Products – Page 242 – Spoilers and Bodykits

Forged Connecting Rods with ARP Bolts for MG MGB 5 Main Bearing-Spoilers and Bodykits Australia

Forged Connecting Rods with ARP Bolts for MG MGB 5 Main Bearing

$799.00

Forged Connecting Rods with ARP Bolts for MG MGB 5 Main Bearing These forged H-beam connecting rods are built for MG MGB engines with 5 main bearings, offering the precision, strength, and reliability needed for high-performance classic builds. Forged Connecting Rods with ARP Bolts for MG MGB 5 Main Bearing Brand new aftermarket replacement part Set of 4 forged H-beam rods made from SAE 4340 chrome moly steel Center-to-center length: 165.1mm Big end: 51.338mm diameter, 25.3mm width Small end: 20.62mm diameter, 25.4mm width Equipped with ARP 2000 3/8" bolts rated at 200,000+ psi – optional ARP L19 upgrade available Designed for engine outputs between 600–800hp per set and capable of 7000–9000rpm operation Balanced within +/- 1g per set for consistent performance CNC machined with precision alignment sleeves to maintain bore size and eliminate cap walk SUNNEN honed big and small ends for accuracy Bronze bushings included for floating piston pin applications Multi-stage heat treated, shot-peened, and tested by X-ray, sonic, and magnetic particle inspection Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

H-Beam Connecting Rods with ARP Bolts for Toyota Celica 3SGTE / MR2 Turbo 2.0L 3S-GTE-Spoilers and Bodykits Australia

H-Beam Connecting Rods with ARP Bolts for Toyota Celica 3SGTE / MR2 Turbo 2.0L 3S-GTE

$799.00

H-Beam Connecting Rods with ARP Bolts for Toyota Celica 3SGTE / MR2 Turbo 2.0L 3S-GTE These forged H-beam connecting rods are engineered for Toyota 3SGTE 2.0L turbocharged engines, delivering the strength and precision needed for high-performance street and racing builds. H-Beam Connecting Rods with ARP Bolts for Toyota Celica 3SGTE / MR2 Turbo 2.0L 3S-GTE Brand new aftermarket replacement part Forged from 4340 aircraft-grade chrome moly steel for superior durability H-beam design for optimal balance of strength and reduced weight Includes full set of 4 connecting rods Supplied with ARP 2000 3/8" bolts (rated at 220,000 psi) Optional upgrade available to ARP L19 bolts (rated at 260,000 psi) Advertised horsepower rating: 200 HP per rod Designed to withstand up to 9,000 RPM Center-to-center length: 138mm (5.433") Big end diameter: 51mm (2.008") Small end diameter: 22mm (0.866") Big end width: 26.8mm (1.055") Small end width: 23.5mm (0.925") Heat-treated, shot-peened, and CNC machined for accuracy and strength Precision rod cap alignment dowels for secure fitment Balanced to within +/- 1g per rod Magnetic particle tested, sonic tested, and X-rayed to ensure flaw-free construction Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Connecting Rods for BMW E36 / E46 328i / 325i 135mm-Spoilers and Bodykits Australia

Connecting Rods for BMW E36 / E46 328i / 325i 135mm

$1,129.00

Connecting Rods for BMW E36 / E46 328i / 325i 135mm Forged H-beam connecting rods designed for BMW E36 and E46 engines, built to handle high-performance and racing applications. Precision balanced and engineered for strength, they deliver reliability under high RPM and horsepower demands. Connecting Rods for BMW E36 / E46 328i / 325i 135mm Brand new aftermarket replacement part Supplied with genuine ARP 2000 3/8" bolts (rated at 220,000 psi) – optional ARP L19 fasteners available for upgrade (rated at 260,000 psi) H-beam design offers excellent strength while reducing unnecessary weight Heat-treated and shot-peened finish for improved fatigue resistance and stress relief High precision CNC machined with rod cap alignment dowels Bores finished to ±0.005 mm tolerance Balanced to within ±1 g per rod for consistent performance Each rod is magnetic particle inspected, X-rayed, and sonic tested for flawless construction Advertised horsepower rating: 200 HP per rod Safe for high RPM applications up to 9000 rpm Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: BMW 3 Series E36 (1990–2000) — 325i, 328i BMW 3 Series E46 (1998–2007) — 325i, 328i, 330i, 325Ci, 328Ci, 330Ci, 325xi, 328xi, 330xi BMW 5 Series E12 (1972–1981, Saloon) — 528i BMW 7 Series E38 (1994–2001, Saloon) — 728i, 728iL BMW Z3 E36 (1997–2003, Coupe) — 2.8i BMW Z3 E36 (1995–2003, Roadster Convertible) — 2.8i

