50 / R52 / R53 (2002 - 2013) Upgrade your Mini’s suspension with these adjustable rear lower control arms, designed to improve handling, alignment accuracy, and camber adjustability for both street and performance driving. Adjustable Rear Lower Control Arms for Mini Cooper R50 / R52 / R53 (2002 - 2013) Brand new aftermarket replacement part Placement on vehicle: Rear, left and right, lower position Manufactured from strong steel with durable rubber bushings Powder-coated surface finish for corrosion resistance and long service life Adjustable eye-to-eye length: 511–571mm Overall length: 554–614mm Provides camber adjustment capability of +/- 4 degrees Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Adjustable Rear Lower Camber Control Arms for BMW E36 / E46 / E83 / E85 / E86 / E89-Spoilers and Bodykits Australia

Adjustable Rear Lower Camber Control Arms for BMW E36 / E46 / E83 / E85 / E86 / E89

$119.00

Adjustable Rear Lower Camber Control Arms for BMW E36 / E46 / E83 / E85 / E86 / E89 Upgrade your BMW’s suspension setup with these adjustable rear lower camber control arms. Built from durable steel with rubber bushings and a powder-coated finish, they replace worn factory arms while allowing precise camber adjustment for improved handling and tyre wear. Adjustable Rear Lower Camber Control Arms for BMW E36 / E46 / E83 / E85 / E86 / E89 Brand new aftermarket replacement part Eye-to-eye adjustable length range: 525–570mm (20.67"–22.44") Camber adjustment range: -1.0° to +3.0° for fine-tuned suspension geometry Powder-coated finish for corrosion resistance and durability Rubber bushings provide smooth ride quality and reduced NVH Weight: 4.1kg per set Package dimensions: 62 × 13 × 9cm Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: BMW E36 (3-Series, 1992–1998): 318i, 318is, 318ic, 323i, 323ic, 323is, 325i, 325is, 325ic, 328i, 328is, 328ic, M3 (will not fit 318ti) BMW E46 (3-Series, 1999–2005): 323i, 323ci, 323cic, 325i, 325ci, 325cic, 325xi, 328i, 328ci, 328cic, 330i, 330ci, 330cic, M3 BMW E83 (X3, up to 2010): 2.5i, 2.5si, 3.0i, 3.0si BMW E85 & E86 (Z4): 2.5i, 2.5si, 3.0i, 3.0si, M-Roadster (will not fit M-Coupe) BMW E89 (Z4, 2009–present): 30i, 35i, 35is

Forged Connecting Rods with ARP Bolts for Mitsubishi 3000GT 6G72-Spoilers and Bodykits Australia

Forged Connecting Rods with ARP Bolts for Mitsubishi 3000GT 6G72

$899.00

Forged Connecting Rods with ARP Bolts for Mitsubishi 3000GT 6G72 These forged H-beam connecting rods are engineered for strength and precision, making them the ideal choice for high-performance Mitsubishi 3000GT 6G72 builds where reliability under extreme horsepower and RPM is essential. Forged Connecting Rods with ARP Bolts for Mitsubishi 3000GT 6G72 Brand new aftermarket replacement part Manufactured from SAE 4340 aircraft-grade chrome moly steel for racing durability Fitted with genuine ARP 2000 3/8" bolts rated at 220,000–230,000 PSI (optional upgrade to ARP L19 bolts available) Center-to-center length: 141mm Big end diameter: 52.98mm Small end diameter: 22mm Big end width: 20.83mm Small end width: 20.88mm Designed to handle 600–800HP with reliable operation up to 9000rpm Balanced to within +/- 1 gram per set for consistent performance CNC machined with SUNNEN-honed big and small ends for precise fitment Bronze bushings included for floating piston pins Multi-stage heat treated and shot peened to relieve stress Precision alignment sleeves eliminate cap walk and maintain bore size 100% X-rayed, sonic tested, and magnafluxed to ensure flaw-free construction TÜV certified for quality and safety standards Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Forged 4340 H-Beam Steel Connecting Rods with ARP Bolts for BMW B48 2.0T 800HP-Spoilers and Bodykits Australia