Connecting Rods for Toyota Corolla / Celica 7AFE 1.8L-Spoilers and Bodykits Australia

Connecting Rods for Toyota Corolla / Celica 7AFE 1.8L

$799.00

Connecting Rods for Toyota Corolla / Celica 7AFE 1.8L These forged H-beam connecting rods are designed for Toyota 7AFE 1.8L engines, delivering exceptional strength and reliability for high-performance and racing applications. Connecting Rods for Toyota Corolla / Celica 7AFE 1.8L Brand new aftermarket replacement part Forged from 4340 aircraft-grade chrome moly steel for superior durability H-beam design provides lightweight strength for high-RPM use Set of 4 connecting rods included Supplied with ARP 2000 3/8" bolts (rated at 220,000 psi) Optional upgrade available to ARP L19 bolts (rated at 260,000 psi) Advertised horsepower rating: 200 HP per rod Capable of sustaining up to 9,000 RPM Center-to-center length: 132.5mm (5.217") Big end diameter: 51mm (2.008") Small end diameter: 20mm (0.787") Big end width: 21.8mm (0.858") Small end width: 21.8mm (0.858") Heat-treated, shot-peened, and CNC machined for consistent performance Precision rod cap alignment dowels for exact fitment Balanced to within +/- 1g per rod Magnetic particle tested, sonic tested, and X-rayed for flaw detection Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Forged Connecting Rods for VW Golf MK4 / Passat & Audi S3 / A3 / A4 / A6 / S4 / TT 1.8T / 2.0L-Spoilers and Bodykits Australia

Forged Connecting Rods for VW Golf MK4 / Passat & Audi S3 / A3 / A4 / A6 / S4 / TT 1.8T / 2.0L

$799.00

Forged Connecting Rods for VW Golf MK4 / Passat & Audi S3 / A3 / A4 / A6 / S4 / TT 1.8T / 2.0L High-performance forged H-beam connecting rods built to handle the demands of turbocharged VW and Audi engines. Designed for strength, balance, and reliability, they are the perfect upgrade for high-boost and racing applications. Forged Connecting Rods for VW Golf MK4 / Passat & Audi S3 / A3 / A4 / A6 / S4 / TT 1.8T / 2.0L Brand new aftermarket replacement part Manufactured from SAE 4340 aircraft-grade chrome moly steel for maximum durability Supplied with genuine ARP 2000 3/8" bolts (rated at 220,000 psi) – optional ARP L19 fasteners available for upgrade (rated at 260,000 psi) H-beam design provides maximum strength with reduced weight Heat-treated and shot-peened finish to eliminate stress risers and improve fatigue resistance 100% CNC machined with precision rod cap alignment dowels Bores finished to ±0.01 mm tolerance Balanced to within ±1 g per rod for consistent performance Each rod is magnetic particle tested, X-rayed, and sonic tested to ensure flaw-free construction Advertised horsepower rating: 200 HP per rod Safe for high RPM applications up to 9000 rpm Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: Audi TT 1.8T 225 BHP engines (BAM, AEB) Audi S3 210–225 BHP engines (BAM, AEB) Audi A3 1.8T (AGU, AQA) Audi A4 1.8T (AEB, ANB, APU, ARK) Audi A6 1.8T (AEB, ANB, APU, ARK) VW Bora 1.8T (AGU) VW Golf 1.8T GTi (AGU, ARZ) VW Passat 1.8T (AEB, ANB, ATW) VW Beetle 1.8T (AVC) Seat Ibiza 1.8T (AYP, AQX)

Connecting Rods for Mini Cooper S 1275cc 1.3L A Series (1964 - 1980)-Spoilers and Bodykits Australia

Connecting Rods for Mini Cooper S 1275cc 1.3L A Series (1964 - 1980)