Forged 4340 H-Beam Steel Connecting Rods with ARP Bolts for BMW B48 2.0T 800HP

$799.00

Forged 4340 H-Beam Steel Connecting Rods with ARP Bolts for BMW B48 2.0T 800HP Designed for strength and precision, these forged H-beam connecting rods are built to handle the demands of high-performance BMW B48 2.0T engines. Manufactured from 4340 chrome moly steel and equipped with ARP fasteners, they ensure reliability under extreme horsepower and high-RPM conditions. Forged 4340 H-Beam Steel Connecting Rods with ARP Bolts for BMW B48 2.0T 800HP Brand new aftermarket replacement part Forged from SAE 4340 aircraft-grade chrome moly steel for racing durability H-beam design offers high strength with reduced weight Set includes 4 connecting rods (complete 4-cylinder set) Supplied with ARP 2000 3/8" bolts (rated 220,000 PSI) – upgrade option available to ARP L19 (260,000 PSI) at extra cost Advertised horsepower rating: 200HP per rod (up to 800HP per set) Capable of sustained operation up to 9000rpm CNC machined with precision rod cap alignment dowels Bores finished to within +/- 0.005mm Balanced to within +/- 1 gram per rod for consistent performance Heat treated, shot peened, and magnetic particle tested to ensure flaw-free strength Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: BMW 1 Series F20 (2010–2018) Hatchback – 120i BMW 2 Series F22 (2012–2018) Coupe – 220i BMW 5 Series G30 (2016–2018) Saloon – 520i BMW 7 Series G11/G12 (2015–2018) Saloon – 730i, Li; 740e, Le xDrive BMW X1 F48 (2014–2018) Estate – xDrive 25i, xDrive 20i BMW X2 F39 (2017–2018) SUV – sDrive 20i, xDrive 30i BMW X4 G02 (2018) SUV – xDrive 30i

Connecting Rods Kit for BMW M30 L6 M30B35 Big 6 Engine-Spoilers and Bodykits Australia

Connecting Rods Kit for BMW M30 L6 M30B35 Big 6 Engine

$899.00

Connecting Rods Kit for BMW M30 L6 M30B35 Big 6 Engine Built to handle high horsepower and extreme RPMs, these forged H-beam connecting rods are the ultimate upgrade for the BMW M30B35 “Big 6” engine, combining strength, precision, and racing durability. Connecting Rods Kit for BMW M30 L6 M30B35 Big 6 Engine Brand new aftermarket replacement part Manufactured from SAE 4340 aircraft-grade chrome moly steel for maximum strength and reliability Fitted with ARP 2000 3/8" bolts rated at 220,000 PSI (optional upgrade to ARP L19 bolts rated at 260,000 PSI) Center-to-center length: 135mm Big end diameter: 52mm Small end diameter: 22mm Big end width: 23.876mm Small end width: 23.88mm Designed to support up to 200HP per rod with reliable operation up to 9000rpm TÜV tested and TÜV ISO 9001 certified CNC machined with precision rod cap alignment dowels for consistent fitment Heat-treated, shot-peened, and stress-relieved for long-lasting durability Bores finished to +/- 0.005mm tolerance and balanced within +/- 1 gram per rod 100% X-rayed, sonic tested, and magnetic particle inspected to ensure flaw-free construction Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

H-Beam 4340 EN24 Connecting Rods for Audi B7 A4 / B8 A4 / Q7 / C6 A6 / D3 A8 & Volkswagen Touareg 3.0T Supercharged-Spoilers and Bodykits Australia

H-Beam 4340 EN24 Connecting Rods for Audi B7 A4 / B8 A4 / Q7 / C6 A6 / D3 A8 & Volkswagen Touareg 3.0T Supercharged