$799.00

Connecting Rods for Mini Cooper S 1275cc 1.3L A Series (1964 - 1980) Forged performance connecting rods designed for the classic Mini Cooper S A-Series engines. Built to withstand high-revving applications, these rods deliver strength, precision, and reliability for both street and racing use. Connecting Rods for Mini Cooper S 1275cc 1.3L A Series (1964 - 1980) Brand new aftermarket replacement part Manufactured from SAE 4340 aircraft-grade chrome moly steel for superior strength and durability Supplied with genuine ARP 2000 5/16" bolts (rated at 220,000 psi) – optional ARP L19 fasteners available for upgrade (rated at 260,000 psi) H-beam design provides maximum strength with reduced weight Heat-treated and shot-peened finish for enhanced fatigue resistance and stress relief Precision CNC machined with rod cap alignment dowels for accuracy Bores finished to ±0.01 mm tolerance Balanced to within ±1 g per rod for consistent performance Each rod undergoes magnetic particle inspection, X-ray, and sonic testing to ensure flaw-free construction Advertised horsepower rating: 200 HP per rod Safe for high RPM applications up to 9000 rpm Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Connecting Rods with ARP Bolts for Alfa Romeo Nord 2000 157mm 4340 EN24-Spoilers and Bodykits Australia

Connecting Rods with ARP Bolts for Alfa Romeo Nord 2000 157mm 4340 EN24

$799.00

Connecting Rods with ARP Bolts for Alfa Romeo Nord 2000 157mm 4340 EN24 These forged H-beam connecting rods are engineered for Alfa Romeo Nord engines, offering the strength and precision needed for performance and turbocharged builds. Connecting Rods with ARP Bolts for Alfa Romeo Nord 2000 157mm 4340 EN24 Brand new aftermarket replacement part Set of 4 forged rods manufactured from SAE 4340 aircraft-grade chrome moly steel H-beam design for high strength-to-weight performance Equipped with ARP 2000 3/8" bolts rated at 220,000 psi – optional ARP L19 upgrade available Center-to-center length: 157mm (6.181") Big end: 53.7mm (2.114") diameter, 26.75mm (1.053") width Small end: 22mm (0.866") diameter, 23.7mm (0.933") width Floating pin piston design Rated for up to 200HP per rod and 9000rpm engine speeds Heat-treated, shot-peened, CNC machined, and balanced within +/- 1g per rod Precision finished with alignment dowels and tight bore tolerances Inspected through magnetic particle, sonic, and X-ray testing for reliability Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Forged 4340 Connecting Rods for Mazda MX5 Miata B6 / BP 1.6L / 1.8L-Spoilers and Bodykits Australia

Forged 4340 Connecting Rods for Mazda MX5 Miata B6 / BP 1.6L / 1.8L

$799.00

Forged 4340 Connecting Rods for Mazda MX5 Miata B6 / BP 1.6L / 1.8L High-performance forged connecting rods designed to handle the demands of racing and high-revving builds. Engineered for strength, balance, and reliability, they are the perfect upgrade for Mazda MX5 Miata B6 and BP engines. Forged 4340 Connecting Rods for Mazda MX5 Miata B6 / BP 1.6L / 1.8L Brand new aftermarket replacement part Manufactured from SAE 4340 aircraft-grade chrome moly steel for maximum strength and durability Fitted with genuine ARP 2000 5/16" bolts (rated at 220,000 psi) – optional ARP L19 fasteners available for upgrade (rated at 260,000 psi) H-beam design offers strength while reducing unnecessary weight Heat-treated and shot-peened finish to eliminate stress risers and improve fatigue resistance 100% CNC machined with precision rod cap alignment dowels Big end bores honed to ±0.01 mm tolerance Balanced to within ±1 g per rod for consistent performance Each rod undergoes magnetic particle testing, X-ray, and sonic inspection to ensure flaw-free construction Advertised horsepower rating: 200 HP per rod Safe for high RPM applications up to 7000 rpm Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: Mazda 323 BG / 323F BG models B6F 1989–1994 Mazda Miata / MX-5 B6 1.6 16-valve DOHC 1989–1993 Mazda Xedos 6 / Eunos 500 1.6L B6-9 / B6-E I4 1992–1999 Kia Mentor / Shuma / Spectra 1.6L B6 I4 1997–2003 Kia Rio First generation 1.6L B6 I4 (petrol) 1999–2005 Mazda Familia / 323 1.6L B6 I4 1985–1989 Ford Tonic GT-X Fifth Generation 1985–1989 Mazda Familia / 323 1.6L B6 I4 Sixth Generation 1989–1994 Mazda BP 1.8 Engine Mazda Familia GT (European & Australian Market) 1989–1994 Ford Laser KJ GLXi (Australian Market) 1994–1998 Mazda Artis “LX” VICS JM1 (North America Market) 1994–1998 Mazda Protege LX (with VICS) 1990–1994 Mazda Protege ES (Australian Market) 1995–1998 Mazda Infini 1990 Mazda Protege GT (Canadian Market) 1990–1991, 1993 Mazda 323 (European Market) 1990–1993 Ford Escort GT and LX-E 1991–1996 Mercury Tracer LTS 1991–1996 Kia Sephia RS, LS, GS 1995–1997 Mazda Familia (Japanese Market) 1994–1998 Mazda Lantis 1994–1998 Mazda MX-5 / Miata (no VICS until 1999) 1994–1997 Suzuki Cultus Crescent / Baleno / Esteem 1996–1998

Connecting Rods for Toyota Corolla 4AG / 4AGE GTS 1.6L-Spoilers and Bodykits Australia

Connecting Rods for Toyota Corolla 4AG / 4AGE GTS 1.6L

$799.00

Connecting Rods for Toyota Corolla 4AG / 4AGE GTS 1.6L These forged H-beam connecting rods are built for high-performance Toyota 4AG / 4AGE 1.6L engines, offering strength, reliability, and durability under racing and high-RPM conditions. Connecting Rods for Toyota Corolla 4AG / 4AGE GTS 1.6L Brand new aftermarket replacement part Forged from 4340 aircraft-grade chrome moly steel for maximum strength and durability H-beam design for reduced weight while maintaining rigidity Includes a full set of 4 rods Comes with ARP 2000 3/8" bolts (rated at 220,000 psi) Optional upgrade to ARP L19 bolts (rated at 260,000 psi) available Advertised horsepower rating: 200 HP per rod Designed to handle up to 9,000 RPM Center-to-center length: 122mm (4.803") Big end diameter: 45mm (1.772") Small end diameter: 20mm (0.787") Big end width: 21.8mm (0.858") Small end width: 21.8mm (0.858") Heat-treated, shot-peened, and CNC machined for precision and consistency Balanced to within +/- 1g per rod for smooth operation Precision rod cap alignment dowels for accurate fitment Magnetic particle tested, sonic tested, and X-rayed for flaw detection Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Forged H-Beam Connecting Rods for Subaru Impreza STI EJ20 / EJ25 2.0L / 2.5L-Spoilers and Bodykits Australia

Forged H-Beam Connecting Rods for Subaru Impreza STI EJ20 / EJ25 2.0L / 2.5L

$719.00

Forged H-Beam Connecting Rods for Subaru Impreza STI EJ20 / EJ25 2.0L / 2.5L These forged H-beam connecting rods are designed for high-performance Subaru EJ20 and EJ25 builds, offering strength, precision, and reliability for racing and high-horsepower applications. Forged H-Beam Connecting Rods for Subaru Impreza STI EJ20 / EJ25 2.0L / 2.5L Brand new aftermarket replacement part Set of 4 forged rods manufactured from SAE 4340 aircraft-grade chrome moly steel H-beam construction delivers excellent strength-to-weight ratio for performance use Equipped with ARP 2000 3/8" bolts rated at 220,000 psi – optional ARP L19 upgrade available Center-to-center length: 130.5mm (5.137") Big end: 55mm (2.165") diameter, 21.4mm (0.843") width Small end: 23mm (0.905") diameter, 21.4mm (0.843") width Suitable for builds up to 200HP per rod and engine speeds up to 9000rpm Heat-treated, shot-peened, CNC machined, and balanced within +/- 1g per rod Precision finished with tight bore tolerances, rod cap alignment dowels, and flaw detection testing (magnetic particle, sonic, and X-ray inspected) Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: Subaru Impreza WRX STI EJ20 EJ22 EJ25 Engine Subaru Legacy EJ20 EJ22 EJ25 Engine Subaru Impreza WRX STI / Forester / Legacy WRX 2.0L Turbo (EJ205 Engine) 2002–2005 Subaru Impreza WRX STi 2.0L Turbo (EJ207 Engine) 1998–present Subaru Impreza WRX 2.5L Turbo (EJ255 Engine) 2006–2014 Subaru Impreza WRX STI 2.5L Turbo (EJ257 Engine) 2004–2016 Saab 9-2X 2005–2006 Isuzu Aska 1990–1993 Subaru Legacy JDM 1989–2009 Subaru Forester JDM SF series (1997–2002) Subaru Impreza WRX 2006–2014 Subaru Forester XT 2004–2013 Subaru Outback XT 2005, 2007–2009 Subaru Impreza 1995–2001 Subaru Outback 1995–1996

Out of Stock

Front Coilover Camber Plate Top Mounts for BMW E36 318 / 323 / 325 / 328 / M3 - Green - Pair-Spoilers and Bodykits Australia