$1,129.00

H-Beam 4340 EN24 Connecting Rods for Audi B7 A4 / B8 A4 / Q7 / C6 A6 / D3 A8 & Volkswagen Touareg 3.0T Supercharged Built for high-performance racing and demanding applications, these H-beam forged connecting rods are precision engineered for Audi and Volkswagen 3.0T engines. Manufactured from 4340 EN24 chrome moly steel and fitted with ARP fasteners, they provide maximum strength, reliability, and balance at high RPM. H-Beam 4340 EN24 Connecting Rods for Audi B7 A4 / B8 A4 / Q7 / C6 A6 / D3 A8 & Volkswagen Touareg 3.0T Supercharged Brand new aftermarket replacement part Center-to-center length: 153mm Big end diameter: 58.85mm | Small end diameter: 22mm (taper) Big end width: 20.10mm | Small end width: 20.10mm Equipped with ARP 2000 5/16" bolts (rated 220,000+ PSI) – optional upgrade to ARP L19 available at extra cost CNC machined, SUNNEN-honed, and precision aligned to eliminate cap walk Balanced to within +/- 1 gram per set for consistent high-RPM performance Heat treated, shot peened, X-rayed, sonic tested, and magnafluxed for stress relief and flaw detection TÜV certified component for assured quality Power rating: 600–800hp per set, capable of 7000rpm operation Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: Audi: 3.0L TFSI Supercharged DOHC V6 – B7 A4, B8 A4, Q7, C6 A6, D3 A8 Volkswagen: 3.0 DOHC V6 TDI – Phaeton, Touareg

Forged Connecting Rods with ARP Bolts for Toyota Corolla 2TC / 3TC Engine 4.835

$719.00

Forged Connecting Rods with ARP Bolts for Toyota Corolla 2TC / 3TC Engine 4.835 Engineered for performance and reliability, these forged H-beam connecting rods are designed for Toyota Corolla 2TC and 3TC engines. Made from premium 4340 chrome moly steel and fitted with ARP 2000 bolts, they deliver exceptional strength for high-revving and racing applications. Forged Connecting Rods with ARP Bolts for Toyota Corolla 2TC / 3TC Engine 4.835 Brand new aftermarket replacement part H-beam design for reduced weight while maintaining high strength Center-to-center length: 122.81mm (4.835") Big end diameter: 51.01mm (2.008") | Small end diameter: 22mm (0.866") Big end width: 26.75mm (1.053") | Small end width: 26.75mm (1.053") Set includes 4 connecting rods (complete 4-cylinder set) Supplied with ARP 2000 3/8" bolts (rated 220,000 PSI) – upgrade option available to ARP L19 (260,000 PSI) at extra cost Balanced to within +/- 1 gram per rod for consistent performance Heat treated, shot peened, and CNC machined for strength and precision Precision rod cap alignment dowels and bores finished to +/- 0.005mm Magnetic particle tested and TÜV ISO 9001 certified for quality assurance Advertised horsepower rating: 200HP per rod Capable of sustained operation up to 9000rpm Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Forged H-Beam Connecting Rods for Honda Civic / Integra D16 / ZC / D16Z6 / D16A6-Spoilers and Bodykits Australia

Forged H-Beam Connecting Rods for Honda Civic / Integra D16 / ZC / D16Z6 / D16A6

$799.00

Forged H-Beam Connecting Rods for Honda Civic / Integra D16 / ZC / D16Z6 / D16A6 Designed for high-performance Honda D-series builds, these forged H-beam connecting rods deliver the strength, precision, and reliability needed for turbocharged or high-revving naturally aspirated setups. Forged H-Beam Connecting Rods for Honda Civic / Integra D16 / ZC / D16Z6 / D16A6 Brand new aftermarket replacement part Manufactured from SAE 4340 aircraft-grade chrome moly steel for maximum durability Fitted with ARP 2000 3/8" bolts rated at 220,000 PSI (optional upgrade to ARP L19 bolts rated at 260,000 PSI) Center-to-center length: 137mm Big end diameter: 48mm Small end diameter: 19mm Big end width: 22.8mm Small end width: 18.2mm Designed to support up to 200HP per rod with reliable operation up to 9000rpm TÜV tested and TÜV ISO 9001 certified CNC machined with precision rod cap alignment dowels for consistent fitment Heat-treated, shot-peened, and stress-relieved to eliminate weak points Bores finished to +/- 0.005mm tolerance and balanced within +/- 1 gram per rod 100% X-rayed, sonic tested, and magnetic particle inspected for flaw-free construction Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: Acura Integra (USA) 1986–1989 Acura Integra (Australia) 1986–1989 Honda Civic Si, CRX Si 1988–1991 Honda Civic EX (4dr), Civic Wagon RT4WD 1990–1991 Honda Civic GTi (New Zealand) 1988–1991 Honda Civic (Europe, ED4, ED7) 1988–1989 Honda Civic (New Zealand, EG4) 1995 Honda Civic (South Africa) 1988–1995 Honda Civic GX 1998–2000 Honda Civic HX 1996–2000 Honda Civic EX (Sedan, Peruvian version) 1996 Honda Civic VTi 1996–2000 Honda Civic Si 1992–1995 Honda Civic EX, EX-V 1992–1995 Honda Civic ESi (Europe) 1992–1995 Honda Del Sol Si (US) 1993–1995 Honda Del Sol ESi (Europe) 1993–1996 Honda Civic RTSi 1992–1995 Honda Civic EX Coupé 1996–2000 Honda Civic Ferio EJ3 (JDM) 1991–1993 Honda Civic EJ1 (JDM) 1992–1995 Honda Domani MA4 (JDM) 1992–1995 Honda Del Sol Si 1993–1997