Front Coilover Camber Plate Top Mounts for BMW E36 318 / 323 / 325 / 328 / M3 - Green - Pair

$109.00

Front Coilover Camber Plate Top Mounts for BMW E36 318 / 323 / 325 / 328 / M3 - Green - Pair Upgrade your BMW E36’s suspension with these adjustable front camber plate top mounts, designed for precision handling and improved performance. Perfect for both street and drift setups, they provide a wide adjustment range while maintaining proper strut alignment. Front Coilover Camber Plate Top Mounts for BMW E36 318 / 323 / 325 / 328 / M3 - Green - Pair Brand new aftermarket replacement part Adjustable camber settings with clear timing marks Pillow ball bushing design for precise adjustment Large adjustment range without the need to cut the strut tower Maintains proper strut angle across all positions Includes replaceable urethane bushing to minimise noise and maintain proper orientation Ideal for performance driving and drifting applications Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Front Camber Plate Top Mounts for Nissan S13 / S14 / S15 / 200SX / 240SX - Gold - Pair-Spoilers and Bodykits Australia

Front Camber Plate Top Mounts for Nissan S13 / S14 / S15 / 200SX / 240SX - Gold - Pair

$129.00

Front Camber Plate Top Mounts for Nissan S13 / S14 / S15 / 200SX / 240SX - Gold - Pair Enhance alignment and handling on your Nissan with this pair of adjustable front camber plate top mounts. Finished in gold, they allow precise camber tuning for sharper steering and improved grip, perfect for street, drift, or track setups. Front Camber Plate Top Mounts for Nissan S13 / S14 / S15 / 200SX / 240SX - Gold - Pair Brand new aftermarket replacement part Quantity: Pair (2 pieces) Independent camber adjustment for accurate wheel alignment Adjustable timing marks for easy and repeatable setup Pillow ball bushing design for precision handling response Wide adjustment range while maintaining correct strut angle Replaceable urethane bushing reduces vibration and noise CNC-machined aluminium with gold anodised finish for strength and style Designed for use with aftermarket coilovers (not compatible with OEM struts) Suitable for street, drift, and circuit applications Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Front Camber Plate Top Mounts for Subaru Impreza STI GDA / GDB - Blue - Pair (2002 - 2007)-Spoilers and Bodykits Australia

Front Camber Plate Top Mounts for Subaru Impreza STI GDA / GDB - Blue - Pair (2002 - 2007)

$89.00

Front Camber Plate Top Mounts for Subaru Impreza STI GDA / GDB - Blue - Pair (2002 - 2007) Upgrade your Impreza STI’s suspension setup with this pair of adjustable front camber plate top mounts. Finished in blue, they deliver precise camber control for sharper steering response and improved tyre grip, making them ideal for street, drift, or track use. Front Camber Plate Top Mounts for Subaru Impreza STI GDA / GDB - Blue - Pair (2002 - 2007) Brand new aftermarket replacement part Independent camber adjustment for accurate wheel alignment Adjustable timing marks for easy setup and repeatability Pillow ball bushing design for improved steering feedback and precision Wide camber adjustment range while maintaining correct strut angle Replaceable urethane bushing reduces noise and vibration CNC-machined construction with blue anodised finish for strength and style Designed for use with coilover systems (not compatible with OEM struts) Suitable for daily driving, drift, and track applications Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: Subaru Impreza GDA GDB (2002-2007) Subaru Impreza STI GDA GDB (2004) Subaru Impreza Bugeye / Blobeye (2002-2005) Subaru Impreza Outback Sport (2002-2007) Saab 9-2X (2004-2005)

Front Coilover Camber Plate Top Mounts for BMW E36 318 / 320 / 323 / 325 / M3 - Gold - Pair-Spoilers and Bodykits Australia

Front Coilover Camber Plate Top Mounts for BMW E36 318 / 320 / 323 / 325 / M3 - Gold - Pair

$69.00

Front Coilover Camber Plate Top Mounts for BMW E36 318 / 320 / 323 / 325 / M3 - Gold - Pair These front camber plate top mounts are designed for BMW E36 models, giving you precise suspension adjustment and sharper handling. Built with a pillow ball design and wide adjustment range, they’re ideal for performance, drifting, and track setups. Front Coilover Camber Plate Top Mounts for BMW E36 318 / 320 / 323 / 325 / M3 - Gold - Pair Brand new aftermarket replacement part Set includes 2x front coilover camber plate top mounts (pair) Adjustable timing marks for accurate alignment Pillow ball bushing design for precise adjustment and improved steering feedback Independent camber adjustment without affecting caster Wide adjustment range without the need to cut the strut tower Maintains correct strut angle across adjustment range Replaceable urethane bushing ensures proper orientation Designed to minimise noise commonly associated with urethane bushings Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: BMW 3 Series (E36) 1991–1998 Europe BMW 3 Series (E36) 1992–1999 US & Canada BMW E36 318i, 318is, 318ic, 323i, 323ic, 323is, 325i, 325is, 325ic, 328i, 328is, 328ic, M3

Front Coilover Camber Plate Top Mounts for BMW E46 3 Series M3 - Red - Pair-Spoilers and Bodykits Australia

Front Coilover Camber Plate Top Mounts for BMW E46 3 Series M3 - Red - Pair

$99.00

Front Coilover Camber Plate Top Mounts for BMW E46 3 Series M3 - Red - Pair Upgrade the suspension setup on your BMW E46 M3 with this pair of front coilover camber plate top mounts. Designed for precision adjustment, they allow independent camber control, sharper handling, and improved alignment flexibility. Front Coilover Camber Plate Top Mounts for BMW E46 3 Series M3 - Red - Pair Brand new aftermarket replacement part Pillow ball bushing design for accurate adjustment and enhanced steering feedback Adjustable timing marks for precise alignment setup Independent camber adjustment without affecting caster Wide adjustment range allows camber and caster tuning without strut tower modification Helps maintain correct strut angle at any adjustment position Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Front Camber Plate Top Mounts for BMW E36 3 Series - Red - Pair (1992 - 1999)-Spoilers and Bodykits Australia

Front Camber Plate Top Mounts for BMW E36 3 Series - Red - Pair (1992 - 1999)

$89.00

Front Camber Plate Top Mounts for BMW E36 3 Series - Red - Pair (1992 - 1999) These camber plate top mounts are built to give your BMW E36 precise suspension tuning and sharper handling response. With a pillow ball design and wide adjustment range, they’re ideal for performance builds, drifting, and track use. Front Camber Plate Top Mounts for BMW E36 3 Series - Red - Pair (1992 - 1999) Brand new aftermarket replacement part Set includes 2x front camber plate top mounts (pair) Adjustable timing marks for accurate setup Pillow ball bushing design for precise adjustment and improved steering response Allows camber to be adjusted independently of caster Wide adjustment range without requiring strut tower modification Maintains correct strut angle at any position Replaceable urethane bushing ensures proper orientation Designed to minimise noise often associated with urethane bushings Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Front Camber Plates for Subaru Impreza GDA / GDB - Gold - Pair (2002 - 2007)-Spoilers and Bodykits Australia

Front Camber Plates for Subaru Impreza GDA / GDB - Gold - Pair (2002 - 2007)

$109.00

Front Camber Plates for Subaru Impreza GDA / GDB - Gold - Pair (2002 - 2007) These adjustable camber plates are designed to sharpen the handling of your Subaru Impreza. Built with a pillow ball bushing design, they allow precise suspension tuning while maintaining proper strut geometry and durability. Front Camber Plates for Subaru Impreza GDA / GDB - Gold - Pair (2002 - 2007) Brand new aftermarket replacement part Adjustable timing marks for accurate camber setup Pillow ball bushing design for precise adjustment and handling response Allows camber to be adjusted independently of caster Wide adjustment range without needing to cut the strut tower Maintains correct strut angle across all adjustment positions Replaceable urethane bushing ensures correct orientation Designed to reduce noise commonly associated with urethane bushings Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: Subaru Impreza 2002-2007 GDA/GDB (Wagon, 2.5RS Models) Subaru Impreza STI 2004 GDA/GDB Subaru Legacy 1994-1998 GDA/GDB Subaru Forester 2003-2008 SG Subaru Impreza Outback Sport Saab 9-2X (2004-2005)

Front Coilover Camber Plates Top Mounts for BMW E36 3 Series - Blue - Pair-Spoilers and Bodykits Australia