Connecting Rods for Nissan Skyline R32 / R33 / R34 GT-R RB26DETT 2.6L / RB28DETT 2.8L 119.5mm-Spoilers and Bodykits Australia

Connecting Rods for Nissan Skyline R32 / R33 / R34 GT-R RB26DETT 2.6L / RB28DETT 2.8L 119.5mm

$879.00

Connecting Rods for Nissan Skyline R32 / R33 / R34 GT-R RB26DETT 2.6L / RB28DETT 2.8L 119.5mm These high-performance H-Beam connecting rods are designed for Nissan Skyline GT-R RB26DETT 2.6L and RB28DETT 2.8L engines. Manufactured from premium 4340 aircraft-grade forged steel and equipped with ARP bolts, they deliver exceptional durability and strength under extreme horsepower and RPM conditions, making them ideal for racing and high-boost turbo applications. Connecting Rods for Nissan Skyline R32 / R33 / R34 GT-R RB26DETT 2.6L / RB28DETT 2.8L 119.5mm Brand new aftermarket replacement part H-beam design with a 119.5mm center-to-center length Big end diameter: 51mm | Small end diameter: 21mm | Widths: 21.8mm Includes 6 pieces (full engine set) Equipped with ARP 2000 3/8" bolts (upgrade option available to ARP L19 at extra cost) Balanced to within +/- 1 gram per set for precise performance Features bronze bushings for floating piston pins Fully CNC machined, SUNNEN-honed, shot peened, and multi-stage heat treated for maximum reliability X-rayed, sonic tested, and magnafluxed for quality assurance TÜV certified component for added confidence Rated for 600hp–800hp with operating range up to 9000rpm Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Forged Connecting Rods with Bolts for Hyundai Kona / Elantra / i30 1.6L Gamma T-GDI-Spoilers and Bodykits Australia

Forged Connecting Rods with Bolts for Hyundai Kona / Elantra / i30 1.6L Gamma T-GDI

$799.00

Forged Connecting Rods with Bolts for Hyundai Kona / Elantra / i30 1.6L Gamma T-GDI These forged H-beam connecting rods are engineered for high-performance builds in Hyundai’s 1.6L Gamma T-GDI engines, providing the strength and precision needed for racing and high-boost applications. Forged Connecting Rods with Bolts for Hyundai Kona / Elantra / i30 1.6L Gamma T-GDI Brand new aftermarket replacement part Manufactured from SAE 4340 aircraft-grade chrome moly steel for maximum strength Fitted with ARP 2000 3/8" bolts rated at 220,000 PSI (optional upgrade to ARP L19 bolts rated at 260,000 PSI) Center-to-center length: 130.8mm Big end diameter: 45mm Small end diameter: 20mm Big end width: 18.9mm Small end width: 18.9mm Designed to support up to 200HP per rod with reliable operation up to 9000rpm TÜV tested and TÜV ISO 9001 certified CNC machined with precision rod cap alignment dowels for accurate fitment Heat-treated, shot-peened, and stress-relieved for long-lasting durability Bores finished to +/- 0.005mm tolerance and balanced to within +/- 1 gram per rod 100% X-rayed, sonic tested, and magnetic particle inspected for flaw-free construction Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