Front Coilover Camber Plates Top Mounts for BMW E36 3 Series - Blue - Pair

$89.00

Front Coilover Camber Plates Top Mounts for BMW E36 3 Series - Blue - Pair Improve alignment control and handling precision on your BMW E36 with this pair of front coilover camber plate top mounts. Designed with pillow ball bushings, they allow precise camber adjustments while maintaining durability and steering response. Front Coilover Camber Plates Top Mounts for BMW E36 3 Series - Blue - Pair Brand new aftermarket replacement part Pillow ball bushing design for precise adjustment and sharper steering feedback Adjustable timing marks for accurate alignment settings Independent camber adjustment without affecting caster Wide adjustment range allows setup changes without cutting the strut tower Replaceable urethane bushing for proper orientation and long-term serviceability Helps maintain proper strut angle at any position Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Front Coilover Camber Plates for BMW E46 320i / 323i / 328Ci / 330xi / M3 - Blue - Pair-Spoilers and Bodykits Australia

Front Coilover Camber Plates for BMW E46 320i / 323i / 328Ci / 330xi / M3 - Blue - Pair

$89.00

Front Coilover Camber Plates for BMW E46 320i / 323i / 328Ci / 330xi / M3 - Blue - Pair These camber plates are designed to give your BMW E46 precise suspension adjustment and sharper handling response. Ideal for performance builds and track use, they offer a wide adjustment range while maintaining proper strut geometry. Front Coilover Camber Plates for BMW E46 320i / 323i / 328Ci / 330xi / M3 - Blue - Pair Brand new aftermarket replacement part Adjustable timing marks for accurate setup Pillow ball bushing design for precise adjustment and handling feedback Independent camber adjustment without affecting caster Wide adjustment range without the need to cut the strut tower Maintains correct strut angle across the full adjustment range Replaceable urethane bushing helps maintain proper orientation Designed to minimise noise from the urethane bushing Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: BMW E46 3 Series (1998-2005) BMW E46 316i, 316i/ti, 318i/Ci, 318i/Ci/ti, 318Ci, 320i, 320i/Ci, 323i/Ci, 325i/xi/Ci/ti (EUR), 328i/Ci, 330i/xi/Ci, M3

Rear Camber Plate Top Mounts for BMW E36 3 Series M3 - Blue - Pair-Spoilers and Bodykits Australia

Rear Camber Plate Top Mounts for BMW E36 3 Series M3 - Blue - Pair

$89.00

Rear Camber Plate Top Mounts for BMW E36 3 Series M3 - Blue - Pair Enhance suspension tuning on your E36 M3 with this pair of rear camber plate top mounts. Finished in blue, they provide accurate camber adjustment for sharper handling and improved tyre contact, ideal for street, drift, or track use. Rear Camber Plate Top Mounts for BMW E36 3 Series M3 - Blue - Pair Brand new aftermarket replacement part Quantity: Pair (2 pieces) Independent camber adjustment for precise wheel alignment Adjustable timing marks for accurate setup Pillow ball bushing design for sharper response and stability Wide camber adjustment range while maintaining correct strut angle Replaceable urethane bushing helps reduce noise and vibration Strong CNC-machined construction with blue finish Designed for use with coilover springs only (not compatible with OEM stock springs) Suitable for street, drift, and circuit driving Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Front Camber Plates for Toyota Celica - Gold - Pair (2000 - 2006)-Spoilers and Bodykits Australia

Front Camber Plates for Toyota Celica - Gold - Pair (2000 - 2006)

$89.00

Front Camber Plates for Toyota Celica - Gold - Pair (2000 - 2006) Enhance front-end alignment and handling precision on your Toyota Celica with this pair of gold camber plates. Designed for adjustability, they allow independent camber tuning to suit street, drift, or track use. Front Camber Plates for Toyota Celica - Gold - Pair (2000 - 2006) Brand new aftermarket replacement part Quantity: Pair (2 pieces) Independent camber adjustment for precise alignment control Wide adjustment range while maintaining proper strut angle Allows camber and caster tuning from the top without cutting the strut tower Strong and lightweight construction with gold finish Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Front Camber Plate Top Mounts for Nissan S13 / S14 / S15 / 180SX / 200SX - Black - Pair-Spoilers and Bodykits Australia

Front Camber Plate Top Mounts for Nissan S13 / S14 / S15 / 180SX / 200SX - Black - Pair