H-Beam Connecting Rods with ARP Bolts for Volkswagen Golf MK1 1.6L-Spoilers and Bodykits Australia

H-Beam Connecting Rods with ARP Bolts for Volkswagen Golf MK1 1.6L

$669.00

H-Beam Connecting Rods with ARP Bolts for Volkswagen Golf MK1 1.6L These forged H-Beam connecting rods are designed for Volkswagen Golf MK1 1.6L engines, providing the strength, precision, and durability required for performance and racing applications. Built from 4340 aircraft-grade steel and fitted with ARP fasteners, they are engineered to handle high horsepower and RPM with confidence. H-Beam Connecting Rods with ARP Bolts for Volkswagen Golf MK1 1.6L Brand new aftermarket replacement part Optional ARP L19 bolts available (260,000 psi, extra cost) Center to center length: 136mm Big end diameter: 49mm | Small end diameter: 22mm Weight balanced to within +/- 1 gram per set Piston pin bushings included, suitable for floating piston pins Precision CNC machined and SUNNEN-honed ends for exact bore sizing Cap alignment sleeves prevent cap walk and maintain big end stability Multi-stage heat treated, shot peened, and 100% tested (X-ray, sonic, magnaflux) Rated for 600–800 PS per set, capable of up to 9000 RPM Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

4340 EN24 H-Beam Connecting Rod with ARP Bolts for Ford Escort / Sierra Cosworth YB 133.58mm-Spoilers and Bodykits Australia

4340 EN24 H-Beam Connecting Rod with ARP Bolts for Ford Escort / Sierra Cosworth YB 133.58mm

$619.00

4340 EN24 H-Beam Connecting Rod with ARP Bolts for Ford Escort / Sierra Cosworth YB 133.58mm These forged H-Beam connecting rods are designed for Ford Escort and Sierra Cosworth YB engines, delivering exceptional strength, balance, and durability for high-performance racing applications. Manufactured from 4340 EN24 aircraft-grade steel, they are precision engineered to handle extreme horsepower and RPM. 4340 EN24 H-Beam Connecting Rod with ARP Bolts for Ford Escort / Sierra Cosworth YB 133.58mm Brand new aftermarket replacement part Set includes 4 H-Beam rods with genuine ARP 2000 3/8" bolts (220,000 psi rated) Optional ARP L19 bolts available (260,000 psi, extra cost) Center to center length: 133.58mm Big end diameter: 55mm | Small end diameter: 24mm Big end width: 25.9mm | Small end width: 25.9mm Weight balanced to within +/- 1 gram per set Precision CNC machined with SUNNEN-honed ends for accurate bore sizing Cap alignment sleeves maintain big end stability and eliminate cap walk Multi-stage heat treated and shot peened for stress relief Fully X-rayed, sonic tested, and magnaflux inspected for flaw-free construction Rated for 600–800 PS per set, capable of handling up to 9000 RPM Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

237 238 239 240 241

Fast Local Dispatch

Tracked Shipping on Every Order

Easy 30 Day Returns

Free Returns on Faulty Items

Ph: 1300 362 376

Mon-Fri | 9am-5pm

Email: sales@spoilersandbodykits.com.au

✅ 28,000+ Orders Shipped Australia-Wide

✅ Serving Aussie Drivers since 2016

✅ Aussie-Owned & Operated

CATEGORIES Bodykit Parts Accessories Lighting Suspension Parts Steering Parts Engine Bay Parts Interior Parts Intake & Exhaust Parts Drivetrain Parts Body Parts Fuel System Parts Brake Parts Electrical Parts Climate Control Parts

INFO & SUPPORT FAQ's About Us Contact Us Shipping Customer Reviews Why Shop With Us Buy Now Pay Later Basic Fitting Guides Bundle Deals Become an Ambassador Earn Rewards Returns Terms & Conditions Privacy Policy

GET SOCIAL Follow us on Facebook