$139.00

Front Camber Plate Top Mounts for Nissan S13 / S14 / S15 / 180SX / 200SX - Black - Pair These adjustable camber plate top mounts are designed to give your Nissan precise suspension tuning for both street and track use. With pillow ball bushings and a wide range of camber adjustment, they offer strength, control, and reliability where it counts. Front Camber Plate Top Mounts for Nissan S13 / S14 / S15 / 180SX / 200SX - Black - Pair Brand new aftermarket replacement part Pack of 2 front camber plate top mounts (pair) Adjustable timing marks for precise setup Pillow ball bushing design for accurate adjustment and handling response Allows camber to be adjusted independently of caster Wide adjustment range without requiring strut tower modification Maintains proper strut angle across adjustment range Provides correct orientation with replaceable urethane bushing Designed to minimise noise from the urethane bushing Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers Note: Please see below for details of all models this item fits Compatibility with other Models: Nissan S13 Silvia (Japan Market) 1989-1993 Nissan S13 180SX (Japan Market) 1989-1998 Nissan S13 Sileighty (Japan Market) 1998- Nissan S13 200SX (Europe/New Zealand Market) 1989-1994 Nissan S13 240SX (North America) 1989-1990 Nissan S14 Silvia (Japan Market) 1994-1998 Nissan S14 200SX (Europe/Australia/New Zealand Market) 1994-1998 Nissan S14 240SX (USA Market) 1995-1998

Front Coilover Lowering Struts for BMW X5 E53 - Adjustable Height (2000 - 2006)-Spoilers and Bodykits Australia

Front Coilover Lowering Struts for BMW X5 E53 - Adjustable Height (2000 - 2006)

$379.00

Front Coilover Lowering Struts for BMW X5 E53 - Adjustable Height (2000 - 2006) Upgrade the handling and stance of your BMW X5 E53 with these adjustable front coilover struts. Designed with durable twin-tube shocks and performance-tested springs, they deliver precise ride height control and long-lasting reliability. Front Coilover Lowering Struts for BMW X5 E53 - Adjustable Height (2000 - 2006) Brand new aftermarket replacement part Set of 2x front coilover struts (reuse OEM top mounts) Adjustable ride height for a custom stance and improved handling Adjustable pre-load spring tension for fine-tuning ride quality Front spring rate: 8 kg/mm (448 lbs/in) Spring preload range: 7–10mm Twin-tube shock design with non-adjustable damping force Components made from 6061 aluminium alloy (T6 treated) for strength and reduced weight High tensile springs tested over 600,000 cycles with less than 0.04% distortion Special surface treatment for added durability and performance Rubber boots included to protect dampers from dust and debris Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

Rear Coilover Lowering Struts for BMW X5 E53 - Adjustable Height (2000 - 2006)-Spoilers and Bodykits Australia

Rear Coilover Lowering Struts for BMW X5 E53 - Adjustable Height (2000 - 2006)

$379.00

Rear Coilover Lowering Struts for BMW X5 E53 - Adjustable Height (2000 - 2006) These rear coilover struts are designed to upgrade the stance and handling of your BMW X5 E53. Built with durable steel and aluminium components, they provide reliable performance with spring preload adjustment for a more controlled ride. Rear Coilover Lowering Struts for BMW X5 E53 - Adjustable Height (2000 - 2006) Brand new aftermarket replacement part Adjustable pre-load spring tension to fine-tune ride feel Rear spring rate: 5 kg/mm (280 lbs/in) Rear spring length: 330mm | Inner diameter: 66.5–71.5mm Recommended spring preload: 7–10mm CNC-machined aluminium top mounts and lockers for strength and reduced weight Heavy-duty steel lower mounts for durability and reliability High tensile springs tested over 600,000 cycles for strength and longevity Twin-tube shock design provides smooth handling and ride control Long rubber boots included to protect dampers from dust and debris Corrosion-resistant finish with anodised aluminium and powder-coated steel Ready to install - Professional installation recommended (no fitting instructions included) Super strong build quality Fast and reliable shipping across Australia Trusted by thousands of Aussie drivers

240 241 242 243 244

Fast Local Dispatch

Tracked Shipping on Every Order

Easy 30 Day Returns

Free Returns on Faulty Items

Ph: 1300 362 376

Mon-Fri | 9am-5pm

Email: sales@spoilersandbodykits.com.au

✅ 28,000+ Orders Shipped Australia-Wide

✅ Serving Aussie Drivers since 2016

✅ Aussie-Owned & Operated

CATEGORIES Bodykit Parts Accessories Lighting Suspension Parts Steering Parts Engine Bay Parts Interior Parts Intake & Exhaust Parts Drivetrain Parts Body Parts Fuel System Parts Brake Parts Electrical Parts Climate Control Parts

INFO & SUPPORT FAQ's About Us Contact Us Shipping Customer Reviews Why Shop With Us Buy Now Pay Later Basic Fitting Guides Bundle Deals Become an Ambassador Earn Rewards Returns Terms & Conditions Privacy Policy

GET SOCIAL Follow us on Facebook